u-boot/drivers/pci/pci_indirect.c
Mario Six e097ce4304 pci: Don't use pci_indirect when DM is active
Declaration of indirect PCI bridges is not compatible with DM: Both
define PCI operations, but in different ways. Hence, don't use indirect
bridges if DM is active.

Signed-off-by: Mario Six <mario.six@gdsys.cc>
Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-08 18:50:23 -04:00

72 lines
2.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Support for indirect PCI bridges.
*
* Copyright (C) 1998 Gabriel Paubert.
*/
#include <common.h>
#if !defined(__I386__) && !defined(CONFIG_DM_PCI)
#include <asm/processor.h>
#include <asm/io.h>
#include <pci.h>
#define cfg_read(val, addr, type, op) *val = op((type)(addr))
#define cfg_write(val, addr, type, op) op((type *)(addr), (val))
#if defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
indirect_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
u32 b, d,f; \
b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \
b = b - hose->first_busno; \
dev = PCI_BDF(b, d, f); \
*(hose->cfg_addr) = dev | (offset & 0xfc) | ((offset & 0xf00) << 16) | 0x80000000; \
sync(); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
return 0; \
}
#else
#define INDIRECT_PCI_OP(rw, size, type, op, mask) \
static int \
indirect_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
u32 b, d,f; \
b = PCI_BUS(dev); d = PCI_DEV(dev); f = PCI_FUNC(dev); \
b = b - hose->first_busno; \
dev = PCI_BDF(b, d, f); \
out_le32(hose->cfg_addr, dev | (offset & 0xfc) | 0x80000000); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
return 0; \
}
#endif
INDIRECT_PCI_OP(read, byte, u8 *, in_8, 3)
INDIRECT_PCI_OP(read, word, u16 *, in_le16, 2)
INDIRECT_PCI_OP(read, dword, u32 *, in_le32, 0)
INDIRECT_PCI_OP(write, byte, u8, out_8, 3)
INDIRECT_PCI_OP(write, word, u16, out_le16, 2)
INDIRECT_PCI_OP(write, dword, u32, out_le32, 0)
void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
{
pci_set_ops(hose,
indirect_read_config_byte,
indirect_read_config_word,
indirect_read_config_dword,
indirect_write_config_byte,
indirect_write_config_word,
indirect_write_config_dword);
hose->cfg_addr = (unsigned int *) cfg_addr;
hose->cfg_data = (unsigned char *) cfg_data;
}
#endif /* !__I386__ */