/*
 * Copyright (c) 2016, Freescale Semiconductor, Inc.
 * Copyright 2016-2022 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef FSL_DMA_H_
#define FSL_DMA_H_

#include "fsl_common.h"

/*!
 * @addtogroup dma
 * @{
 */

/*! @file */
/*******************************************************************************
 * Definitions
 ******************************************************************************/

/*! @name Driver version */
/*! @{ */
/*! @brief DMA driver version */
#define FSL_DMA_DRIVER_VERSION (MAKE_VERSION(2, 5, 1)) /*!< Version 2.5.1. */
/*! @} */

/*! @brief DMA max transfer size */
#define DMA_MAX_TRANSFER_COUNT 0x400U
/*! @brief DMA channel numbers */
#if defined FSL_FEATURE_DMA_NUMBER_OF_CHANNELS
#define FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(x) FSL_FEATURE_DMA_NUMBER_OF_CHANNELS
#define FSL_FEATURE_DMA_MAX_CHANNELS           FSL_FEATURE_DMA_NUMBER_OF_CHANNELS
#define FSL_FEATURE_DMA_ALL_CHANNELS           (FSL_FEATURE_DMA_NUMBER_OF_CHANNELS * FSL_FEATURE_SOC_DMA_COUNT)
#endif
/*! @brief DMA head link descriptor table align size */
#define FSL_FEATURE_DMA_LINK_DESCRIPTOR_ALIGN_SIZE (16U)
/*! @brief DMA head descriptor table allocate macro
 * To simplify user interface, this macro will help allocate descriptor memory,
 * user just need to provide the name and the number for the allocate descriptor.
 *
 * @param name Allocate decriptor name.
 * @param number Number of descriptor to be allocated.
 */
#define DMA_ALLOCATE_HEAD_DESCRIPTORS(name, number) \
    SDK_ALIGN(dma_descriptor_t name[number], FSL_FEATURE_DMA_DESCRIPTOR_ALIGN_SIZE)
/*! @brief DMA head descriptor table allocate macro at noncacheable section
 * To simplify user interface, this macro will help allocate descriptor memory at noncacheable section,
 * user just need to provide the name and the number for the allocate descriptor.
 *
 * @param name Allocate decriptor name.
 * @param number Number of descriptor to be allocated.
 */
#define DMA_ALLOCATE_HEAD_DESCRIPTORS_AT_NONCACHEABLE(name, number) \
    AT_NONCACHEABLE_SECTION_ALIGN(dma_descriptor_t name[number], FSL_FEATURE_DMA_DESCRIPTOR_ALIGN_SIZE)
/*! @brief DMA link descriptor table allocate macro
 * To simplify user interface, this macro will help allocate descriptor memory,
 * user just need to provide the name and the number for the allocate descriptor.
 *
 * @param name Allocate decriptor name.
 * @param number Number of descriptor to be allocated.
 */
#define DMA_ALLOCATE_LINK_DESCRIPTORS(name, number) \
    SDK_ALIGN(dma_descriptor_t name[number], FSL_FEATURE_DMA_LINK_DESCRIPTOR_ALIGN_SIZE)
/*! @brief DMA link descriptor table allocate macro at noncacheable section
 * To simplify user interface, this macro will help allocate descriptor memory at noncacheable section,
 * user just need to provide the name and the number for the allocate descriptor.
 *
 * @param name Allocate decriptor name.
 * @param number Number of descriptor to be allocated.
 */
#define DMA_ALLOCATE_LINK_DESCRIPTORS_AT_NONCACHEABLE(name, number) \
    AT_NONCACHEABLE_SECTION_ALIGN(dma_descriptor_t name[number], FSL_FEATURE_DMA_LINK_DESCRIPTOR_ALIGN_SIZE)
/*! @brief DMA transfer buffer address need to align with the transfer width */
#define DMA_ALLOCATE_DATA_TRANSFER_BUFFER(name, width) SDK_ALIGN(name, width)
/* Channel group consists of 32 channels. channel_group = 0 */
#define DMA_CHANNEL_GROUP(channel) (((uint8_t)(channel)) >> 5U)
/* Channel index in channel group. channel_index = (channel % (channel number per instance)) */
#define DMA_CHANNEL_INDEX(base, channel) (((uint8_t)(channel)) & 0x1FU)
/*! @brief DMA linked descriptor address algin size */
#define DMA_COMMON_REG_GET(base, channel, reg) \
    (((volatile uint32_t *)(&((base)->COMMON[0].reg)))[DMA_CHANNEL_GROUP(channel)])
#define DMA_COMMON_CONST_REG_GET(base, channel, reg) \
    (((volatile const uint32_t *)(&((base)->COMMON[0].reg)))[DMA_CHANNEL_GROUP(channel)])
#define DMA_COMMON_REG_SET(base, channel, reg, value) \
    (((volatile uint32_t *)(&((base)->COMMON[0].reg)))[DMA_CHANNEL_GROUP(channel)] = (value))

