/* * Copyright 2017-2020 NXP * All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ /*********************************************************************************************************************** * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. **********************************************************************************************************************/ /* clang-format off */ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* !!GlobalInfo product: Pins v7.0 processor: LPC55S69 package_id: LPC55S69JBD100 mcu_data: ksdk2_0 processor_version: 6.0.0 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* clang-format on */ #include "fsl_common.h" #include "fsl_iocon.h" #include "pin_mux.h" /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitBootPins * Description : Calls initialization functions. * * END ****************************************************************************************************************/ void BOARD_InitBootPins(void) { BOARD_InitPins(); } /* clang-format off */ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitPins: - options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} - pin_list: - {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29, mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} - {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* clang-format on */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitPins * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ /* Function assigned for the Cortex-M33 (Core #0) */ void BOARD_InitPins(void) { /* Enables the clock for the I/O controller.: Enable Clock. */ CLOCK_EnableClock(kCLOCK_Iocon); const uint32_t port0_pin29_config = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */ IOCON_PIO_FUNC1 | /* No addition pin function */ IOCON_PIO_MODE_INACT | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_SLEW_STANDARD | /* Input function is not inverted */ IOCON_PIO_INV_DI | /* Enables digital function */ IOCON_PIO_DIGITAL_EN | /* Open drain is disabled */ IOCON_PIO_OPENDRAIN_DI); /* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */ IOCON_PinMuxSet(IOCON, 0U, 29U, port0_pin29_config); const uint32_t port0_pin30_config = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */ IOCON_PIO_FUNC1 | /* No addition pin function */ IOCON_PIO_MODE_INACT | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_SLEW_STANDARD | /* Input function is not inverted */ IOCON_PIO_INV_DI | /* Enables digital function */ IOCON_PIO_DIGITAL_EN | /* Open drain is disabled */ IOCON_PIO_OPENDRAIN_DI); /* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */ IOCON_PinMuxSet(IOCON, 0U, 30U, port0_pin30_config); } /* clang-format off */ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* SPI8_InitPins: - options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} - pin_list: - {pin_num: '61', peripheral: FLEXCOMM8, signal: HS_SPI_SCK, pin_signal: PIO1_2/CTIMER0_MAT3/SCT_GPI6/HS_SPI_SCK/USB1_PORTPWRN/PLU_OUT5, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} - {pin_num: '60', peripheral: FLEXCOMM8, signal: HS_SPI_MOSI, pin_signal: PIO0_26/FC2_RXD_SDA_MOSI_DATA/CLKOUT/CT_INP14/SCT0_OUT5/USB0_IDVALUE/FC0_SCK/HS_SPI_MOSI/SECURE_GPIO0_26, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} - {pin_num: '62', peripheral: FLEXCOMM8, signal: HS_SPI_MISO, pin_signal: PIO1_3/SCT0_OUT4/HS_SPI_MISO/USB0_PORTPWRN/PLU_OUT6, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} - {pin_num: '59', peripheral: FLEXCOMM8, signal: HS_SPI_SSEL1, pin_signal: PIO1_1/FC3_RXD_SDA_MOSI_DATA/CT_INP3/SCT_GPI5/HS_SPI_SSEL1/USB1_OVERCURRENTN/PLU_OUT4, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: disabled} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* clang-format on */ /* FUNCTION ************************************************************************************************************ * * Function Name : SPI8_InitPins * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ /* Function assigned for the Cortex-M33 (Core #0) */ void SPI8_InitPins(void) { /* Enables the clock for the I/O controller.: Enable Clock. */ CLOCK_EnableClock(kCLOCK_Iocon); const uint32_t port0_pin26_config = (/* Pin is configured as HS_SPI_MOSI */ IOCON_PIO_FUNC9 | /* Selects pull-up function */ IOCON_PIO_MODE_PULLUP | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_SLEW_STANDARD | /* Input function is not inverted */ IOCON_PIO_INV_DI | /* Enables digital function */ IOCON_PIO_DIGITAL_EN | /* Open drain is disabled */ IOCON_PIO_OPENDRAIN_DI); /* PORT0 PIN26 (coords: 60) is configured as HS_SPI_MOSI */ IOCON_PinMuxSet(IOCON, 0U, 26U, port0_pin26_config); const