c03f4da187
The DT properties for the "enable-arbiter" and "keep-config" config
knobs were previously named inconsistently:
- The u-boot driver used "nand-enable-arbiter" and "nand-keep-config"
names, without Marvell prefixes.
- The Linux driver uses "marvell,nand-keep-config" ("enable-arbiter"
does not exist anymore in recent kernels, but it also used to be
"marvell,nand-enable-arbiter").
- The device trees almost all use "marvell," prefixed names, except for
one single instance of "nand-enable-arbiter" without vendor prefix.
This commit standardizes on the vendor prefixed version, making the
u-boot driver read from DT props "marvell,nand-enable-arbiter" and
"marvell,nand-keep-config". The one device tree using the unprefixed
version is also changed to use the new naming.
This has the side effect of making the previously no-op "marvell,"
config knobs already present in some DTs actually do something. This was
likely the original intention of the DT authors, but note that this
commit was not tested on every single impacted board.
Signed-off-by: Pierre Bourdon <delroth@gmail.com>
360 lines
10 KiB
Plaintext
360 lines
10 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016- 2021 Marvell International Ltd.
|
|
*/
|
|
|
|
/*
|
|
* Generic Device Tree describing Marvell Armada CP-110 device
|
|
*/
|
|
|
|
#include <dt-bindings/comphy/comphy_data.h>
|
|
|
|
#define U64_TO_U32_H(addr) (((addr) >> 32) & 0xffffffff)
|
|
#define U64_TO_U32_L(addr) ((addr) & 0xffffffff)
|
|
|
|
#define CP110_PCIEx_REG0_BASE(iface) \
|
|
(CP110_BASE + 0x600000 + (iface) * 0x20000)
|
|
#define CP110_PCIEx_REG1_BASE(iface) \
|
|
(CP110_PCIEx_CPU_MEM_BASE(iface) + CP110_PCIE_MEM_SIZE(iface))
|
|
#define CP110_PCIE_EP_REG_BASE(iface) (CP110_BASE + 0x600000 + \
|
|
(iface) * 0x4000)
|
|
|
|
/ {
|
|
CP110_NAME {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
config-space {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gic>;
|
|
ranges = <0x0 U64_TO_U32_H(CP110_BASE) U64_TO_U32_L(CP110_BASE) 0x2000000>;
|
|
|
|
CP110_LABEL(mdio): mdio@12a200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "marvell,orion-mdio";
|
|
reg = <0x12a200 0x10>;
|
|
device-name = CP110_STRING_LABEL(mdio);
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(xmdio): mdio@12a600 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "marvell,xmdio";
|
|
reg = <0x12a600 0x200>;
|
|
device-name = CP110_STRING_LABEL(xmdio);
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(sar-reg) {
|
|
compatible = "marvell,sample-at-reset-common",
|
|
"marvell,sample-at-reset-cp110";
|
|
reg = <0x400200 0x8>;
|
|
sar-driver = "cp110_sar";
|
|
sar-name = CP110_STRING_LABEL(sar);
|
|
status = "okay";
|
|
};
|
|
|
|
CP110_LABEL(syscon0): system-controller@440000 {
|
|
compatible = "marvell,cp110-system-controller0",
|
|
"syscon";
|
|
reg = <0x440000 0x1000>;
|
|
#clock-cells = <2>;
|
|
core-clock-output-names =
|
|
"cpm-apll", "cpm-ppv2-core", "cpm-eip",
|
|
"cpm-core", "cpm-nand-core";
|
|
gate-clock-output-names =
|
|
"cpm-audio", "cpm-communit", "cpm-nand",
|
|
"cpm-ppv2", "cpm-sdio", "cpm-mg-domain",
|
|
"cpm-mg-core", "cpm-xor1", "cpm-xor0",
|
|
"cpm-gop-dp", "none", "cpm-pcie_x10",
|
|
"cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor",
|
|
"cpm-sata", "cpm-sata-usb", "cpm-main",
|
|
"cpm-sd-mmc", "none", "none",
|
|
"cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1",
|
|
"cpm-usb3dev", "cpm-eip150", "cpm-eip197";
|
|
};
|
|
|
|
CP110_LABEL(pinctl): pinctl@440000 {
|
|
compatible = "marvell,mvebu-pinctrl";
|
|
reg = <0x440000 0x20>;
|
|
pin-count = <63>;
|
|
max-func = <0xf>;
|
|
};
|
|
|
|
CP110_LABEL(gpio0): gpio@440100 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x440100 0x40>;
|
|
