db04ff42c7
The help for CONFIG_MTD explains that it needs to be enabled for various things like NAND, etc to be available. It however then doesn't enforce this dependency and so if you have none of these systems present you still need to disable a number of options. Fix this by making places that select/imply one type of flash, but did not do the same, also do this for "MTD". Make boards which hadn't been enabling MTD already but need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it wasn't previously enabled but was now being implied. Signed-off-by: Tom Rini <trini@konsulko.com>
109 lines
2.9 KiB
Plaintext
109 lines
2.9 KiB
Plaintext
CONFIG_PPC=y
|
|
CONFIG_SYS_IMMR=0xE0000000
|
|
CONFIG_TEXT_BASE=0xFFF80000
|
|
CONFIG_SYS_MALLOC_LEN=0x100000
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_ENV_SECT_SIZE=0x20000
|
|
CONFIG_DEFAULT_DEVICE_TREE="mpc8548cds_36b"
|
|
CONFIG_SYS_MONITOR_LEN=524288
|
|
CONFIG_ENV_ADDR=0xFFF60000
|
|
CONFIG_MPC85xx=y
|
|
CONFIG_SYS_INIT_RAM_LOCK=y
|
|
CONFIG_SYS_SRIO=y
|
|
CONFIG_SRIO1=y
|
|
# CONFIG_CMD_ERRATA is not set
|
|
CONFIG_TARGET_MPC8548CDS=y
|
|
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
|
|
CONFIG_L2_CACHE=y
|
|
CONFIG_ENABLE_36BIT_PHYS=y
|
|
CONFIG_USE_UBOOTPATH=y
|
|
CONFIG_UBOOTPATH="8548cds/u-boot.bin"
|
|
CONFIG_PCIE1=y
|
|
CONFIG_PHYS_64BIT=y
|
|
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
|
|
CONFIG_BOOTDELAY=10
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
|
CONFIG_USE_BOOTCOMMAND=y
|
|
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
|
|
CONFIG_SYS_PBSIZE=276
|
|
# CONFIG_MISC_INIT_R is not set
|
|
CONFIG_ID_EEPROM=y
|
|
CONFIG_SYS_I2C_EEPROM_CCID=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_IMLS=y
|
|
CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_LOADS_ECHO=y
|
|
CONFIG_SYS_LOADS_BAUD_CHANGE=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_BOOTP_BOOTFILESIZE=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
# CONFIG_CMD_HASH is not set
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_USE_BOOTFILE=y
|
|
CONFIG_BOOTFILE="8548cds/uImage.uboot"
|
|
CONFIG_USE_ETHPRIME=y
|
|
CONFIG_ETHPRIME="eTSEC0"
|
|
CONFIG_USE_HOSTNAME=y
|
|
CONFIG_USE_GATEWAYIP=y
|
|
CONFIG_GATEWAYIP="192.168.1.1"
|
|
CONFIG_USE_IPADDR=y
|
|
CONFIG_IPADDR="192.168.1.253"
|
|
CONFIG_USE_NETMASK=y
|
|
CONFIG_NETMASK="255.255.255.0"
|
|
CONFIG_USE_ROOTPATH=y
|
|
CONFIG_ROOTPATH="/nfsroot"
|
|
CONFIG_USE_SERVERIP=y
|
|
CONFIG_SERVERIP="192.168.1.1"
|
|
CONFIG_SPD_EEPROM=y
|
|
CONFIG_CHIP_SELECTS_PER_CTRL=2
|
|
CONFIG_DDR_ECC=y
|
|
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
|
|
CONFIG_SYS_BR0_PRELIM_BOOL=y
|
|
CONFIG_SYS_BR0_PRELIM=0xFF807001
|
|
CONFIG_SYS_OR0_PRELIM=0xFF806E65
|
|
CONFIG_SYS_BR1_PRELIM_BOOL=y
|
|
CONFIG_SYS_BR1_PRELIM=0xFF007001
|
|
CONFIG_SYS_OR1_PRELIM=0xFF806E65
|
|
CONFIG_SYS_BR2_PRELIM_BOOL=y
|
|
CONFIG_SYS_BR2_PRELIM=0xF0007861
|
|
CONFIG_SYS_OR2_PRELIM=0xFC006901
|
|
CONFIG_SYS_BR3_PRELIM_BOOL=y
|
|
CONFIG_SYS_BR3_PRELIM=0xF8006801
|
|
CONFIG_SYS_OR3_PRELIM=0xFFF00FF7
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
|
|
CONFIG_SYS_I2C_FSL=y
|
|
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
|
|
# CONFIG_MMC is not set
|
|
CONFIG_MTD=y
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
CONFIG_FLASH_SHOW_PROGRESS=0
|
|
CONFIG_SYS_FLASH_EMPTY_INFO=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_SYS_MAX_FLASH_SECT=128
|
|
CONFIG_SYS_MAX_FLASH_BANKS=2
|
|
CONFIG_PHY_ATHEROS=y
|
|
CONFIG_PHY_BROADCOM=y
|
|
CONFIG_PHY_DAVICOM=y
|
|
CONFIG_PHY_LXT=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_PHY_NATSEMI=y
|
|
CONFIG_PHY_REALTEK=y
|
|
CONFIG_PHY_SMSC=y
|
|
CONFIG_PHY_VITESSE=y
|
|
CONFIG_PHY_GIGE=y
|
|
CONFIG_E1000=y
|
|
CONFIG_MII=y
|
|
CONFIG_TSEC_ENET=y
|
|
CONFIG_DM_PCI_COMPAT=y
|
|
CONFIG_PCIE_FSL=y
|
|
CONFIG_CONS_INDEX=2
|
|
CONFIG_SYS_NS16550_SERIAL=y
|
|
CONFIG_ADDR_MAP=y
|