uint32_t port1_pin1_config = (/* Pin is configured as HS_SPI_SSEL1 */ IOCON_PIO_FUNC5 | /* Selects pull-up function */ IOCON_PIO_MODE_PULLUP | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_SLEW_STANDARD | /* Input function is not inverted */ IOCON_PIO_INV_DI | /* Enables digital function */ IOCON_PIO_DIGITAL_EN | /* Open drain is disabled */ IOCON_PIO_OPENDRAIN_DI); /* PORT1 PIN1 (coords: 59) is configured as HS_SPI_SSEL1 */ IOCON_PinMuxSet(IOCON, 1U, 1U, port1_pin1_config); const uint32_t port1_pin2_config = (/* Pin is configured as HS_SPI_SCK */ IOCON_PIO_FUNC6 | /* Selects pull-up function */ IOCON_PIO_MODE_PULLUP | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_SLEW_STANDARD | /* Input function is not inverted */ IOCON_PIO_INV_DI | /* Enables digital function */ IOCON_PIO_DIGITAL_EN | /* Open drain is disabled */ IOCON_PIO_OPENDRAIN_DI); /* PORT1 PIN2 (coords: 61) is configured as HS_SPI_SCK */ IOCON_PinMuxSet(IOCON, 1U, 2U, port1_pin2_config); const uint32_t port1_pin3_config = (/* Pin is configured as HS_SPI_MISO */ IOCON_PIO_FUNC6 | /* Selects pull-up function */ IOCON_PIO_MODE_PULLUP | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_SLEW_STANDARD | /* Input function is not inverted */ IOCON_PIO_INV_DI | /* Enables digital function */ IOCON_PIO_DIGITAL_EN | /* Open drain is disabled */ IOCON_PIO_OPENDRAIN_DI); /* PORT1 PIN3 (coords: 62) is configured as HS_SPI_MISO */ IOCON_PinMuxSet(IOCON, 1U, 3U, port1_pin3_config); } /* clang-format off */ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* SPI8_DeinitPins: - options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} - pin_list: [] * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* clang-format on */ /* FUNCTION ************************************************************************************************************ * * Function Name : SPI8_DeinitPins * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ /* Function assigned for the Cortex-M33 (Core #0) */ void SPI8_DeinitPins(void) { } /* clang-format off */ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* I2C4_InitPins: - options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} - pin_list: - {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: enabled} - {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp, slew_rate: standard, invert: disabled, open_drain: enabled} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* clang-format on */ /* FUNCTION ************************************************************************************************************ * * Function Name : I2C4_InitPins * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ /* Function assigned for the Cortex-M33 (Core #0) */ void I2C4_InitPins(void) { /* Enables the clock for the I/O controller.: Enable Clock. */ CLOCK_EnableClock(kCLOCK_Iocon); const uint32_t port1_pin20_config = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */ IOCON_PIO_FUNC5 | /* Selects pull-up function */ IOCON_PIO_MODE_PULLUP | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_SLEW_STANDARD | /* Input function is not inverted */ IOCON_PIO_INV_DI | /* Enables digital function */ IOCON_PIO_DIGITAL_EN | /* Open drain is enabled */ IOCON_PIO_OPENDRAIN_EN); /* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */ IOCON_PinMuxSet(IOCON, 1U, 20U, port1_pin20_config); const uint32_t port1_pin21_config = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */ IOCON_PIO_FUNC5 | /* Selects pull-up function */ IOCON_PIO_MODE_PULLUP | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_SLEW_STANDARD | /* Input function is not inverted */ IOCON_PIO_INV_DI | /* Enables digital function */ IOCON_PIO_DIGITAL_EN | /* Open drain is enabled */ IOCON_PIO_OPENDRAIN_EN); /* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */ IOCON_PinMuxSet(IOCON, 1U, 21U, port1_pin21_config); } /* clang-format off */ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* I2C4_DeinitPins: - options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} - pin_list: [] * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* clang-format on */ /* FUNCTION ************************************************************************************************************ * * Function Name : I2C4_DeinitPins * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ /* Function assigned for the Cortex-M33 (Core #0) */ void I2C4_DeinitPins(void) { } /*********************************************************************************************************************** * EOF **********************************************************************************************************************/