78592c094e
Most AXP PMICs feature a "startup source" register, which keeps information about how the PMIC started operation. Bit 0 in there means it has been started by "plugging in the power cable". Define a symbol in each PMIC's header file to be able to use that register and bit later on. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
69 lines
2.3 KiB
C
69 lines
2.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
|
|
*
|
|
* X-Powers AXP221 Power Management IC driver
|
|
*/
|
|
|
|
/* Page 0 addresses */
|
|
#define AXP221_CHIP_ID 0x03
|
|
#define AXP221_OUTPUT_CTRL1 0x10
|
|
#define AXP221_OUTPUT_CTRL1_DCDC0_EN (1 << 0)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC1_EN (1 << 1)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC2_EN (1 << 2)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC3_EN (1 << 3)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC4_EN (1 << 4)
|
|
#define AXP221_OUTPUT_CTRL1_DCDC5_EN (1 << 5)
|
|
#define AXP221_OUTPUT_CTRL1_ALDO1_EN (1 << 6)
|
|
#define AXP221_OUTPUT_CTRL1_ALDO2_EN (1 << 7)
|
|
#define AXP221_OUTPUT_CTRL2 0x12
|
|
#define AXP221_OUTPUT_CTRL2_ELDO1_EN (1 << 0)
|
|
#define AXP221_OUTPUT_CTRL2_ELDO2_EN (1 << 1)
|
|
#define AXP221_OUTPUT_CTRL2_ELDO3_EN (1 << 2)
|
|
#define AXP221_OUTPUT_CTRL2_DLDO1_EN (1 << 3)
|
|
#define AXP221_OUTPUT_CTRL2_DLDO2_EN (1 << 4)
|
|
#define AXP221_OUTPUT_CTRL2_DLDO3_EN (1 << 5)
|
|
#define AXP221_OUTPUT_CTRL2_DLDO4_EN (1 << 6)
|
|
#define AXP221_OUTPUT_CTRL2_DCDC1SW_EN (1 << 7)
|
|
#define AXP221_OUTPUT_CTRL3 0x13
|
|
#define AXP221_OUTPUT_CTRL3_ALDO3_EN (1 << 7)
|
|
#define AXP221_DLDO1_CTRL 0x15
|
|
#define AXP221_DLDO2_CTRL 0x16
|
|
#define AXP221_DLDO3_CTRL 0x17
|
|
#define AXP221_DLDO4_CTRL 0x18
|
|
#define AXP221_ELDO1_CTRL 0x19
|
|
#define AXP221_ELDO2_CTRL 0x1a
|
|
#define AXP221_ELDO3_CTRL 0x1b
|
|
#define AXP221_DCDC1_CTRL 0x21
|
|
#define AXP221_DCDC2_CTRL 0x22
|
|
#define AXP221_DCDC3_CTRL 0x23
|
|
#define AXP221_DCDC4_CTRL 0x24
|
|
#define AXP221_DCDC5_CTRL 0x25
|
|
#define AXP221_ALDO1_CTRL 0x28
|
|
#define AXP221_ALDO2_CTRL 0x29
|
|
#define AXP221_ALDO3_CTRL 0x2a
|
|
#define AXP221_SHUTDOWN 0x32
|
|
#define AXP221_SHUTDOWN_POWEROFF (1 << 7)
|
|
#define AXP221_PAGE 0xff
|
|
|
|
/* Page 1 addresses */
|
|
#define AXP221_SID 0x20
|
|
|
|
/* For axp_gpio.c */
|
|
#ifdef CONFIG_AXP221_POWER
|
|
#define AXP_POWER_STATUS 0x00
|
|
#define AXP_POWER_STATUS_ALDO_IN BIT(0)
|
|
#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5)
|
|
#define AXP_VBUS_IPSOUT 0x30
|
|
#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2)
|
|
#define AXP_MISC_CTRL 0x8f
|
|
#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
|
|
#define AXP_GPIO0_CTRL 0x90
|
|
#define AXP_GPIO1_CTRL 0x92
|
|
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
|
|
#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
|
|
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
|
|
#define AXP_GPIO_STATE 0x94
|
|
#define AXP_GPIO_STATE_OFFSET 0
|
|
#endif
|