/*! @brief DMA descriptor end address calculate
 * @param start start address
 * @param inc address interleave size
 * @param bytes transfer bytes
 * @param width transfer width
 */
#define DMA_DESCRIPTOR_END_ADDRESS(start, inc, bytes, width) \
    ((uint32_t *)((uint32_t)(start) + (inc) * (bytes) - (inc) * (width)))

#define DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes) \
    (DMA_SetChannelXferConfig(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes))

/*! @brief _dma_transfer_status DMA transfer status */
enum
{
    kStatus_DMA_Busy = MAKE_STATUS(kStatusGroup_DMA, 0), /*!< Channel is busy and can't handle the
                                                                transfer request. */
};

/*! @brief _dma_addr_interleave_size dma address interleave size */
enum
{
    kDMA_AddressInterleave0xWidth = 0U, /*!< dma source/destination address no interleave */
    kDMA_AddressInterleave1xWidth = 1U, /*!< dma source/destination address interleave 1xwidth */
    kDMA_AddressInterleave2xWidth = 2U, /*!< dma source/destination address interleave 2xwidth */
    kDMA_AddressInterleave4xWidth = 4U, /*!< dma source/destination address interleave 3xwidth */
};

/*! @brief _dma_transfer_width dma transfer width */
enum
{
    kDMA_Transfer8BitWidth  = 1U, /*!< dma channel transfer bit width is 8 bit */
    kDMA_Transfer16BitWidth = 2U, /*!< dma channel transfer bit width is 16 bit */
    kDMA_Transfer32BitWidth = 4U, /*!< dma channel transfer bit width is 32 bit */
};

/*! @brief DMA descriptor structure */
typedef struct _dma_descriptor
{
    volatile uint32_t xfercfg; /*!< Transfer configuration */
    void *srcEndAddr;          /*!< Last source address of DMA transfer */
    void *dstEndAddr;          /*!< Last destination address of DMA transfer */
    void *linkToNextDesc;      /*!< Address of next DMA descriptor in chain */
} dma_descriptor_t;

/*! @brief DMA transfer configuration */
typedef struct _dma_xfercfg
{
    bool valid;             /*!< Descriptor is ready to transfer */
    bool reload;            /*!< Reload channel configuration register after
                                 current descriptor is exhausted */
    bool swtrig;            /*!< Perform software trigger. Transfer if fired
                                 when 'valid' is set */
    bool clrtrig;           /*!< Clear trigger */
    bool intA;              /*!< Raises IRQ when transfer is done and set IRQA status register flag */
    bool intB;              /*!< Raises IRQ when transfer is done and set IRQB status register flag */
    uint8_t byteWidth;      /*!< Byte width of data to transfer */
    uint8_t srcInc;         /*!< Increment source address by 'srcInc' x 'byteWidth' */
    uint8_t dstInc;         /*!< Increment destination address by 'dstInc' x 'byteWidth' */
    uint16_t transferCount; /*!< Number of transfers */
} dma_xfercfg_t;

