u-boot/lib/fdtdec_test.c
Simon Glass 0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00

352 lines
8.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Some very basic tests for fdtdec, accessed through test_fdtdec command.
* They are easiest to use with sandbox.
*
* Copyright (c) 2011 The Chromium OS Authors.
*/
#include <common.h>
#include <command.h>
#include <fdtdec.h>
#include <linux/libfdt.h>
#include <malloc.h>
#include <os.h>
/* The size of our test fdt blob */
#define FDT_SIZE (16 * 1024)
#define CHECK(op) ({ \
int err = op; \
if (err < 0) { \
printf("%s: %s: %s\n", __func__, #op, \
fdt_strerror(err)); \
return err; \
} \
\
err; \
})
#define CHECKVAL(op, expected) ({ \
int err = op; \
if (err != expected) { \
printf("%s: %s: expected %d, but returned %d\n",\
__func__, #op, expected, err); \
return err; \
} \
\
err; \
})
#define CHECKOK(op) CHECKVAL(op, 0)
/* maximum number of nodes / aliases to generate */
#define MAX_NODES 20
/*
* Make a test fdt
*
* @param fdt Device tree pointer
* @param size Size of device tree blob
* @param aliases Specifies alias assignments. Format is a list of items
* separated by space. Items are #a where
* # is the alias number
* a is the node to point to
* @param nodes Specifies nodes to generate (a=0, b=1), upper case
* means to create a disabled node
*/
static int make_fdt(void *fdt, int size, const char *aliases,
const char *nodes)
{
char name[20], value[20];
const char *s;
#if defined(DEBUG) && defined(CONFIG_SANDBOX)
int fd;
#endif
CHECK(fdt_create(fdt, size));
CHECK(fdt_finish_reservemap(fdt));
CHECK(fdt_begin_node(fdt, ""));
CHECK(fdt_begin_node(fdt, "aliases"));
for (s = aliases; *s;) {
sprintf(name, "i2c%c", *s);
sprintf(value, "/i2c%d@0", s[1] - 'a');
CHECK(fdt_property_string(fdt, name, value));
s += 2 + (s[2] != '\0');
}
CHECK(fdt_end_node(fdt));
for (s = nodes; *s; s++) {
sprintf(value, "i2c%d@0", (*s & 0xdf) - 'A');
CHECK(fdt_begin_node(fdt, value));
CHECK(fdt_property_string(fdt, "compatible",
fdtdec_get_compatible(COMPAT_UNKNOWN)));
if (*s <= 'Z')
CHECK(fdt_property_string(fdt, "status", "disabled"));
CHECK(fdt_end_node(fdt));
}
CHECK(fdt_end_node(fdt));
CHECK(fdt_finish(fdt));
CHECK(fdt_pack(fdt));
#if defined(DEBUG) && defined(CONFIG_SANDBOX)
fd = os_open("/tmp/fdtdec-text.dtb", OS_O_CREAT | OS_O_WRONLY);
if (fd == -1) {
printf("Could not open .dtb file to write\n");
return -1;
}
os_write(fd, fdt, size);
os_close(fd);
#endif
return 0;
}
static int run_test(const char *aliases, const char *nodes, const char *expect)
{
int list[MAX_NODES];
const char *s;
void *blob;
int i;
blob = malloc(FDT_SIZE);
if (!blob) {
printf("%s: out of memory\n", __func__);
return 1;
}
printf("aliases=%s, nodes=%s, expect=%s: ", aliases, nodes, expect);
CHECKVAL(make_fdt(blob, FDT_SIZE, aliases, nodes), 0);
CHECKVAL(fdtdec_find_aliases_for_id(blob, "i2c",
COMPAT_UNKNOWN,
list, ARRAY_SIZE(list)), (int)strlen(expect));
/* Check we got the right ones */
for (i = 0, s = expect; *s; s++, i++) {
int want = *s;
const char *name;
int got = ' ';
name = list[i] ? fdt_get_name(blob, list[i], NULL) : NULL;
if (name)
got = name[3] + 'a' - '0';
if (got != want) {
printf("Position %d: Expected '%c', got '%c' ('%s')\n",
i, want, got, name);
return 1;
}
}
printf("pass\n");
free(blob);
return 0;
}
static int make_fdt_carveout_device(void *fdt, uint32_t na, uint32_t ns)
{
const char *basename = "/display";
struct fdt_memory carveout = {
#ifdef CONFIG_PHYS_64BIT
.start = 0x180000000,
.end = 0x18fffffff,
#else
.start = 0x80000000,
.end = 0x8fffffff,
#endif
};
fdt32_t cells[4], *ptr = cells;
uint32_t upper, lower;
fdt_size_t size;
char name[32];
int offset;
/* store one or two address cells */
upper = upper_32_bits(carveout.start);
lower = lower_32_bits(carveout.start);
if (na > 1 && upper > 0)
snprintf(name, sizeof(name), "%s@%x,%x", basename, upper,
lower);
else
snprintf(name, sizeof(name), "%s@%x", basename, lower);
if (na > 1)
*ptr++ = cpu_to_fdt32(upper);
*ptr++ = cpu_to_fdt32(lower);
/* store one or two size cells */
size = carveout.end - carveout.start + 1;
upper = upper_32_bits(size);
lower = lower_32_bits(size);
if (ns > 1)
*ptr++ = cpu_to_fdt32(upper);
*ptr++ = cpu_to_fdt32(lower);
