/*
 * Copyright 2018 -2021 NXP
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include "fsl_component_serial_manager.h"
#include "fsl_component_serial_port_internal.h"

#if (defined(SERIAL_PORT_TYPE_UART) && (SERIAL_PORT_TYPE_UART > 0U)) || \
    (defined(SERIAL_PORT_TYPE_UART_DMA) && (SERIAL_PORT_TYPE_UART_DMA > 0U))
#include "fsl_adapter_uart.h"

#include "fsl_component_serial_port_uart.h"

/*******************************************************************************
 * Definitions
 ******************************************************************************/
#ifndef NDEBUG
#if (defined(DEBUG_CONSOLE_ASSERT_DISABLE) && (DEBUG_CONSOLE_ASSERT_DISABLE > 0U))
#undef assert
#define assert(n)
#else
/* MISRA C-2012 Rule 17.2 */
#undef assert
#define assert(n) \
    while (!(n))  \
    {             \
        ;         \
    }
#endif
#endif

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
#define SERIAL_PORT_UART_RECEIVE_DATA_LENGTH 1U
typedef struct _serial_uart_send_state
{
    uint8_t *buffer;
    uint32_t length;
    serial_manager_callback_t callback;
    void *callbackParam;
    volatile uint8_t busy;
} serial_uart_send_state_t;

typedef struct _serial_uart_recv_state
{
    serial_manager_callback_t callback;
    void *callbackParam;
    volatile uint8_t busy;
    volatile uint8_t rxEnable;
    uint8_t readBuffer[SERIAL_PORT_UART_RECEIVE_DATA_LENGTH];
} serial_uart_recv_state_t;

typedef struct _serial_uart_dma_recv_state
{
    serial_manager_callback_t callback;
    void *callbackParam;
    volatile uint8_t busy;
    volatile uint8_t rxEnable;
    uint8_t readBuffer[SERIAL_PORT_UART_DMA_RECEIVE_DATA_LENGTH];
} serial_uart_dma_recv_state_t;

typedef struct _serial_uart_block_state
{
    UART_HANDLE_DEFINE(usartHandleBuffer);
} serial_uart_block_state_t;
#endif

typedef struct _serial_uart_state
{
    UART_HANDLE_DEFINE(usartHandleBuffer);
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    serial_uart_send_state_t tx;
    serial_uart_recv_state_t rx;
#endif
} serial_uart_state_t;
#endif
#if (defined(HAL_UART_DMA_ENABLE) && (HAL_UART_DMA_ENABLE > 0U))
#if (defined(SERIAL_PORT_TYPE_UART_DMA) && (SERIAL_PORT_TYPE_UART_DMA > 0U))
typedef struct _serial_uart_dma_state
{
    UART_HANDLE_DEFINE(usartHandleBuffer);
    UART_DMA_HANDLE_DEFINE(uartDmaHandle);
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    serial_uart_send_state_t tx;
    serial_uart_dma_recv_state_t rx;
#endif
} serial_uart_dma_state_t;
#endif
#endif

/*******************************************************************************
 * Prototypes
 ******************************************************************************/

/*******************************************************************************
 * Code
 ******************************************************************************/

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
static serial_manager_status_t Serial_UartEnableReceiving(serial_uart_state_t *serialUartHandle)
{
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
    hal_uart_transfer_t transfer;
#endif
    if (1U == serialUartHandle->rx.rxEnable)
    {
        serialUartHandle->rx.busy = 1U;
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
        transfer.data     = &serialUartHandle->rx.readBuffer[0];
        transfer.dataSize = sizeof(serialUartHandle->rx.readBuffer);
        if (kStatus_HAL_UartSuccess !=
            HAL_UartTransferReceiveNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), &transfer))
#else
        if (kStatus_HAL_UartSuccess !=
            HAL_UartReceiveNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
                                       &serialUartHandle->rx.readBuffer[0], sizeof(serialUartHandle->rx.readBuffer)))
#endif
        {
            serialUartHandle->rx.busy = 0U;
            return kStatus_SerialManager_Error;
        }
    }
    return kStatus_SerialManager_Success;
}

