u-boot/drivers/gpio/axp_gpio.c
Chen-Yu Tsai 81a8aa3a39 sunxi: axp: Generalize register macros for VBUS drive GPIO
VBUS drive is supported on AXP221 and later PMICs. Rework the macros
so we can support this on later PMICs without too much work.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-31 17:03:52 +02:00

181 lines
3.8 KiB
C

/*
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
*
* X-Powers AXP Power Management ICs gpio driver
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pmic_bus.h>
#include <asm/gpio.h>
#include <axp_pmic.h>
#include <dm.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/root.h>
#include <errno.h>
static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val);
static u8 axp_get_gpio_ctrl_reg(unsigned pin)
{
switch (pin) {
case 0: return AXP_GPIO0_CTRL;
case 1: return AXP_GPIO1_CTRL;
#ifdef AXP_GPIO2_CTRL
case 2: return AXP_GPIO2_CTRL;
#endif
#ifdef AXP_GPIO3_CTRL
case 3: return AXP_GPIO3_CTRL;
#endif
}
return 0;
}
static int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
{
u8 reg;
switch (pin) {
#ifndef CONFIG_AXP152_POWER /* NA on axp152 */
case SUNXI_GPIO_AXP0_VBUS_DETECT:
return 0;
#endif
default:
reg = axp_get_gpio_ctrl_reg(pin);
if (reg == 0)
return -EINVAL;
return pmic_bus_write(reg, AXP_GPIO_CTRL_INPUT);
}
}
static int axp_gpio_direction_output(struct udevice *dev, unsigned pin,
int val)
{
__maybe_unused int ret;
u8 reg;
switch (pin) {
#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
/* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
ret = pmic_bus_clrbits(AXP_MISC_CTRL,
AXP_MISC_CTRL_N_VBUSEN_FUNC);
if (ret)
return ret;
return axp_gpio_set_value(dev, pin, val);
#endif
default:
reg = axp_get_gpio_ctrl_reg(pin);
if (reg == 0)
return -EINVAL;
return pmic_bus_write(reg, val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
AXP_GPIO_CTRL_OUTPUT_LOW);
}
}
static int axp_gpio_get_value(struct udevice *dev, unsigned pin)
{
u8 reg, val, mask;
int ret;
switch (pin) {
#ifndef CONFIG_AXP152_POWER /* NA on axp152 */
case SUNXI_GPIO_AXP0_VBUS_DETECT:
ret = pmic_bus_read(AXP_POWER_STATUS, &val);
mask = AXP_POWER_STATUS_VBUS_PRESENT;
break;
#endif
#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
/* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
ret = pmic_bus_read(AXP_VBUS_IPSOUT, &val);
mask = AXP_VBUS_IPSOUT_DRIVEBUS;
break;
#endif
default:
reg = axp_get_gpio_ctrl_reg(pin);
if (reg == 0)
return -EINVAL;
ret = pmic_bus_read(AXP_GPIO_STATE, &val);
mask = 1 << (pin + AXP_GPIO_STATE_OFFSET);
}
if (ret)
return ret;
return (val & mask) ? 1 : 0;
}
static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
{
u8 reg;
switch (pin) {
#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
/* Only available on later PMICs */
case SUNXI_GPIO_AXP0_VBUS_ENABLE:
if (val)
return pmic_bus_setbits(AXP_VBUS_IPSOUT,
AXP_VBUS_IPSOUT_DRIVEBUS);
else
return pmic_bus_clrbits(AXP_VBUS_IPSOUT,
AXP_VBUS_IPSOUT_DRIVEBUS);
#endif
default:
reg = axp_get_gpio_ctrl_reg(pin);
if (reg == 0)
return -EINVAL;
return pmic_bus_write(reg, val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
AXP_GPIO_CTRL_OUTPUT_LOW);
}
}
static const struct dm_gpio_ops gpio_axp_ops = {
.direction_input = axp_gpio_direction_input,
.direction_output = axp_gpio_direction_output,
.get_value = axp_gpio_get_value,
.set_value = axp_gpio_set_value,
};
static int gpio_axp_probe(struct udevice *dev)
{
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
/* Tell the uclass how many GPIOs we have */
uc_priv->bank_name = strdup(SUNXI_GPIO_AXP0_PREFIX);
uc_priv->gpio_count = SUNXI_GPIO_AXP0_GPIO_COUNT;
return 0;
}
U_BOOT_DRIVER(gpio_axp) = {
.name = "gpio_axp",
.id = UCLASS_GPIO,
.ops = &gpio_axp_ops,
.probe = gpio_axp_probe,
};
int axp_gpio_init(void)
{
struct udevice *dev;
int ret;
ret = pmic_bus_init();
if (ret)
return ret;
/* There is no devicetree support for the axp yet, so bind directly */
ret = device_bind_driver(dm_root(), "gpio_axp", "AXP-gpio", &dev);
if (ret)
return ret;
return 0;
}