/*! @brief DMA channel priority */
typedef enum _dma_priority
{
    kDMA_ChannelPriority0 = 0, /*!< Highest channel priority - priority 0 */
    kDMA_ChannelPriority1,     /*!< Channel priority 1 */
    kDMA_ChannelPriority2,     /*!< Channel priority 2 */
    kDMA_ChannelPriority3,     /*!< Channel priority 3 */
    kDMA_ChannelPriority4,     /*!< Channel priority 4 */
    kDMA_ChannelPriority5,     /*!< Channel priority 5 */
    kDMA_ChannelPriority6,     /*!< Channel priority 6 */
    kDMA_ChannelPriority7,     /*!< Lowest channel priority - priority 7 */
} dma_priority_t;

/*! @brief DMA interrupt flags */
typedef enum _dma_int
{
    kDMA_IntA,     /*!< DMA interrupt flag A */
    kDMA_IntB,     /*!< DMA interrupt flag B */
    kDMA_IntError, /*!< DMA interrupt flag error */
} dma_irq_t;

/*! @brief DMA trigger type*/
typedef enum _dma_trigger_type
{
    kDMA_NoTrigger        = 0,                                                         /*!< Trigger is disabled */
    kDMA_LowLevelTrigger  = DMA_CHANNEL_CFG_HWTRIGEN(1) | DMA_CHANNEL_CFG_TRIGTYPE(1), /*!< Low level active trigger */
    kDMA_HighLevelTrigger = DMA_CHANNEL_CFG_HWTRIGEN(1) | DMA_CHANNEL_CFG_TRIGTYPE(1) |
                            DMA_CHANNEL_CFG_TRIGPOL(1),    /*!< High level active trigger */
    kDMA_FallingEdgeTrigger = DMA_CHANNEL_CFG_HWTRIGEN(1), /*!< Falling edge active trigger */
    kDMA_RisingEdgeTrigger =
        DMA_CHANNEL_CFG_HWTRIGEN(1) | DMA_CHANNEL_CFG_TRIGPOL(1), /*!< Rising edge active trigger */
} dma_trigger_type_t;

/*! @brief _dma_burst_size DMA burst size*/
enum
{
    kDMA_BurstSize1    = 0U,  /*!< burst size 1 transfer */
    kDMA_BurstSize2    = 1U,  /*!< burst size 2 transfer */
    kDMA_BurstSize4    = 2U,  /*!< burst size 4 transfer */
    kDMA_BurstSize8    = 3U,  /*!< burst size 8 transfer */
    kDMA_BurstSize16   = 4U,  /*!< burst size 16 transfer */
    kDMA_BurstSize32   = 5U,  /*!< burst size 32 transfer */
    kDMA_BurstSize64   = 6U,  /*!< burst size 64 transfer */
    kDMA_BurstSize128  = 7U,  /*!< burst size 128 transfer */
    kDMA_BurstSize256  = 8U,  /*!< burst size 256 transfer */
    kDMA_BurstSize512  = 9U,  /*!< burst size 512 transfer */
    kDMA_BurstSize1024 = 10U, /*!< burst size 1024 transfer */
};

/*! @brief DMA trigger burst */
typedef enum _dma_trigger_burst
{
    kDMA_SingleTransfer     = 0,                            /*!< Single transfer */
    kDMA_LevelBurstTransfer = DMA_CHANNEL_CFG_TRIGBURST(1), /*!< Burst transfer driven by level trigger */
    kDMA_EdgeBurstTransfer1 = DMA_CHANNEL_CFG_TRIGBURST(1), /*!< Perform 1 transfer by edge trigger */
    kDMA_EdgeBurstTransfer2 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(1), /*!< Perform 2 transfers by edge trigger */
    kDMA_EdgeBurstTransfer4 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(2), /*!< Perform 4 transfers by edge trigger */
    kDMA_EdgeBurstTransfer8 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(3), /*!< Perform 8 transfers by edge trigger */
    kDMA_EdgeBurstTransfer16 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(4), /*!< Perform 16 transfers by edge trigger */
    kDMA_EdgeBurstTransfer32 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(5), /*!< Perform 32 transfers by edge trigger */
    kDMA_EdgeBurstTransfer64 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(6), /*!< Perform 64 transfers by edge trigger */
    kDMA_EdgeBurstTransfer128 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(7), /*!< Perform 128 transfers by edge trigger */
    kDMA_EdgeBurstTransfer256 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(8), /*!< Perform 256 transfers by edge trigger */
    kDMA_EdgeBurstTransfer512 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(9), /*!< Perform 512 transfers by edge trigger */
    kDMA_EdgeBurstTransfer1024 =
        DMA_CHANNEL_CFG_TRIGBURST(1) | DMA_CHANNEL_CFG_BURSTPOWER(10), /*!< Perform 1024 transfers by edge trigger */
} dma_trigger_burst_t;

