Embedded_Projects/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7983de7e9d
u-boot/arch/arm/dts/k3-am625-beagleplay.dts
Nishanth Menon 0d33f5281a arm: dts: k3-am625: Sync with kernel v6.6-rc1 
Sync device tree with v6.6-rc1

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2023-09-19 09:13:19 -04:00

909 lines
25 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* https://beagleplay.org/
*
* Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
* Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "k3-am625.dtsi"
/ {
compatible = "beagle,am625-beagleplay", "ti,am625";
model = "BeagleBoard.org BeaglePlay";
aliases {
ethernet0 = &cpsw_port1;
ethernet1 = &cpsw_port2;
gpio0 = &main_gpio0;
gpio1 = &main_gpio1;
gpio2 = &mcu_gpio0;
i2c0 = &main_i2c0;
i2c1 = &main_i2c1;
i2c2 = &main_i2c2;
i2c3 = &main_i2c3;
i2c4 = &wkup_i2c0;
i2c5 = &mcu_i2c0;
mdio-gpio0 = &mdio0;
mmc0 = &sdhci0;
mmc1 = &sdhci1;
mmc2 = &sdhci2;
rtc0 = &rtc;
serial0 = &main_uart5;
serial1 = &main_uart6;
serial2 = &main_uart0;
usb0 = &usb0;
usb1 = &usb1;
};
chosen {
stdout-path = "serial2:115200n8";
};
memory@80000000 {
device_type = "memory";
/* 2G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
ramoops: ramoops@9ca00000 {
compatible = "ramoops";
reg = <0x00 0x9c700000 0x00 0x00100000>;
record-size = <0x8000>;
console-size = <0x8000>;
ftrace-size = <0x00>;
pmsg-size = <0x8000>;
};
secure_tfa_ddr: tfa@9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
no-map;
};
secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>;
no-map;
};
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9db00000 0x00 0xc00000>;
no-map;
};
};
vsys_5v0: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "vsys_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vdd_3v3: regulator-2 {
/* output of TLV62595DMQR-U12 */
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vsys_5v0>;
regulator-always-on;
regulator-boot-on;
};
wlan_en: regulator-3 {
/* OUTPUT of SN74AVC2T244DQMR */
compatible = "regulator-fixed";
regulator-name = "wlan_en";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
regulator-always-on;
vin-supply = <&vdd_3v3>;
gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_en_pins_default>;
};
vdd_3v3_sd: regulator-4 {
/* output of TPS22918DBVR-U21 */
pinctrl-names = "default";
pinctrl-0 = <&vdd_3v3_sd_pins_default>;
compatible = "regulator-fixed";
regulator-name = "vdd_3v3_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
regulator-always-on;
vin-supply = <&vdd_3v3>;
gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
};
vdd_sd_dv: regulator-5 {
compatible = "regulator-gpio";
regulator-name = "sd_hs200_switch";
pinctrl-names = "default";
pinctrl-0 = <&vdd_sd_dv_pins_default>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
vin-supply = <&ldo1_reg>;
gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
states = <1800000 0x0>,
<3300000 0x1>;
};
leds {
compatible = "gpio-leds";
led-0 {
gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
function = LED_FUNCTION_HEARTBEAT;
default-state = "off";
};
led-1 {
gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "disk-activity";
function = LED_FUNCTION_DISK_ACTIVITY;
default-state = "keep";
};
led-2 {
gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_CPU;
};
led-3 {
gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_LAN;
};
led-4 {
gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_WLAN;
};
};
gpio_keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&usr_button_pins_default>;
usr: button-usr {
label = "User Key";
linux,code = <BTN_0>;
gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
};
};
hdmi0: connector-hdmi {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&it66121_out>;
};
};
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "it66121 HDMI";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
simple-audio-card,frame-master = <&hdmi_dailink_master>;
hdmi_dailink_master: simple-audio-card,cpu {
sound-dai = <&mcasp1>;
system-clock-direction-out;
};
simple-audio-card,codec {
sound-dai = <&it66121>;
};
};
/* Workaround for errata i2329 - just use mdio bitbang */
mdio0: mdio {
compatible = "virtual,mdio-gpio";
pinctrl-names = "default";
pinctrl-0 = <&mdio0_pins_default>;
gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */
<&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */
#address-cells = <1>;
#size-cells = <0>;
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
};
cpsw3g_phy1: ethernet-phy@1 {
reg = <1>;
reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
reset-assert-us = <25>;
reset-deassert-us = <60000>; /* T2 */
};
};
};
&main_pmx0 {
gpio0_pins_default: gpio0-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
>;
};
vdd_sd_dv_pins_default: vdd-sd-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
>;
};
usr_button_pins_default: usr-button-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
>;
};
grove_pins_default: grove-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
