u-boot/configs/khadas-edge-rk3399_defconfig
Jonas Karlman 5e7cd8a119 rockchip: Use common bss and stack addresses on RK3399
With the stack and text base used by U-Boot SPL and proper on RK3399
there is a high likelihood of overlapping when U-Boot proper + FDT nears
or exceeded 1 MiB in size.

Currently the following memory layout is typically used on RK3399:
[    0, 256K) - SPL binary
[ 256K,   2M) - TF-A / reserved
[   2M,   +X) - U-Boot proper binary (TEXT_BASE)
[   -X,   3M) - U-Boot proper pre-reloc stack (CUSTOM_SYS_INIT_SP_ADDR)
[ -16K,   3M)   - pre-reloc malloc heap (SYS_MALLOC_F_LEN)
[   -X,   4M) - SPL pre-reloc stack (SPL_STACK)
[ -16K,   4M)   - pre-reloc malloc heap (SPL_SYS_MALLOC_F_LEN)
[   4M,  +8K) - SPL bss (SPL_BSS_START_ADDR, SPL_BSS_MAX_SIZE)
[   -X,  64M) - SPL reloc stack (SPL_STACK_R_ADDR)
[  63M,  64M)   - reloc malloc heap (SPL_STACK_R_MALLOC_SIMPLE_LEN)

SPL can safely load U-Boot proper + FDT to [2M, 4M-16K) with this layout.
However, the stack at [-X, 3M) used during U-Boot proper pre-reloc is
restricting the safe size of U-Boot proper + FDT to be less than 1 MiB.

Migrate to use common bss, stack and malloc heap size and addresses to
fix this restriction and allow for a larger U-Boot proper image size.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-03-14 15:27:29 +08:00

67 lines
1.7 KiB
Plaintext

CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_DEFAULT_DEVICE_TREE="rk3399-khadas-edge"
CONFIG_ROCKCHIP_RK3399=y
CONFIG_TARGET_EVB_RK3399=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEBUG_UART=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge.dtb"
CONFIG_SYS_PBSIZE=1048
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x2e000
CONFIG_SPL_PAD_TO=0x7f8000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_TPL=y
CONFIG_SYS_PROMPT="kedge# "
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_PHY_REALTEK=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM_ROCKCHIP_LPDDR4=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550_MEM32=y
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y