/* UART user callback */
static void Serial_UartCallback(hal_uart_handle_t handle, hal_uart_status_t status, void *userData)
{
    serial_uart_state_t *serialUartHandle;
    serial_manager_callback_message_t serialMsg;

    assert(userData);
    serialUartHandle = (serial_uart_state_t *)userData;

    if ((hal_uart_status_t)kStatus_HAL_UartRxIdle == status)
    {
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
        (void)HAL_UartTransferAbortReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#else
        (void)HAL_UartAbortReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#endif
        if ((NULL != serialUartHandle->rx.callback))
        {
            serialMsg.buffer = &serialUartHandle->rx.readBuffer[0];
            serialMsg.length = sizeof(serialUartHandle->rx.readBuffer);
            serialUartHandle->rx.callback(serialUartHandle->rx.callbackParam, &serialMsg,
                                          kStatus_SerialManager_Success);
        }
    }
    else if ((hal_uart_status_t)kStatus_HAL_UartTxIdle == status)
    {
        if (0U != serialUartHandle->tx.busy)
        {
            serialUartHandle->tx.busy = 0U;
            if ((NULL != serialUartHandle->tx.callback))
            {
                serialMsg.buffer = serialUartHandle->tx.buffer;
                serialMsg.length = serialUartHandle->tx.length;
                serialUartHandle->tx.callback(serialUartHandle->tx.callbackParam, &serialMsg,
                                              kStatus_SerialManager_Success);
            }
        }
    }
    else
    {
    }
}
#endif

serial_manager_status_t Serial_UartInit(serial_handle_t serialHandle, void *serialConfig)
{
    serial_uart_state_t *serialUartHandle;
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    serial_port_uart_config_t *uartConfig = (serial_port_uart_config_t *)serialConfig;
#endif
    serial_manager_status_t serialManagerStatus = kStatus_SerialManager_Success;
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
#if 0 /* Not used below! */
    hal_uart_transfer_t transfer;
#endif
#endif
#endif

    assert(serialConfig);
    assert(serialHandle);
    assert(SERIAL_PORT_UART_HANDLE_SIZE >= sizeof(serial_uart_state_t));

    serialUartHandle    = (serial_uart_state_t *)serialHandle;
    serialManagerStatus = (serial_manager_status_t)HAL_UartInit(
        ((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), (const hal_uart_config_t *)serialConfig);
    assert(kStatus_SerialManager_Success == serialManagerStatus);
    (void)serialManagerStatus;

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    serialUartHandle->rx.rxEnable = uartConfig->enableRx;
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))

    (void)HAL_UartTransferInstallCallback(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
                                          Serial_UartCallback, serialUartHandle);
#else
    (void)HAL_UartInstallCallback(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), Serial_UartCallback,
                                  serialUartHandle);
#endif
#endif

    return serialManagerStatus;
}

serial_manager_status_t Serial_UartDeinit(serial_handle_t serialHandle)
{
    serial_uart_state_t *serialUartHandle;

    assert(serialHandle);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
    (void)HAL_UartTransferAbortReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#else
    (void)HAL_UartAbortReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#endif
#endif
    (void)HAL_UartDeinit(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    serialUartHandle->tx.busy = 0U;
    serialUartHandle->rx.busy = 0U;
#endif

    return kStatus_SerialManager_Success;
}

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))

serial_manager_status_t Serial_UartWrite(serial_handle_t serialHandle, uint8_t *buffer, uint32_t length)
{
    serial_uart_state_t *serialUartHandle;
    hal_uart_status_t uartstatus;
#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
    hal_uart_transfer_t transfer;
#endif

    assert(serialHandle);
    assert(buffer);
    assert(length);

    serialUartHandle = (serial_uart_state_t *)serialHandle;
    if (0U != serialUartHandle->tx.busy)
    {
        return kStatus_SerialManager_Busy;
    }
    serialUartHandle->tx.busy = 1U;

    serialUartHandle->tx.buffer = buffer;
    serialUartHandle->tx.length = length;

#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
    transfer.data     = buffer;
    transfer.dataSize = length;
    uartstatus =
        HAL_UartTransferSendNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), &transfer);
#else

    uartstatus = HAL_UartSendNonBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), buffer, length);
#endif
    assert(kStatus_HAL_UartSuccess == uartstatus);
    (void)uartstatus;

    return kStatus_SerialManager_Success;
}

serial_manager_status_t Serial_UartRead(serial_handle_t serialHandle, uint8_t *buffer, uint32_t length)
{
    assert(serialHandle);
    (void)buffer;
    (void)length;
    return (serial_manager_status_t)Serial_UartEnableReceiving(serialHandle);
}

#else

serial_manager_status_t Serial_UartWrite(serial_handle_t serialHandle, uint8_t *buffer, uint32_t length)
{
    serial_uart_state_t *serialUartHandle;

    assert(serialHandle);
    assert(buffer);
    assert(length);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

    return (serial_manager_status_t)HAL_UartSendBlocking(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
                                                         buffer, length);
}

serial_manager_status_t Serial_UartRead(serial_handle_t serialHandle, uint8_t *buffer, uint32_t length)
{
    serial_uart_state_t *serialUartHandle;

    assert(serialHandle);
    assert(buffer);
    assert(length);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

    return (serial_manager_status_t)HAL_UartReceiveBlocking(
        ((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), buffer, length);
}