>;
};
local_i2c_pins_default: local-i2c-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
>;
};
i2c2_1v8_pins_default: i2c2-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
>;
};
mdio0_pins_default: mdio0-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */
AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */
>;
};
rgmii1_pins_default: rgmii1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
>;
};
emmc_pins_default: emmc-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
>;
};
vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
>;
};
sd_pins_default: sd-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
>;
};
wifi_pins_default: wifi-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
>;
};
wifi_en_pins_default: wifi-en-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
>;
};
wifi_wlirq_pins_default: wifi-wlirq-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
>;
};
spe_pins_default: spe-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
>;
};
mikrobus_i2c_pins_default: mikrobus-i2c-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
>;
};
mikrobus_uart_pins_default: mikrobus-uart-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */
AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */
>;
};
mikrobus_spi_pins_default: mikrobus-spi-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */
AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */
AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */
AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
>;
};
mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
>;
};
console_pins_default: console-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
>;
};
wifi_debug_uart_pins_default: wifi-debug-uart-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
>;
};
usb1_pins_default: usb1-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
>;
};
pmic_irq_pins_default: pmic-irq-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
>;
};
hdmi_gpio_pins_default: hdmi-gpio-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
>;
};
mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
>;
};
dss0_pins_default: dss0-default-pins {
pinctrl-single,pins = <
AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
>;
};
};
&mcu_pmx0 {
i2c_qwiic_pins_default: i2c-qwiic-default-pins {
pinctrl-single,pins = <
AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
>;
};
gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
pinctrl-single,pins = <
AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
>;
};
i2c_csi_pins_default: i2c-csi-default-pins {
pinctrl-single,pins = <
AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
>;
};
wifi_32k_clk: mcu-clk-out-default-pins {
pinctrl-single,pins = <
AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
>;
};
};
&a53_opp_table {
/* Requires VDD_CORE to be at 0.85V */
opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-supported-hw = <0x01 0x0004>;
};
};
&wkup_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c_csi_pins_default>;
clock-frequency = <400000>;
/* Enable with overlay for camera sensor */
};
&mcu_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c_qwiic_pins_default>;
clock-frequency = <100000>;
status = "okay";
};
&usbss0 {
ti,vbus-divider;
status = "okay";
};
&usb0 {
dr_mode = "peripheral";
};
&usbss1 {
ti,vbus-divider;
status = "okay";
};
&usb1 {
dr_mode = "host";
pinctrl-names = "default";
pinctrl-0 = <&usb1_pins_default>;
};
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>,
<&gbe_pmx_obsclk>;
assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
};
&cpsw_port2 {
phy-mode = "rmii";
phy-handle = <&cpsw3g_phy1>;
};
&cpsw3g_mdio {
/* Workaround for errata i2329 - Use mdio bitbang */
status = "disabled";
};
&main_gpio0 {
pinctrl-names = "default";
pinctrl-0 = <&gpio0_pins_default>;
gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */
"USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */
"EEPROM_WP", /* 10 */
"CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */
"CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "", /* 13-17 */
"USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */
"", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */
"", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
"", "", "", "", "", "", "", "", "", "", "", "", /* 43-54 */
"", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
"", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
"", "", "", "", "", "", /* 79-84 */
"BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK", /* 85-86 */
"", "", "", "", ""; /* 87-91 */
};
&main_gpio1 {
pinctrl-names = "default";
pinctrl-0 = <&mikrobus_gpio_pins_default>;
gpio-line-names = "", "", "", "", "", /* 0-4 */
"SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7", /* 5-7 */
"MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9", /* 8-9 */
"MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11", /* 10-11 */
"MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0", /* 12-13 */
"MIKROBUS_GPIO1_14", /* 14 */
"", "", "", "", "VDD_3V3_SD", "", "", /* 15-21 */
"MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23", /* 22-23 */
"MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25", /* 24-25 */
"", "", "", "", "", "", "", "", "", "", "", "", /* 26-37 */
"", "", "", "", "", "", "", "", "", "", /* 38-47 */
"SD_CD", "SD_VOLT_SEL", "", ""; /* 48-51 */
};
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&local_i2c_pins_default>;
clock-frequency = <400000>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
};
rtc: rtc@68 {
compatible = "ti,bq32000";
reg = <0x68>;
interrupt-parent = <&main_gpio0>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
};
tps65219: pmic@30 {
compatible = "ti,tps65219";
reg = <0x30>;
buck1-supply = <&vsys_5v0>;
buck2-supply = <&vsys_5v0>;
buck3-supply = <&vsys_5v0>;
ldo1-supply = <&vdd_3v3>;
ldo2-supply = <&buck2_reg>;
ldo3-supply = <&vdd_3v3>;
ldo4-supply = <&vdd_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_irq_pins_default>;
interrupt-parent = <&gic500>;
interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
system-power-controller;
ti,power-button;
regulators {
buck1_reg: buck1 {
regulator-name = "VDD_CORE";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
};
buck2_reg: buck2 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
buck3_reg: buck3 {
regulator-name = "VDD_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: ldo1 {
/*
* Regulator is left as is unused, vdd_sd
* is controlled via GPIO with bypass config
* as per the NVM configuration
*/
regulator-name = "VDD_SD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-allow-bypass;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ldo2 {
regulator-name = "VDDA_0V85";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: ldo3 {
regulator-name = "VDDA_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: ldo4 {
regulator-name = "VDD_2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&main_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&grove_pins_default>;
clock-frequency = <100000>;
status = "okay";
};
&main_i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_1v8_pins_default>;
clock-frequency = <100000>;
status = "okay";
it66121: bridge-hdmi@4c {
compatible = "ite,it66121";
reg = <0x4c>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_gpio_pins_default>;
vcn33-supply = <&vdd_3v3>;
vcn18-supply = <&buck2_reg>;
vrf12-supply = <&buck3_reg>;
reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
interrupt-parent = <&main_gpio0>;
interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
#sound-dai-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
it66121_in: endpoint {
bus-width = <24>;
remote-endpoint = <&dpi1_out>;
};
};
port@1 {
reg = <1>;
it66121_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
};
&main_i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&mikrobus_i2c_pins_default>;
clock-frequency = <400000>;
status = "okay";
};
&main_spi2 {
pinctrl-names = "default";
pinctrl-0 = <&mikrobus_spi_pins_default>;
status = "okay";
};
&sdhci0 {
pinctrl-names = "default";
pinctrl-0 = <&emmc_pins_default>;
ti,driver-strength-ohm = <50>;
disable-wp;
status = "okay";
};
&sdhci1 {
/* SD/MMC */
pinctrl-names = "default";
pinctrl-0 = <&sd_pins_default>;
vmmc-supply = <&vdd_3v3_sd>;
vqmmc-supply = <&vdd_sd_dv>;
ti,driver-strength-ohm = <50>;
disable-wp;
cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
cd-debounce-delay-ms = <100>;
ti,fails-without-test-cd;
status = "okay";
};
&sdhci2 {
vmmc-supply = <&wlan_en>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
bus-width = <4>;
non-removable;
ti,fails-without-test-cd;
cap-power-off-card;
keep-power-in-suspend;
ti,driver-strength-ohm = <50>;
assigned-clocks = <&k3_clks 157 158>;
assigned-clock-parents = <&k3_clks 157 160>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wlcore: wlcore@2 {
compatible = "ti,wl1807";
reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_wlirq_pins_default>;
interrupt-parent = <&main_gpio0>;
interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
};
};
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&console_pins_default>;
status = "okay";
};
&main_uart1 {
/* Main UART1 is used by TIFS firmware */
status = "reserved";
};
&main_uart5 {
pinctrl-names = "default";
pinctrl-0 = <&mikrobus_uart_pins_default>;
status = "okay";
};
&main_uart6 {
pinctrl-names = "default";
pinctrl-0 = <&wifi_debug_uart_pins_default>;
status = "okay";
};
&dss {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss0_pins_default>;
};
&dss_ports {
/* VP2: DPI Output */
port@1 {
reg = <1>;
dpi1_out: endpoint {
remote-endpoint = <&it66121_in>;
};
};
};
&mcasp1 {
status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcasp_hdmi_pins_default>;
auxclk-fs-ratio = <2177>;
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
Reference in New Issue View Git Blame Copy Permalink