ngpios = <32>;
|
|
gpiobase = <20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
CP110_LABEL(gpio1): gpio@440140 {
|
|
compatible = "marvell,orion-gpio";
|
|
reg = <0x440140 0x40>;
|
|
ngpios = <31>;
|
|
gpiobase = <52>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
CP110_LABEL(sata0): sata@540000 {
|
|
compatible = "marvell,armada-8k-ahci";
|
|
reg = <0x540000 0x30000>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(usb3_0): usb3@500000 {
|
|
compatible = "marvell,armada-8k-xhci",
|
|
"generic-xhci";
|
|
reg = <0x500000 0x4000>;
|
|
dma-coherent;
|
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 22>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(usb3_1): usb3@510000 {
|
|
compatible = "marvell,armada-8k-xhci",
|
|
"generic-xhci";
|
|
reg = <0x510000 0x4000>;
|
|
dma-coherent;
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 23>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(spi0): spi@700600 {
|
|
compatible = "marvell,armada-380-spi";
|
|
reg = <0x700600 0x50>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
cell-index = <1>;
|
|
spi-max-frequency = <50000000>;
|
|
clocks = <&CP110_LABEL(syscon0) 0 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(spi1): spi@700680 {
|
|
compatible = "marvell,armada-380-spi";
|
|
reg = <0x700680 0x50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <2>;
|
|
spi-max-frequency = <50000000>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 21>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(i2c0): i2c@701000 {
|
|
compatible = "marvell,mv78230-i2c";
|
|
reg = <0x701000 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 21>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(i2c1): i2c@701100 {
|
|
compatible = "marvell,mv78230-i2c";
|
|
reg = <0x701100 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 21>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(mss_i2c0): i2c@211000 {
|
|
compatible = "marvell,mv78230-i2c";
|
|
reg = <0x211000 0x20>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(comphy): comphy@441000 {
|
|
compatible = "marvell,mvebu-comphy", "marvell,comphy-cp110";
|
|
reg = <0x441000 0x8>,
|
|
<0x120000 0x8>;
|
|
mux-bitcount = <4>;
|
|
max-lanes = <6>;
|
|
};
|
|
|
|
CP110_LABEL(utmi): utmi@580000 {
|
|
compatible = "marvell,mvebu-utmi";
|
|
reg = <0x580000 0xc>; /* utmi-common-pll */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
CP110_LABEL(utmi0): utmi@58000c {
|
|
compatible = "marvell,mvebu-utmi-2.6.0";
|
|
reg = <0x58000c 0x100>,/* utmi-unit */
|
|
<0x440420 0x4>, /* usb-cfg */
|
|
<0x440440 0x4>; /* utmi-cfg */
|
|
utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(utmi1): utmi@58100c {
|
|
compatible = "marvell,mvebu-utmi-2.6.0";
|
|
reg = <0x58100c 0x100>,/* utmi-unit */
|
|
<0x440420 0x4>, /* usb-cfg */
|
|
<0x440444 0x4>; /* utmi-cfg */
|
|
utmi-port = <UTMI_PHY_TO_USB3_HOST1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
CP110_LABEL(sdhci0): sdhci@780000 {
|
|
compatible = "marvell,armada-8k-sdhci";
|
|
reg = <0x780000 0x300>;
|
|
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
dma-coherent;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(nand): nand@720000 {
|
|
compatible = "marvell,armada-8k-nand-controller",
|
|
"marvell,armada370-nand-controller";
|
|
reg = <0x720000 0x54>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 2>;
|
|
marvell,nand-enable-arbiter;
|
|
num-cs = <1>;
|
|
nand-ecc-strength = <8>;
|
|
nand-ecc-step-size = <512>;
|
|
marvell,system-controller = <&CP110_LABEL(syscon0)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(ethernet): ethernet@0 {
|
|
compatible = "marvell,armada-7k-pp22";
|
|
reg = <0x0 0x100000>, <0x129000 0xb000>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 3>, <&CP110_LABEL(syscon0) 1 9>, <&CP110_LABEL(syscon0) 1 5>;
