u-boot/include/axp221.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

66 lines
2.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
*
* X-Powers AXP221 Power Management IC driver
*/
/* Page 0 addresses */
#define AXP221_CHIP_ID 0x03
#define AXP221_OUTPUT_CTRL1 0x10
#define AXP221_OUTPUT_CTRL1_DCDC0_EN (1 << 0)
#define AXP221_OUTPUT_CTRL1_DCDC1_EN (1 << 1)
#define AXP221_OUTPUT_CTRL1_DCDC2_EN (1 << 2)
#define AXP221_OUTPUT_CTRL1_DCDC3_EN (1 << 3)
#define AXP221_OUTPUT_CTRL1_DCDC4_EN (1 << 4)
#define AXP221_OUTPUT_CTRL1_DCDC5_EN (1 << 5)
#define AXP221_OUTPUT_CTRL1_ALDO1_EN (1 << 6)
#define AXP221_OUTPUT_CTRL1_ALDO2_EN (1 << 7)
#define AXP221_OUTPUT_CTRL2 0x12
#define AXP221_OUTPUT_CTRL2_ELDO1_EN (1 << 0)
#define AXP221_OUTPUT_CTRL2_ELDO2_EN (1 << 1)
#define AXP221_OUTPUT_CTRL2_ELDO3_EN (1 << 2)
#define AXP221_OUTPUT_CTRL2_DLDO1_EN (1 << 3)
#define AXP221_OUTPUT_CTRL2_DLDO2_EN (1 << 4)
#define AXP221_OUTPUT_CTRL2_DLDO3_EN (1 << 5)
#define AXP221_OUTPUT_CTRL2_DLDO4_EN (1 << 6)
#define AXP221_OUTPUT_CTRL2_DCDC1SW_EN (1 << 7)
#define AXP221_OUTPUT_CTRL3 0x13
#define AXP221_OUTPUT_CTRL3_ALDO3_EN (1 << 7)
#define AXP221_DLDO1_CTRL 0x15
#define AXP221_DLDO2_CTRL 0x16
#define AXP221_DLDO3_CTRL 0x17
#define AXP221_DLDO4_CTRL 0x18
#define AXP221_ELDO1_CTRL 0x19
#define AXP221_ELDO2_CTRL 0x1a
#define AXP221_ELDO3_CTRL 0x1b
#define AXP221_DCDC1_CTRL 0x21
#define AXP221_DCDC2_CTRL 0x22
#define AXP221_DCDC3_CTRL 0x23
#define AXP221_DCDC4_CTRL 0x24
#define AXP221_DCDC5_CTRL 0x25
#define AXP221_ALDO1_CTRL 0x28
#define AXP221_ALDO2_CTRL 0x29
#define AXP221_ALDO3_CTRL 0x2a
#define AXP221_SHUTDOWN 0x32
#define AXP221_SHUTDOWN_POWEROFF (1 << 7)
#define AXP221_PAGE 0xff
/* Page 1 addresses */
#define AXP221_SID 0x20
/* For axp_gpio.c */
#define AXP_POWER_STATUS 0x00
#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5)
#define AXP_VBUS_IPSOUT 0x30
#define AXP_VBUS_IPSOUT_DRIVEBUS (1 << 2)
#define AXP_MISC_CTRL 0x8f
#define AXP_MISC_CTRL_N_VBUSEN_FUNC (1 << 4)
#define AXP_GPIO0_CTRL 0x90
#define AXP_GPIO1_CTRL 0x92
#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */
#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */
#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */
#define AXP_GPIO_STATE 0x94
#define AXP_GPIO_STATE_OFFSET 0