u-boot/include/fsl_pmic.h
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

121 lines
2.2 KiB
C

/*
* (C) Copyright 2010
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __FSL_PMIC_H__
#define __FSL_PMIC_H__
/*
* The registers of different PMIC has the same meaning
* but the bit positions of the fields can differ or
* some fields has a meaning only on some devices.
* You have to check with the internal SPI bitmap
* (see Freescale Documentation) to set the registers
* for the device you are using
*/
enum {
REG_INT_STATUS0 = 0,
REG_INT_MASK0,
REG_INT_SENSE0,
REG_INT_STATUS1,
REG_INT_MASK1,
REG_INT_SENSE1,
REG_PU_MODE_S,
REG_IDENTIFICATION,
REG_UNUSED0,
REG_ACC0,
REG_ACC1, /*10 */
REG_UNUSED1,
REG_UNUSED2,
REG_POWER_CTL0,
REG_POWER_CTL1,
REG_POWER_CTL2,
REG_REGEN_ASSIGN,
REG_UNUSED3,
REG_MEM_A,
REG_MEM_B,
REG_RTC_TIME, /*20 */
REG_RTC_ALARM,
REG_RTC_DAY,
REG_RTC_DAY_ALARM,
REG_SW_0,
REG_SW_1,
REG_SW_2,
REG_SW_3,
REG_SW_4,
REG_SW_5,
REG_SETTING_0, /*30 */
REG_SETTING_1,
REG_MODE_0,
REG_MODE_1,
REG_POWER_MISC,
REG_UNUSED4,
REG_UNUSED5,
REG_UNUSED6,
REG_UNUSED7,
REG_UNUSED8,
REG_UNUSED9, /*40 */
REG_UNUSED10,
REG_UNUSED11,
REG_ADC0,
REG_ADC1,
REG_ADC2,
REG_ADC3,
REG_ADC4,
REG_CHARGE,
REG_USB0,
REG_USB1, /*50 */
REG_LED_CTL0,
REG_LED_CTL1,
REG_LED_CTL2,
REG_LED_CTL3,
REG_UNUSED12,
REG_UNUSED13,
REG_TRIM0,
REG_TRIM1,
REG_TEST0,
REG_TEST1, /*60 */
REG_TEST2,
REG_TEST3,
REG_TEST4,
PMIC_NUM_OF_REGS,
};
/* REG_POWER_MISC */
#define GPO1EN (1 << 6)
#define GPO1STBY (1 << 7)
#define GPO2EN (1 << 8)
#define GPO2STBY (1 << 9)
#define GPO3EN (1 << 10)
#define GPO3STBY (1 << 11)
#define GPO4EN (1 << 12)
#define GPO4STBY (1 << 13)
#define PWGT1SPIEN (1 << 15)
#define PWGT2SPIEN (1 << 16)
#define PWUP (1 << 21)
/* Power Control 0 */
#define COINCHEN (1 << 23)
#define BATTDETEN (1 << 19)
/* Interrupt status 1 */
#define RTCRSTI (1 << 7)
/* MC34708 Definitions */
#define SWx_VOLT_MASK_MC34708 0x3F
#define SWx_1_250V_MC34708 0x30
#define SWx_1_300V_MC34708 0x34
#define TIMER_MASK_MC34708 0x300
#define TIMER_4S_MC34708 0x100
#define VUSBSEL_MC34708 (1 << 2)
#define VUSBEN_MC34708 (1 << 3)
#define SWBST_CTRL 31
#define SWBST_AUTO 0x8
#endif