offset = CHECK(fdt_add_subnode(fdt, 0, name + 1));
CHECK(fdt_setprop(fdt, offset, "reg", cells, (na + ns) * sizeof(*cells)));
return fdtdec_set_carveout(fdt, name, "memory-region", 0,
"framebuffer", &carveout);
}
static int check_fdt_carveout(void *fdt, uint32_t address_cells,
uint32_t size_cells)
{
#ifdef CONFIG_PHYS_64BIT
const char *name = "/display@1,80000000";
const struct fdt_memory expected = {
.start = 0x180000000,
.end = 0x18fffffff,
};
#else
const char *name = "/display@80000000";
const struct fdt_memory expected = {
.start = 0x80000000,
.end = 0x8fffffff,
};
#endif
struct fdt_memory carveout;
printf("carveout: %pap-%pap na=%u ns=%u: ", &expected.start,
&expected.end, address_cells, size_cells);
CHECK(fdtdec_get_carveout(fdt, name, "memory-region", 0, &carveout));
if ((carveout.start != expected.start) ||
(carveout.end != expected.end)) {
printf("carveout: %pap-%pap, expected %pap-%pap\n",
&carveout.start, &carveout.end,
&expected.start, &expected.end);
return 1;
}
printf("pass\n");
return 0;
}
static int make_fdt_carveout(void *fdt, int size, uint32_t address_cells,
uint32_t size_cells)
{
fdt32_t na = cpu_to_fdt32(address_cells);
fdt32_t ns = cpu_to_fdt32(size_cells);
#if defined(DEBUG) && defined(CONFIG_SANDBOX)
char filename[512];
int fd;
#endif
int err;
CHECK(fdt_create(fdt, size));
CHECK(fdt_finish_reservemap(fdt));
CHECK(fdt_begin_node(fdt, ""));
CHECK(fdt_property(fdt, "#address-cells", &na, sizeof(na)));
CHECK(fdt_property(fdt, "#size-cells", &ns, sizeof(ns)));
CHECK(fdt_end_node(fdt));
CHECK(fdt_finish(fdt));
CHECK(fdt_pack(fdt));
CHECK(fdt_open_into(fdt, fdt, FDT_SIZE));
err = make_fdt_carveout_device(fdt, address_cells, size_cells);
#if defined(DEBUG) && defined(CONFIG_SANDBOX)
snprintf(filename, sizeof(filename), "/tmp/fdtdec-carveout-%u-%u.dtb",
address_cells, size_cells);
fd = os_open(filename, OS_O_CREAT | OS_O_WRONLY);
if (fd < 0) {
printf("could not open .dtb file to write\n");
goto out;
}
os_write(fd, fdt, size);
os_close(fd);
out:
#endif
return err;
}
static int check_carveout(void)
{
void *fdt;
fdt = malloc(FDT_SIZE);
if (!fdt) {
printf("%s: out of memory\n", __func__);
return 1;
}
#ifndef CONFIG_PHYS_64BIT
CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 1, 1), 0);
CHECKOK(check_fdt_carveout(fdt, 1, 1));
CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 1, 2), 0);
CHECKOK(check_fdt_carveout(fdt, 1, 2));
#else
CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 1, 1), -FDT_ERR_BADVALUE);
CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 1, 2), -FDT_ERR_BADVALUE);
#endif
CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 2, 1), 0);
CHECKOK(check_fdt_carveout(fdt, 2, 1));
CHECKVAL(make_fdt_carveout(fdt, FDT_SIZE, 2, 2), 0);
CHECKOK(check_fdt_carveout(fdt, 2, 2));
free(fdt);
return 0;
}
static int do_test_fdtdec(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
/* basic tests */
CHECKOK(run_test("", "", ""));
CHECKOK(run_test("1e 3d", "", ""));
/*
* 'a' represents 0, 'b' represents 1, etc.
* The first character is the alias number, the second is the node
* number. So the params mean:
* 0a 1b : point alias 0 to node 0 (a), alias 1 to node 1(b)
* ab : to create nodes 0 and 1 (a and b)
* ab : we expect the function to return two nodes, in
* the order 0, 1
*/
CHECKOK(run_test("0a 1b", "ab", "ab"));
CHECKOK(run_test("0a 1c", "ab", "ab"));
CHECKOK(run_test("1c", "ab", "ab"));
CHECKOK(run_test("1b", "ab", "ab"));
CHECKOK(run_test("0b", "ab", "ba"));
CHECKOK(run_test("0b 2d", "dbc", "bcd"));
CHECKOK(run_test("0d 3a 1c 2b", "dbac", "dcba"));
/* things with holes */
CHECKOK(run_test("1b 3d", "dbc", "cb d"));
CHECKOK(run_test("1e 3d", "dbc", "bc d"));
/* no aliases */
CHECKOK(run_test("", "dbac", "dbac"));
/* disabled nodes */
CHECKOK(run_test("0d 3a 1c 2b", "dBac", "dc a"));
CHECKOK(run_test("0b 2d", "DBc", "c"));
CHECKOK(run_test("0b 4d 2c", "DBc", " c"));
/* conflicting aliases - first one gets it */
CHECKOK(run_test("2a 1a 0a", "a", " a"));
CHECKOK(run_test("0a 1a 2a", "a", "a"));
CHECKOK(check_carveout());
printf("Test passed\n");
return 0;
}
U_BOOT_CMD(
test_fdtdec, 3, 1, do_test_fdtdec,
"test_fdtdec",
"Run tests for fdtdec library");