#endif

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
serial_manager_status_t Serial_UartCancelWrite(serial_handle_t serialHandle)
{
    serial_uart_state_t *serialUartHandle;
    serial_manager_callback_message_t serialMsg;
    uint32_t primask;
    uint8_t isBusy = 0U;

    assert(serialHandle);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

    primask                   = DisableGlobalIRQ();
    isBusy                    = serialUartHandle->tx.busy;
    serialUartHandle->tx.busy = 0U;
    EnableGlobalIRQ(primask);

#if (defined(HAL_UART_TRANSFER_MODE) && (HAL_UART_TRANSFER_MODE > 0U))
    (void)HAL_UartTransferAbortSend(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#else
    (void)HAL_UartAbortSend(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
#endif
    if (0U != isBusy)
    {
        if ((NULL != serialUartHandle->tx.callback))
        {
            serialMsg.buffer = serialUartHandle->tx.buffer;
            serialMsg.length = serialUartHandle->tx.length;
            serialUartHandle->tx.callback(serialUartHandle->tx.callbackParam, &serialMsg,
                                          kStatus_SerialManager_Canceled);
        }
    }
    return kStatus_SerialManager_Success;
}

serial_manager_status_t Serial_UartInstallTxCallback(serial_handle_t serialHandle,
                                                     serial_manager_callback_t callback,
                                                     void *callbackParam)
{
    serial_uart_state_t *serialUartHandle;

    assert(serialHandle);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

    serialUartHandle->tx.callback      = callback;
    serialUartHandle->tx.callbackParam = callbackParam;

    return kStatus_SerialManager_Success;
}

serial_manager_status_t Serial_UartInstallRxCallback(serial_handle_t serialHandle,
                                                     serial_manager_callback_t callback,
                                                     void *callbackParam)
{
    serial_uart_state_t *serialUartHandle;

    assert(serialHandle);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

    serialUartHandle->rx.callback      = callback;
    serialUartHandle->rx.callbackParam = callbackParam;

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    (void)Serial_UartEnableReceiving(serialUartHandle);
#endif
    return kStatus_SerialManager_Success;
}

void Serial_UartIsrFunction(serial_handle_t serialHandle)
{
    serial_uart_state_t *serialUartHandle;

    assert(serialHandle);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

    HAL_UartIsrFunction(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
}
#endif

serial_manager_status_t Serial_UartEnterLowpower(serial_handle_t serialHandle)
{
    serial_uart_state_t *serialUartHandle;
    hal_uart_status_t uartstatus;

    assert(serialHandle);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

    uartstatus = HAL_UartEnterLowpower(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
    assert(kStatus_HAL_UartSuccess == uartstatus);
    (void)uartstatus;

    return kStatus_SerialManager_Success;
}

serial_manager_status_t Serial_UartExitLowpower(serial_handle_t serialHandle)
{
    serial_uart_state_t *serialUartHandle;
    serial_manager_status_t status = kStatus_SerialManager_Success;
    hal_uart_status_t uartstatus;

    assert(serialHandle);

    serialUartHandle = (serial_uart_state_t *)serialHandle;

    uartstatus = HAL_UartExitLowpower(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
    assert(kStatus_HAL_UartSuccess == uartstatus);
    (void)uartstatus;

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    status = Serial_UartEnableReceiving(serialUartHandle);
#endif

    return status;
}

#if (defined(HAL_UART_DMA_ENABLE) && (HAL_UART_DMA_ENABLE > 0U))
#if (defined(SERIAL_PORT_TYPE_UART_DMA) && (SERIAL_PORT_TYPE_UART_DMA > 0U))
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
static serial_manager_status_t Serial_UartDmaEnableReceiving(serial_uart_dma_state_t *serialUartHandle)
{
    if (1U == serialUartHandle->rx.rxEnable)
    {
        serialUartHandle->rx.busy = 1U;
        if (kStatus_HAL_UartDmaSuccess !=
            HAL_UartDMATransferReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
                                       &serialUartHandle->rx.readBuffer[0], sizeof(serialUartHandle->rx.readBuffer),
                                       false))

        {
            serialUartHandle->rx.busy = 0U;
            return kStatus_SerialManager_Error;
        }
    }
    return kStatus_SerialManager_Success;
}

