u-boot/include/mv88e6352.h
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

77 lines
1.5 KiB
C

/*
* (C) Copyright 2012
* Valentin Lontgchamp, Keymile AG, valentin.longchamp@keymile.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MV886352_H
#define __MV886352_H
#include <common.h>
/* PHY registers */
#define PHY(itf) (itf)
#define PHY_CTRL 0x00
#define PHY_100_MBPS 0x2000
#define PHY_1_GBPS 0x0040
#define AUTONEG_EN 0x1000
#define AUTONEG_RST 0x0200
#define FULL_DUPLEX 0x0100
#define PHY_PWR_DOWN 0x0800
#define PHY_STATUS 0x01
#define AN1000FIX 0x0001
#define PHY_SPEC_CTRL 0x10
#define SPEC_PWR_DOWN 0x0004
#define AUTO_MDIX_EN 0x0060
#define PHY_1000_CTRL 0x9
#define NO_ADV 0x0000
#define ADV_1000_FDPX 0x0200
#define ADV_1000_HDPX 0x0100
#define PHY_PAGE 0x16
#define AN1000FIX_PAGE 0x00fc
/* PORT or MAC registers */
#define PORT(itf) (itf+0x10)
#define PORT_STATUS 0x00
#define NO_PHY_DETECT 0x0000
#define PORT_PHY 0x01
#define RX_RGMII_TIM 0x8000
#define TX_RGMII_TIM 0x4000
#define FLOW_CTRL_EN 0x0080
#define FLOW_CTRL_FOR 0x0040
#define LINK_VAL 0x0020
#define LINK_FOR 0x0010
#define FULL_DPX 0x0008
#define FULL_DPX_FOR 0x0004
#define NO_SPEED_FOR 0x0003
#define SPEED_1000_FOR 0x0002
#define SPEED_100_FOR 0x0001
#define SPEED_10_FOR 0x0000
#define PORT_CTRL 0x04
#define FORWARDING 0x0003
#define EGRS_FLD_ALL 0x000c
#define PORT_DIS 0x0000
struct mv88e_sw_reg {
u8 port;
u8 reg;
u16 value;
};
int mv88e_sw_reset(const char *devname, u8 phy_addr);
int mv88e_sw_program(const char *devname, u8 phy_addr,
struct mv88e_sw_reg *regs, int regs_nb);
#endif