u-boot/configs/stm32mp25_defconfig
Patrick Delaunay c20e0fc7d6 configs: stm32mp25: add support of fuse command
Add support of the command fuse with CONFIG_CMD_FUSE to allow access
on OTP with command line.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2024-01-19 14:19:43 +01:00

54 lines
1.3 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_STM32MP=y
CONFIG_SYS_MALLOC_F_LEN=0x400000
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x90000000
CONFIG_DEFAULT_DEVICE_TREE="stm32mp257f-ev1"
CONFIG_STM32MP25X=y
CONFIG_DDR_CACHEABLE_SIZE=0x10000000
CONFIG_TARGET_ST_STM32MP25X=y
CONFIG_SYS_LOAD_ADDR=0x84000000
CONFIG_SYS_MEMTEST_START=0x84000000
CONFIG_SYS_MEMTEST_END=0x88000000
CONFIG_FIT=y
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_BOOTDELAY=1
CONFIG_LAST_STAGE_INIT=y
CONFIG_SYS_PROMPT="STM32MP> "
# CONFIG_CMD_BDI is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_ADTIMG=y
# CONFIG_CMD_ELF is not set
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_FUSE=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADB is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_RNG=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_LOG=y
CONFIG_OF_LIVE=y
# CONFIG_NET is not set
CONFIG_GPIO_HOG=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
# CONFIG_MMC is not set
CONFIG_PINCONF=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_RAM=y
# CONFIG_STM32MP1_DDR is not set
CONFIG_DM_RNG=y
CONFIG_SERIAL_RX_BUFFER=y
# CONFIG_OPTEE_TA_AVB is not set
CONFIG_WDT=y
CONFIG_WDT_STM32MP=y
CONFIG_WDT_ARM_SMC=y
CONFIG_ERRNO_STR=y
# CONFIG_LMB_USE_MAX_REGIONS is not set
CONFIG_LMB_MEMORY_REGIONS=2
CONFIG_LMB_RESERVED_REGIONS=32