/*
 * Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
 * Copyright 2016-2021 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include "fsl_common.h"

/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.common_arm"
#endif

#ifndef __GIC_PRIO_BITS
#if defined(ENABLE_RAM_VECTOR_TABLE)
uint32_t InstallIRQHandler(IRQn_Type irq, uint32_t irqHandler)
{
#ifdef __VECTOR_TABLE
#undef __VECTOR_TABLE
#endif

/* Addresses for VECTOR_TABLE and VECTOR_RAM come from the linker file */
#if defined(__CC_ARM) || defined(__ARMCC_VERSION)
    extern uint32_t Image$$VECTOR_ROM$$Base[];
    extern uint32_t Image$$VECTOR_RAM$$Base[];
    extern uint32_t Image$$VECTOR_RAM$$ZI$$Limit[];

#define __VECTOR_TABLE          Image$$VECTOR_ROM$$Base
#define __VECTOR_RAM            Image$$VECTOR_RAM$$Base
#define __RAM_VECTOR_TABLE_SIZE (((uint32_t)Image$$VECTOR_RAM$$ZI$$Limit - (uint32_t)Image$$VECTOR_RAM$$Base))
#elif defined(__ICCARM__)
    extern uint32_t __RAM_VECTOR_TABLE_SIZE[];
    extern uint32_t __VECTOR_TABLE[];
    extern uint32_t __VECTOR_RAM[];
#elif defined(__GNUC__)
    extern uint32_t __VECTOR_TABLE[];
    extern uint32_t __VECTOR_RAM[];
    extern uint32_t __RAM_VECTOR_TABLE_SIZE_BYTES[];
    uint32_t __RAM_VECTOR_TABLE_SIZE = (uint32_t)(__RAM_VECTOR_TABLE_SIZE_BYTES);
#endif /* defined(__CC_ARM) || defined(__ARMCC_VERSION) */
    uint32_t n;
    uint32_t ret;
    uint32_t irqMaskValue;

    irqMaskValue = DisableGlobalIRQ();
    if (SCB->VTOR != (uint32_t)__VECTOR_RAM)
    {
        /* Copy the vector table from ROM to RAM */
        for (n = 0; n < ((uint32_t)__RAM_VECTOR_TABLE_SIZE) / sizeof(uint32_t); n++)
        {
            __VECTOR_RAM[n] = __VECTOR_TABLE[n];
        }
        /* Point the VTOR to the position of vector table */
        SCB->VTOR = (uint32_t)__VECTOR_RAM;
    }

    ret = __VECTOR_RAM[(int32_t)irq + 16];
    /* make sure the __VECTOR_RAM is noncachable */
    __VECTOR_RAM[(int32_t)irq + 16] = irqHandler;

    EnableGlobalIRQ(irqMaskValue);

    return ret;
}
#endif /* ENABLE_RAM_VECTOR_TABLE. */
#endif /* __GIC_PRIO_BITS. */

#if (defined(FSL_FEATURE_SOC_SYSCON_COUNT) && (FSL_FEATURE_SOC_SYSCON_COUNT > 0))

/*
 * When FSL_FEATURE_POWERLIB_EXTEND is defined to non-zero value,
 * powerlib should be used instead of these functions.
 */
#if !(defined(FSL_FEATURE_POWERLIB_EXTEND) && (FSL_FEATURE_POWERLIB_EXTEND != 0))

/*
 * When the SYSCON STARTER registers are discontinuous, these functions are
 * implemented in fsl_power.c.
 */
#if !(defined(FSL_FEATURE_SYSCON_STARTER_DISCONTINUOUS) && FSL_FEATURE_SYSCON_STARTER_DISCONTINUOUS)

void EnableDeepSleepIRQ(IRQn_Type interrupt)
{
    uint32_t intNumber = (uint32_t)interrupt;

    uint32_t index = 0;

    while (intNumber >= 32u)
    {
        index++;
        intNumber -= 32u;
    }

    SYSCON->STARTERSET[index] = 1UL << intNumber;
    (void)EnableIRQ(interrupt); /* also enable interrupt at NVIC */
}

void DisableDeepSleepIRQ(IRQn_Type interrupt)
{
    uint32_t intNumber = (uint32_t)interrupt;

    (void)DisableIRQ(interrupt); /* also disable interrupt at NVIC */
    uint32_t index = 0;

    while (intNumber >= 32u)
    {
        index++;
        intNumber -= 32u;
    }

    SYSCON->STARTERCLR[index] = 1UL << intNumber;
}
#endif /* FSL_FEATURE_SYSCON_STARTER_DISCONTINUOUS */
#endif /* FSL_FEATURE_POWERLIB_EXTEND */
#endif /* FSL_FEATURE_SOC_SYSCON_COUNT */