/* UART user callback */
static void Serial_UartDmaCallback(hal_uart_dma_handle_t handle, hal_dma_callback_msg_t *dmaMsg, void *callbackParam)
{
    serial_uart_dma_state_t *serialUartHandle;
    serial_manager_callback_message_t cb_msg;

    assert(callbackParam);
    serialUartHandle = (serial_uart_dma_state_t *)callbackParam;

    if (((hal_uart_dma_status_t)kStatus_HAL_UartDmaRxIdle == dmaMsg->status) ||
        (kStatus_HAL_UartDmaIdleline == dmaMsg->status))
    {
        if ((NULL != serialUartHandle->rx.callback))
        {
            cb_msg.buffer = dmaMsg->data;
            cb_msg.length = dmaMsg->dataSize;
            serialUartHandle->rx.callback(serialUartHandle->rx.callbackParam, &cb_msg, kStatus_SerialManager_Success);
        }

        if (kStatus_HAL_UartDmaSuccess ==
            HAL_UartDMATransferReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
                                       &serialUartHandle->rx.readBuffer[0], sizeof(serialUartHandle->rx.readBuffer),
                                       false))
        {
            serialUartHandle->rx.busy = 1U;
        }
    }
    else if (kStatus_HAL_UartDmaTxIdle == dmaMsg->status)
    {
        if (0U != serialUartHandle->tx.busy)
        {
            serialUartHandle->tx.busy = 0U;
            if ((NULL != serialUartHandle->tx.callback))
            {
                cb_msg.buffer = dmaMsg->data;
                cb_msg.length = dmaMsg->dataSize;
                serialUartHandle->tx.callback(serialUartHandle->tx.callbackParam, &cb_msg,
                                              kStatus_SerialManager_Success);
            }
        }
    }
    else
    {
    }
}

#endif

serial_manager_status_t Serial_UartDmaInit(serial_handle_t serialHandle, void *serialConfig)
{
    serial_uart_dma_state_t *serialUartHandle;
#if (defined(HAL_UART_DMA_ENABLE) && (HAL_UART_DMA_ENABLE > 0U))
    serial_port_uart_dma_config_t *uartConfig = (serial_port_uart_dma_config_t *)serialConfig;
#endif
    serial_manager_status_t serialManagerStatus = kStatus_SerialManager_Success;

    assert(serialConfig);
    assert(serialHandle);

    assert(SERIAL_PORT_UART_DMA_HANDLE_SIZE >= sizeof(serial_uart_dma_state_t));

    serialUartHandle    = (serial_uart_dma_state_t *)serialHandle;
    serialManagerStatus = (serial_manager_status_t)HAL_UartInit(
        ((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), (const hal_uart_config_t *)serialConfig);
    assert(kStatus_SerialManager_Success == serialManagerStatus);
    (void)serialManagerStatus;

#if (defined(HAL_UART_DMA_ENABLE) && (HAL_UART_DMA_ENABLE > 0U))

    hal_uart_dma_config_t dmaConfig;

    dmaConfig.uart_instance             = uartConfig->instance;
    dmaConfig.dma_instance              = uartConfig->dma_instance;
    dmaConfig.rx_channel                = uartConfig->rx_channel;
    dmaConfig.tx_channel                = uartConfig->tx_channel;
    dmaConfig.dma_mux_configure         = uartConfig->dma_mux_configure;
    dmaConfig.dma_channel_mux_configure = uartConfig->dma_channel_mux_configure;

    // Init uart dma
    (void)HAL_UartDMAInit(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
                          (hal_uart_dma_handle_t *)serialUartHandle->uartDmaHandle, &dmaConfig);

#endif
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))

    serialUartHandle->rx.rxEnable = uartConfig->enableRx;
    (void)HAL_UartDMATransferInstallCallback(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]),
                                             Serial_UartDmaCallback, serialUartHandle);

#endif
#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    serialManagerStatus = Serial_UartDmaEnableReceiving(serialUartHandle);
#endif

    return serialManagerStatus;
}

serial_manager_status_t Serial_UartDmaDeinit(serial_handle_t serialHandle)
{
    serial_uart_dma_state_t *serialUartHandle;

    assert(serialHandle);

    serialUartHandle = (serial_uart_dma_state_t *)serialHandle;

    (void)HAL_UartDMAAbortReceive(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));

