u-boot/configs/CMPC885_defconfig
Christophe Leroy 57eb454392 board: cssi: add support for reading temperature
All CSSI boards have an LM74 chip as temperature sensor.

Enable it.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
2024-04-18 15:47:46 +02:00

117 lines
3.0 KiB
Plaintext

CONFIG_PPC=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="cmpc885"
CONFIG_SYS_MONITOR_LEN=327680
CONFIG_SYS_CLK_FREQ=132000000
CONFIG_ENV_ADDR=0x40004000
CONFIG_MPC8xx=y
# CONFIG_PCI is not set
CONFIG_TARGET_CMPC885=y
CONFIG_MPC885=y
CONFIG_SMC_UCODE_PATCH=y
CONFIG_SMC2_RPBASE=0x1fc0
CONFIG_CMD_IMMAP=y
CONFIG_SYS_SIUMCR=0x00620000
CONFIG_SYS_TBSCR=0x00C3
CONFIG_SYS_PISCR=0x0000
CONFIG_SYS_PLPRCR_BOOL=y
CONFIG_SYS_PLPRCR=0x374d4000
CONFIG_SYS_SCCR=0x00420000
CONFIG_SYS_SCCR_MASK=0x00000000
CONFIG_SYS_DER=0x2002000F
CONFIG_FIT=y
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_BOOTDELAY=5
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_FLUSH_STDIN=y
CONFIG_AUTOBOOT_PROMPT="\nEnter password - autoboot in %d sec...\n"
CONFIG_AUTOBOOT_ENCRYPTION=y
CONFIG_AUTOBOOT_STOP_STR_ENABLE=y
CONFIG_AUTOBOOT_STOP_STR_SHA256="4813494d137e1631bba301d5acab6e7bb7aa74ce1185d456565ef51d737677b2"
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run flashboot"
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="S3K> "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_GO is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MTD=y
CONFIG_CMD_NAND=y
CONFIG_CMD_TEMPERATURE=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.168.0.3"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.168.0.1"
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0x40000801
CONFIG_SYS_OR0_PRELIM=0xFFC00924
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0x00000081
CONFIG_SYS_OR1_PRELIM=0xFC000E00
CONFIG_SYS_BR2_PRELIM_BOOL=y
CONFIG_SYS_BR2_PRELIM=0xC0000401
CONFIG_SYS_OR2_PRELIM=0xFFFF8142
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xE0000801
CONFIG_SYS_OR3_PRELIM=0xFF00010A
CONFIG_SYS_BR4_PRELIM_BOOL=y
CONFIG_SYS_BR4_PRELIM=0xD0000801
CONFIG_SYS_OR4_PRELIM=0xFC000D08
CONFIG_SYS_BR5_PRELIM_BOOL=y
CONFIG_SYS_BR5_PRELIM=0xC8000801
CONFIG_SYS_OR5_PRELIM=0xFFFF8D10
CONFIG_SYS_BR6_PRELIM_BOOL=y
CONFIG_SYS_BR6_PRELIM=0x80000801
CONFIG_SYS_OR6_PRELIM=0xFFFF8908
CONFIG_SYS_BR7_PRELIM_BOOL=y
CONFIG_SYS_BR7_PRELIM=0xF0000001
CONFIG_SYS_OR7_PRELIM=0xFFFF810A
CONFIG_MPC8XX_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_MAX_FLASH_SECT=71
CONFIG_MTD_RAW_NAND=y
CONFIG_RMII=y
CONFIG_MPC8XX_FEC=y
CONFIG_FEC1_PHY=1
CONFIG_FEC2_PHY=2
CONFIG_DM_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MPC8XX_SPI=y
CONFIG_DM_THERMAL=y
CONFIG_TI_LM74_THERMAL=y
CONFIG_WDT=y
CONFIG_WDT_MPC8xxx_BME=y
# CONFIG_REGEX is not set
CONFIG_LZMA=y