#if defined(DWT)
/* Use WDT. */
void MSDK_EnableCpuCycleCounter(void)
{
    /* Make sure the DWT trace fucntion is enabled. */
    if (CoreDebug_DEMCR_TRCENA_Msk != (CoreDebug_DEMCR_TRCENA_Msk & CoreDebug->DEMCR))
    {
        CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
    }

    /* CYCCNT not supported on this device. */
    assert(DWT_CTRL_NOCYCCNT_Msk != (DWT->CTRL & DWT_CTRL_NOCYCCNT_Msk));

    /* Read CYCCNT directly if CYCCENT has already been enabled, otherwise enable CYCCENT first. */
    if (DWT_CTRL_CYCCNTENA_Msk != (DWT_CTRL_CYCCNTENA_Msk & DWT->CTRL))
    {
        DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
    }
}

uint32_t MSDK_GetCpuCycleCount(void)
{
    return DWT->CYCCNT;
}
#endif /* defined(DWT) */

#if !(defined(SDK_DELAY_USE_DWT) && defined(DWT))
/* Use software loop. */
#if defined(__CC_ARM) /* This macro is arm v5 specific */
/* clang-format off */
__ASM static void DelayLoop(uint32_t count)
{
loop
    SUBS R0, R0, #1
    CMP  R0, #0
    BNE  loop
    BX   LR
}
#elif defined(__ARM_ARCH_8A__) /* This macro is ARMv8-A specific */
static void DelayLoop(uint32_t count)
{
    __ASM volatile("    MOV    X0, %0" : : "r"(count));
    __ASM volatile(
        "loop:                          \n"
        "    SUB    X0, X0, #1          \n"
        "    CMP    X0, #0              \n"

        "    BNE    loop                \n"
        :
        :
        : "r0");
}
/* clang-format on */
#elif defined(__ARMCC_VERSION) || defined(__ICCARM__) || defined(__GNUC__)
/* Cortex-M0 has a smaller instruction set, SUBS isn't supported in thumb-16 mode reported from __GNUC__ compiler,
 * use SUB and CMP here for compatibility */
static void DelayLoop(uint32_t count)
{
    __ASM volatile("    MOV    R0, %0" : : "r"(count));
    __ASM volatile(
        "loop:                          \n"
#if defined(__GNUC__) && !defined(__ARMCC_VERSION)
        "    SUB    R0, R0, #1          \n"
#else
        "    SUBS   R0, R0, #1          \n"
#endif
        "    CMP    R0, #0              \n"

        "    BNE    loop                \n"
        :
        :
        : "r0");
}
#endif /* defined(__CC_ARM) */
#endif /* defined(SDK_DELAY_USE_DWT) && defined(DWT) */

/*!
 * @brief Delay at least for some time.
 *  Please note that, if not uses DWT, this API will use while loop for delay, different run-time environments have
 *  effect on the delay time. If precise delay is needed, please enable DWT delay. The two parmeters delayTime_us and
 *  coreClock_Hz have limitation. For example, in the platform with 1GHz coreClock_Hz, the delayTime_us only supports
 *  up to 4294967 in current code. If long time delay is needed, please implement a new delay function.
 *
 * @param delayTime_us  Delay time in unit of microsecond.
 * @param coreClock_Hz  Core clock frequency with Hz.
 */
void SDK_DelayAtLeastUs(uint32_t delayTime_us, uint32_t coreClock_Hz)
{
    uint64_t count;

    if (delayTime_us > 0U)
    {
        count = USEC_TO_COUNT(delayTime_us, coreClock_Hz);

        assert(count <= UINT32_MAX);

#if defined(SDK_DELAY_USE_DWT) && defined(DWT) /* Use DWT for better accuracy */

        MSDK_EnableCpuCycleCounter();
        /* Calculate the count ticks. */
        count += MSDK_GetCpuCycleCount();

        if (count > UINT32_MAX)
        {
            count -= UINT32_MAX;
            /* Wait for cyccnt overflow. */
            while (count < MSDK_GetCpuCycleCount())
            {
            }
        }

        /* Wait for cyccnt reach count value. */
        while (count > MSDK_GetCpuCycleCount())
        {
        }
#else
        /* Divide value may be different in various environment to ensure delay is precise.
         * Every loop count includes three instructions, due to Cortex-M7 sometimes executes
         * two instructions in one period, through test here set divide 1.5. Other M cores use
         * divide 4. By the way, divide 1.5 or 4 could let the count lose precision, but it does
         * not matter because other instructions outside while loop is enough to fill the time.
         */
#if (__CORTEX_M == 7)
        count = count / 3U * 2U;
#else
        count = count / 4U;
#endif
        DelayLoop((uint32_t)count);
#endif /* defined(SDK_DELAY_USE_DWT) && defined(DWT) */
    }
}