u-boot/arch/arm/dts/imx8mm-kontron-bl-common-u-boot.dtsi
Tim Harvey 93cac45c97 arm: dts: imx8m: move CAAM nodes into common u-boot.dtsi
Move the crypto and sec_jr* nodes from board-specific
u-boot.dtsi files into the common files. Additionally protect the
nodes with ifdef CONFIG_FSL_CAAM as they don't serve any purpose if
that is not enabled.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2023-10-16 08:46:01 +02:00

126 lines
1.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Copyright (C) 2019 Kontron Electronics GmbH
*/
#include "imx8mm-u-boot.dtsi"
/ {
aliases {
usb0 = &usbotg1;
usb1 = &usbotg2;
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
bootph-pre-ram;
};
};
&i2c1 {
bootph-pre-ram;
bootph-all;
};
&i2c2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
};
&iomuxc {
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
>;
};
};
&pinctrl_ecspi1 {
bootph-pre-ram;
};
&pinctrl_i2c1 {
bootph-pre-ram;
};
&pinctrl_pmic {
bootph-pre-ram;
};
&pinctrl_uart3 {
bootph-pre-ram;
bootph-all;
};
&pinctrl_usdhc1 {
bootph-pre-ram;
};
&pinctrl_usdhc1_100mhz {
bootph-pre-ram;
};
&pinctrl_usdhc1_200mhz {
bootph-pre-ram;
};
&pinctrl_usdhc2 {
bootph-pre-ram;
};
&pca9450 {
bootph-pre-ram;
};
&{/soc@0/bus@30800000/i2c@30a20000/pmic@25/regulators} {
bootph-pre-ram;
};
&ecspi1 {
bootph-pre-ram;
};
&gpio1 {
bootph-pre-ram;
};
&gpio2 {
bootph-pre-ram;
};
&gpio3 {
bootph-pre-ram;
};
&gpio4 {
bootph-pre-ram;
};
&gpio5 {
bootph-pre-ram;
};
&uart3 {
bootph-pre-ram;
bootph-all;
};
&usdhc1 {
bootph-pre-ram;
};
&usdhc2 {
bootph-pre-ram;
};
&wdog1 {
bootph-pre-ram;
};
&pinctrl_wdog {
bootph-pre-ram;
};