db04ff42c7
The help for CONFIG_MTD explains that it needs to be enabled for various things like NAND, etc to be available. It however then doesn't enforce this dependency and so if you have none of these systems present you still need to disable a number of options. Fix this by making places that select/imply one type of flash, but did not do the same, also do this for "MTD". Make boards which hadn't been enabling MTD already but need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it wasn't previously enabled but was now being implied. Signed-off-by: Tom Rini <trini@konsulko.com>
98 lines
2.2 KiB
Plaintext
98 lines
2.2 KiB
Plaintext
CONFIG_MIPS=y
|
|
CONFIG_TEXT_BASE=0xffffffff80000000
|
|
CONFIG_SYS_MALLOC_LEN=0x1000000
|
|
CONFIG_SYS_MALLOC_F_LEN=0x4000
|
|
CONFIG_NR_DRAM_BANKS=2
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_ENV_SECT_SIZE=0x2000
|
|
CONFIG_DEBUG_UART_BASE=0x8001180000000800
|
|
CONFIG_DEBUG_UART_CLOCK=1200000000
|
|
CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
|
|
CONFIG_ENV_ADDR=0x800000001FBFE000
|
|
CONFIG_ARCH_OCTEON=y
|
|
# CONFIG_MIPS_CACHE_SETUP is not set
|
|
# CONFIG_MIPS_CACHE_DISABLE is not set
|
|
CONFIG_MIPS_RELOCATION_TABLE_SIZE=0xc000
|
|
CONFIG_PCI=y
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_OF_BOARD_FIXUP=y
|
|
CONFIG_SYS_BOOTM_LEN=0x4000000
|
|
CONFIG_SYS_CBSIZE=256
|
|
CONFIG_SYS_PBSIZE=276
|
|
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
|
CONFIG_BOARD_LATE_INIT=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MTD=y
|
|
CONFIG_CMD_PART=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_WDT=y
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_RTC=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_AMIGA_PARTITION=y
|
|
CONFIG_EFI_PARTITION=y
|
|
CONFIG_PARTITION_TYPE_GUID=y
|
|
CONFIG_ENV_IS_IN_FLASH=y
|
|
CONFIG_TFTP_TSIZE=y
|
|
CONFIG_CLK=y
|
|
# CONFIG_INPUT is not set
|
|
CONFIG_MISC=y
|
|
CONFIG_MMC=y
|
|
CONFIG_MMC_OCTEONTX=y
|
|
CONFIG_DM_MTD=y
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_SHOW_PROGRESS=0
|
|
CONFIG_CFI_FLASH=y
|
|
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
|
CONFIG_SYS_FLASH_EMPTY_INFO=y
|
|
CONFIG_FLASH_CFI_MTD=y
|
|
CONFIG_SYS_FLASH_PROTECTION=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_SYS_MAX_FLASH_SECT=256
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SPI_FLASH_ATMEL=y
|
|
CONFIG_SPI_FLASH_SPANSION=y
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_MARVELL=y
|
|
CONFIG_DM_MDIO=y
|
|
CONFIG_DM_ETH_PHY=y
|
|
CONFIG_E1000=y
|
|
CONFIG_NET_OCTEON=y
|
|
CONFIG_PCIE_OCTEON=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_RAM=y
|
|
CONFIG_RAM_OCTEON=y
|
|
CONFIG_RAM_OCTEON_DDR4=y
|
|
CONFIG_DM_RTC=y
|
|
CONFIG_RTC_DS1307=y
|
|
CONFIG_DEBUG_UART_SHIFT=3
|
|
CONFIG_DEBUG_UART_ANNOUNCE=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_SPI=y
|
|
CONFIG_OCTEON_SPI=y
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_SYSRESET_OCTEON=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_STORAGE=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_ASIX88179=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_RTL8152=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_WDT=y
|
|
CONFIG_HEXDUMP=y
|