    (void)HAL_UartDeinit(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
    (void)HAL_UartDMADeinit(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
    serialUartHandle->tx.busy = 0U;
    serialUartHandle->rx.busy = 0U;
#endif

    return kStatus_SerialManager_Success;
}

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))

serial_manager_status_t Serial_UartDmaWrite(serial_handle_t serialHandle, uint8_t *buffer, uint32_t length)
{
    serial_uart_dma_state_t *serialUartHandle;
    hal_uart_status_t uartstatus;

    assert(serialHandle);
    assert(buffer);
    assert(length);

    serialUartHandle = (serial_uart_dma_state_t *)serialHandle;

    if (0U != serialUartHandle->tx.busy)
    {
        return kStatus_SerialManager_Busy;
    }
    serialUartHandle->tx.busy = 1U;

    serialUartHandle->tx.buffer = buffer;
    serialUartHandle->tx.length = length;

    uartstatus = (hal_uart_status_t)HAL_UartDMATransferSend(
        ((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]), buffer, length);

    assert(kStatus_HAL_UartSuccess == uartstatus);
    (void)uartstatus;

    return kStatus_SerialManager_Success;
}

#endif

#if (defined(SERIAL_MANAGER_NON_BLOCKING_MODE) && (SERIAL_MANAGER_NON_BLOCKING_MODE > 0U))
serial_manager_status_t Serial_UartDmaCancelWrite(serial_handle_t serialHandle)
{
    serial_uart_dma_state_t *serialUartHandle;
    serial_manager_callback_message_t serialMsg;
    uint32_t primask;
    uint8_t isBusy = 0U;

    assert(serialHandle);

    serialUartHandle = (serial_uart_dma_state_t *)serialHandle;

    primask                   = DisableGlobalIRQ();
    isBusy                    = serialUartHandle->tx.busy;
    serialUartHandle->tx.busy = 0U;
    EnableGlobalIRQ(primask);

    (void)HAL_UartDMAAbortSend(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));

    if (0U != isBusy)
    {
        if ((NULL != serialUartHandle->tx.callback))
        {
            serialMsg.buffer = serialUartHandle->tx.buffer;
            serialMsg.length = serialUartHandle->tx.length;
            serialUartHandle->tx.callback(serialUartHandle->tx.callbackParam, &serialMsg,
                                          kStatus_SerialManager_Canceled);
        }
    }
    return kStatus_SerialManager_Success;
}

serial_manager_status_t Serial_UartDmaInstallTxCallback(serial_handle_t serialHandle,
                                                        serial_manager_callback_t callback,
                                                        void *callbackParam)
{
    serial_uart_dma_state_t *serialUartHandle;

    assert(serialHandle);

    serialUartHandle = (serial_uart_dma_state_t *)serialHandle;

    serialUartHandle->tx.callback      = callback;
    serialUartHandle->tx.callbackParam = callbackParam;

    return kStatus_SerialManager_Success;
}

serial_manager_status_t Serial_UartDmaInstallRxCallback(serial_handle_t serialHandle,
                                                        serial_manager_callback_t callback,
                                                        void *callbackParam)
{
    serial_uart_dma_state_t *serialUartHandle;

    assert(serialHandle);

    serialUartHandle = (serial_uart_dma_state_t *)serialHandle;

    serialUartHandle->rx.callback      = callback;
    serialUartHandle->rx.callbackParam = callbackParam;

    return kStatus_SerialManager_Success;
}

void Serial_UartDmaIsrFunction(serial_handle_t serialHandle)
{
    serial_uart_dma_state_t *serialUartHandle;

    assert(serialHandle);

    serialUartHandle = (serial_uart_dma_state_t *)serialHandle;

    HAL_UartIsrFunction(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
}
#endif

serial_manager_status_t Serial_UartDmaEnterLowpower(serial_handle_t serialHandle)
{
    serial_uart_dma_state_t *serialUartHandle;
    hal_uart_status_t uartstatus;

    assert(serialHandle);

    serialUartHandle = (serial_uart_dma_state_t *)serialHandle;

    uartstatus = HAL_UartEnterLowpower(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
    assert(kStatus_HAL_UartSuccess == uartstatus);
    (void)uartstatus;

    return kStatus_SerialManager_Success;
}

serial_manager_status_t Serial_UartDmaExitLowpower(serial_handle_t serialHandle)
{
    serial_uart_dma_state_t *serialUartHandle;
    serial_manager_status_t status = kStatus_SerialManager_Success;
    hal_uart_status_t uartstatus;

    assert(serialHandle);

    serialUartHandle = (serial_uart_dma_state_t *)serialHandle;

    uartstatus = HAL_UartExitLowpower(((hal_uart_handle_t)&serialUartHandle->usartHandleBuffer[0]));
    assert(kStatus_HAL_UartSuccess == uartstatus);
    (void)uartstatus;

    return status;
}
#endif
#endif