u-boot/include/usb/fusbh200.h
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

61 lines
2.2 KiB
C

/*
* Faraday USB 2.0 EHCI Controller
*
* (C) Copyright 2010 Faraday Technology
* Dante Su <dantesu@faraday-tech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _FUSBH200_H
#define _FUSBH200_H
struct fusbh200_regs {
struct {
uint32_t data[4];
} hccr; /* 0x00 - 0x0f: hccr */
struct {
uint32_t data[9];
} hcor; /* 0x10 - 0x33: hcor */
uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
uint32_t rsvd[2];
uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */
uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */
uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
};
/* EOF & Async. Schedule Sleep Timer Register */
#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */
#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */
#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
/* Bus Monitor Control Status Register */
#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */
#define BMCSR_SPD_LOW (1 << 9)
#define BMCSR_SPD_FULL (0 << 9)
#define BMCSR_SPD_MASK (3 << 9)
#define BMCSR_SPD_SHIFT 9
#define BMCSR_SPD(x) ((x >> 9) & 0x03)
#define BMCSR_VBUS (1 << 8) /* VBUS Valid */
#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */
#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */
#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */
#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */
#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */
#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/
#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/
#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/
#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/
/* Bus Monitor Interrupt Status Register */
/* Bus Monitor Interrupt Enable Register */
#define BMISR_DMAERR (1 << 4) /* DMA error */
#define BMISR_DMA (1 << 3) /* DMA complete */
#define BMISR_DEVRM (1 << 2) /* device removed */
#define BMISR_OVD (1 << 1) /* over-current detected */
#define BMISR_VBUSERR (1 << 0) /* VBUS error */
#endif