u-boot/drivers/gpio/bcm2835_gpio.c
Simon Glass 8a8d24bdf1 dm: treewide: Rename ..._platdata variables to just ..._plat
Try to maintain some consistency between these variables by using _plat as
a suffix for them.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 16:51:09 -07:00

143 lines
3.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Vikram Narayananan
* <vikram186@gmail.com>
*/
#include <common.h>
#include <dm.h>
#include <dm/pinctrl.h>
#include <errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <fdtdec.h>
struct bcm2835_gpios {
struct bcm2835_gpio_regs *reg;
struct udevice *pinctrl;
};
static int bcm2835_gpio_direction_input(struct udevice *dev, unsigned gpio)
{
struct bcm2835_gpios *gpios = dev_get_priv(dev);
unsigned val;
val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]);
val &= ~(BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(gpio));
val |= (BCM2835_GPIO_INPUT << BCM2835_GPIO_FSEL_SHIFT(gpio));
writel(val, &gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]);
return 0;
}
static int bcm2835_gpio_direction_output(struct udevice *dev, unsigned int gpio,
int value)
{
struct bcm2835_gpios *gpios = dev_get_priv(dev);
unsigned val;
gpio_set_value(gpio, value);
val = readl(&gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]);
val &= ~(BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(gpio));
val |= (BCM2835_GPIO_OUTPUT << BCM2835_GPIO_FSEL_SHIFT(gpio));
writel(val, &gpios->reg->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]);
return 0;
}
static int bcm2835_get_value(const struct bcm2835_gpios *gpios, unsigned gpio)
{
unsigned val;
val = readl(&gpios->reg->gplev[BCM2835_GPIO_COMMON_BANK(gpio)]);
return (val >> BCM2835_GPIO_COMMON_SHIFT(gpio)) & 0x1;
}
static int bcm2835_gpio_get_value(struct udevice *dev, unsigned gpio)
{
const struct bcm2835_gpios *gpios = dev_get_priv(dev);
return bcm2835_get_value(gpios, gpio);
}
static int bcm2835_gpio_set_value(struct udevice *dev, unsigned gpio,
int value)
{
struct bcm2835_gpios *gpios = dev_get_priv(dev);
u32 *output_reg = value ? gpios->reg->gpset : gpios->reg->gpclr;
writel(1 << BCM2835_GPIO_COMMON_SHIFT(gpio),
&output_reg[BCM2835_GPIO_COMMON_BANK(gpio)]);
return 0;
}
static int bcm2835_gpio_get_function(struct udevice *dev, unsigned offset)
{
struct bcm2835_gpios *priv = dev_get_priv(dev);
int funcid;
funcid = pinctrl_get_gpio_mux(priv->pinctrl, 0, offset);
switch (funcid) {
case BCM2835_GPIO_OUTPUT:
return GPIOF_OUTPUT;
case BCM2835_GPIO_INPUT:
return GPIOF_INPUT;
default:
return GPIOF_FUNC;
}
}
static const struct dm_gpio_ops gpio_bcm2835_ops = {
.direction_input = bcm2835_gpio_direction_input,
.direction_output = bcm2835_gpio_direction_output,
.get_value = bcm2835_gpio_get_value,
.set_value = bcm2835_gpio_set_value,
.get_function = bcm2835_gpio_get_function,
};
static int bcm2835_gpio_probe(struct udevice *dev)
{
struct bcm2835_gpios *gpios = dev_get_priv(dev);
struct bcm2835_gpio_plat *plat = dev_get_plat(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
uc_priv->bank_name = "GPIO";
uc_priv->gpio_count = BCM2835_GPIO_COUNT;
gpios->reg = (struct bcm2835_gpio_regs *)plat->base;
/* We know we're spawned by the pinctrl driver */
gpios->pinctrl = dev->parent;
return 0;
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
static int bcm2835_gpio_of_to_plat(struct udevice *dev)
{
struct bcm2835_gpio_plat *plat = dev_get_plat(dev);
fdt_addr_t addr;
addr = dev_read_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = addr;
return 0;
}
#endif
U_BOOT_DRIVER(gpio_bcm2835) = {
.name = "gpio_bcm2835",
.id = UCLASS_GPIO,
.of_to_plat = of_match_ptr(bcm2835_gpio_of_to_plat),
.plat_auto = sizeof(struct bcm2835_gpio_plat),
.ops = &gpio_bcm2835_ops,
.probe = bcm2835_gpio_probe,
.flags = DM_FLAG_PRE_RELOC,
.priv_auto = sizeof(struct bcm2835_gpios),
};