588399c2d5
The Sielaff i.MX6 Solo board is a control and HMI board for vending machines. Add support for this board. The devicetree files are taken from pending changes in the Linux kernel that are available from linux-next and will likely be part of Linux v6.9. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
121 lines
2.8 KiB
Plaintext
121 lines
2.8 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_MX6=y
|
|
CONFIG_TEXT_BASE=0x17800000
|
|
CONFIG_SYS_MALLOC_LEN=0x4000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x4000
|
|
CONFIG_SPL_GPIO=y
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_ENV_SOURCE_FILE="imx6dl-sielaff"
|
|
CONFIG_SF_DEFAULT_SPEED=20000000
|
|
CONFIG_ENV_SIZE=0x10000
|
|
CONFIG_ENV_OFFSET=0xF0000
|
|
CONFIG_ENV_SECT_SIZE=0x10000
|
|
CONFIG_MX6S=y
|
|
CONFIG_TARGET_MX6S_SIELAFF=y
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="imx6dl-sielaff"
|
|
CONFIG_SPL_TEXT_BASE=0x00908000
|
|
CONFIG_SPL_MMC=y
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL=y
|
|
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
|
CONFIG_SPL_SPI=y
|
|
CONFIG_LTO=y
|
|
CONFIG_FIT=y
|
|
CONFIG_SPL_FIT_PRINT=y
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
CONFIG_SUPPORT_RAW_INITRD=y
|
|
CONFIG_SPI_BOOT=y
|
|
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8A
|
|
CONFIG_SPL_SPI_LOAD=y
|
|
CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_SPL=y
|
|
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_PART=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_SDP=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
CONFIG_CMD_WDT=y
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=nand0"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand0:-@0x0(rootfs)"
|
|
CONFIG_CMD_UBI=y
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
CONFIG_EFI_PARTITION=y
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
|
CONFIG_BOUNCE_BUFFER=y
|
|
CONFIG_USB_FUNCTION_FASTBOOT=y
|
|
CONFIG_FASTBOOT_BUF_ADDR=0x12000000
|
|
CONFIG_FASTBOOT_BUF_SIZE=0x10000000
|
|
CONFIG_FASTBOOT_FLASH=y
|
|
CONFIG_FASTBOOT_FLASH_MMC_DEV=2
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_SYS_I2C_MXC=y
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|
|
CONFIG_FSL_USDHC=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_NAND_MXS=y
|
|
CONFIG_NAND_MXS_DT=y
|
|
CONFIG_SYS_NAND_ONFI_DETECTION=y
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SF_DEFAULT_BUS=1
|
|
CONFIG_SPI_FLASH_EON=y
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
CONFIG_SPI_FLASH_MTD=y
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_MICREL=y
|
|
CONFIG_PHY_MICREL_KSZ8XXX=y
|
|
CONFIG_DM_MDIO=y
|
|
CONFIG_FEC_MXC=y
|
|
CONFIG_MII=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_IMX6=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_CONS_INDEX=2
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_MXC_UART=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_MXC_SPI=y
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_SYSRESET_WATCHDOG=y
|
|
CONFIG_IMX_THERMAL=y
|
|
CONFIG_USB=y
|
|
CONFIG_SPL_USB_HOST=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_SPL_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="FSL"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
|
|
CONFIG_CI_UDC=y
|
|
CONFIG_SPL_USB_SDP_SUPPORT=y
|
|
CONFIG_IMX_WATCHDOG=y
|