u-boot/include/mc9sdz60.h
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

68 lines
2.0 KiB
C

/*
* Copyright (C) 2009 Marc Kleine-Budde <mkl@pengutronix.de>
*
* Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_ARCH_MC9SDZ60_H
#define __ASM_ARCH_MC9SDZ60_H
/**
* Register addresses for the MC9SDZ60
*
* @note: these match those in the kernel drivers/mxc/mcu_pmic/mc9s08dz60.h
* but not include/linux/mfd/mc9s08dz60/pmic.h
*
*/
enum mc9sdz60_reg {
MC9SDZ60_REG_VERSION = 0x00,
/* reserved 0x01 */
MC9SDZ60_REG_SECS = 0x02,
MC9SDZ60_REG_MINS = 0x03,
MC9SDZ60_REG_HRS = 0x04,
MC9SDZ60_REG_DAY = 0x05,
MC9SDZ60_REG_DATE = 0x06,
MC9SDZ60_REG_MONTH = 0x07,
MC9SDZ60_REG_YEAR = 0x08,
MC9SDZ60_REG_ALARM_SECS = 0x09,
MC9SDZ60_REG_ALARM_MINS = 0x0a,
MC9SDZ60_REG_ALARM_HRS = 0x0b,
/* reserved 0x0c */
/* reserved 0x0d */
MC9SDZ60_REG_TS_CONTROL = 0x0e,
MC9SDZ60_REG_X_LOW = 0x0f,
MC9SDZ60_REG_Y_LOW = 0x10,
MC9SDZ60_REG_XY_HIGH = 0x11,
MC9SDZ60_REG_X_LEFT_LOW = 0x12,
MC9SDZ60_REG_X_LEFT_HIGH = 0x13,
MC9SDZ60_REG_X_RIGHT = 0x14,
MC9SDZ60_REG_Y_TOP_LOW = 0x15,
MC9SDZ60_REG_Y_TOP_HIGH = 0x16,
MC9SDZ60_REG_Y_BOTTOM = 0x17,
/* reserved 0x18 */
/* reserved 0x19 */
MC9SDZ60_REG_RESET_1 = 0x1a,
MC9SDZ60_REG_RESET_2 = 0x1b,
MC9SDZ60_REG_POWER_CTL = 0x1c,
MC9SDZ60_REG_DELAY_CONFIG = 0x1d,
/* reserved 0x1e */
/* reserved 0x1f */
MC9SDZ60_REG_GPIO_1 = 0x20,
MC9SDZ60_REG_GPIO_2 = 0x21,
MC9SDZ60_REG_KPD_1 = 0x22,
MC9SDZ60_REG_KPD_2 = 0x23,
MC9SDZ60_REG_KPD_CONTROL = 0x24,
MC9SDZ60_REG_INT_ENABLE_1 = 0x25,
MC9SDZ60_REG_INT_ENABLE_2 = 0x26,
MC9SDZ60_REG_INT_FLAG_1 = 0x27,
MC9SDZ60_REG_INT_FLAG_2 = 0x28,
MC9SDZ60_REG_DES_FLAG = 0x29,
};
extern u8 mc9sdz60_reg_read(enum mc9sdz60_reg reg);
extern void mc9sdz60_reg_write(enum mc9sdz60_reg reg, u8 val);
#endif /* __ASM_ARCH_MC9SDZ60_H */