|
|
clock-names = "pp_clk", "gop_clk", "mg_clk";
|
|
status = "disabled";
|
|
dma-coherent;
|
|
|
|
CP110_LABEL(eth0): eth0 {
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
port-id = <0>;
|
|
gop-port-id = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(eth1): eth1 {
|
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
|
port-id = <1>;
|
|
gop-port-id = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(eth2): eth2 {
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
|
port-id = <2>;
|
|
gop-port-id = <3>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
CP110_LABEL(pcie0): pcie0@600000 {
|
|
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
|
|
reg =
|
|
<U64_TO_U32_H(CP110_PCIEx_REG0_BASE(0)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(0)) 0 0x10000>,
|
|
/* Last 512KB of mem space */
|
|
<U64_TO_U32_H(CP110_PCIEx_REG1_BASE(0)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(0)) 0 0x80000>;
|
|
reg-names = "ctrl", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
device_type = "pci";
|
|
dma-coherent;
|
|
|
|
bus-range = <0 0xff>;
|
|
ranges =
|
|
/* non-prefetchable memory */
|
|
<CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(0))
|
|
U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(0)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(0))
|
|
U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(0))
|
|
U64_TO_U32_H(CP110_PCIE_MEM_SIZE(0)) U64_TO_U32_L(CP110_PCIE_MEM_SIZE(0))>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
num-lanes = <1>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 13>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(pcie1): pcie1@620000 {
|
|
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
|
|
reg =
|
|
<U64_TO_U32_H(CP110_PCIEx_REG0_BASE(1)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(1)) 0 0x10000>,
|
|
/* Last 512KB of mem space */
|
|
<U64_TO_U32_H(CP110_PCIEx_REG1_BASE(1)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(1)) 0 0x80000>;
|
|
reg-names = "ctrl", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
device_type = "pci";
|
|
dma-coherent;
|
|
|
|
bus-range = <0 0xff>;
|
|
ranges =
|
|
/* non-prefetchable memory */
|
|
<CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(1))
|
|
U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(1)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(1))
|
|
U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(1)) U64_TO_U32_H(CP110_PCIE_MEM_SIZE(1))
|
|
U64_TO_U32_L(CP110_PCIE_MEM_SIZE(1))>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
num-lanes = <1>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 11>;
|
|
status = "disabled";
|
|
};
|
|
|
|
CP110_LABEL(pcie2): pcie2@640000 {
|
|
compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
|
|
reg =
|
|
<U64_TO_U32_H(CP110_PCIEx_REG0_BASE(2)) U64_TO_U32_L(CP110_PCIEx_REG0_BASE(2)) 0 0x10000>,
|
|
/* Last 64KB of mem space */
|
|
<U64_TO_U32_H(CP110_PCIEx_REG1_BASE(2)) U64_TO_U32_L(CP110_PCIEx_REG1_BASE(2)) 0 0x80000>;
|
|
reg-names = "ctrl", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
device_type = "pci";
|
|
dma-coherent;
|
|
|
|
bus-range = <0 0xff>;
|
|
ranges =
|
|
/* non-prefetchable memory */
|
|
<CP110_PCIE_BUS_MEM_CFG U64_TO_U32_H(CP110_PCIEx_BUS_MEM_BASE(2))
|
|
U64_TO_U32_L(CP110_PCIEx_BUS_MEM_BASE(2)) U64_TO_U32_H(CP110_PCIEx_CPU_MEM_BASE(2))
|
|
U64_TO_U32_L(CP110_PCIEx_CPU_MEM_BASE(2)) U64_TO_U32_H(CP110_PCIE_MEM_SIZE(2))
|
|
U64_TO_U32_L(CP110_PCIE_MEM_SIZE(2))>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
num-lanes = <1>;
|
|
clocks = <&CP110_LABEL(syscon0) 1 12>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|