/*! @brief DMA burst wrapping */
typedef enum _dma_burst_wrap
{
    kDMA_NoWrap        = 0,                               /*!< Wrapping is disabled */
    kDMA_SrcWrap       = DMA_CHANNEL_CFG_SRCBURSTWRAP(1), /*!< Wrapping is enabled for source */
    kDMA_DstWrap       = DMA_CHANNEL_CFG_DSTBURSTWRAP(1), /*!< Wrapping is enabled for destination */
    kDMA_SrcAndDstWrap = DMA_CHANNEL_CFG_SRCBURSTWRAP(1) |
                         DMA_CHANNEL_CFG_DSTBURSTWRAP(1), /*!< Wrapping is enabled for source and destination */
} dma_burst_wrap_t;

/*! @brief DMA transfer type */
typedef enum _dma_transfer_type
{
    kDMA_MemoryToMemory = 0x0U, /*!< Transfer from memory to memory (increment source and destination) */
    kDMA_PeripheralToMemory,    /*!< Transfer from peripheral to memory (increment only destination) */
    kDMA_MemoryToPeripheral,    /*!< Transfer from memory to peripheral (increment only source)*/
    kDMA_StaticToStatic,        /*!< Peripheral to static memory (do not increment source or destination) */
} dma_transfer_type_t;

/*! @brief DMA channel trigger */
typedef struct _dma_channel_trigger
{
    dma_trigger_type_t type;   /*!< Select hardware trigger as edge triggered or level triggered. */
    dma_trigger_burst_t burst; /*!< Select whether hardware triggers cause a single or burst transfer. */
    dma_burst_wrap_t wrap;     /*!< Select wrap type, source wrap or dest wrap, or both. */
} dma_channel_trigger_t;

/*! @brief DMA channel trigger */
typedef struct _dma_channel_config
{
    void *srcStartAddr;             /*!< Source data address */
    void *dstStartAddr;             /*!< Destination data address */
    void *nextDesc;                 /*!< Chain custom descriptor */
    uint32_t xferCfg;               /*!< channel transfer configurations */
    dma_channel_trigger_t *trigger; /*!< DMA trigger type */
    bool isPeriph;                  /*!< select the request type */
} dma_channel_config_t;

/*! @brief DMA transfer configuration */
typedef struct _dma_transfer_config
{
    uint8_t *srcAddr;      /*!< Source data address */
    uint8_t *dstAddr;      /*!< Destination data address */
    uint8_t *nextDesc;     /*!< Chain custom descriptor */
    dma_xfercfg_t xfercfg; /*!< Transfer options */
    bool isPeriph;         /*!< DMA transfer is driven by peripheral */
} dma_transfer_config_t;

/*! @brief Callback for DMA */
struct _dma_handle;

/*! @brief Define Callback function for DMA. */
typedef void (*dma_callback)(struct _dma_handle *handle, void *userData, bool transferDone, uint32_t intmode);

/*! @brief DMA transfer handle structure */
typedef struct _dma_handle
{
    dma_callback callback; /*!< Callback function. Invoked when transfer
                               of descriptor with interrupt flag finishes */
    void *userData;        /*!< Callback function parameter */
    DMA_Type *base;        /*!< DMA peripheral base address */
    uint8_t channel;       /*!< DMA channel number */
} dma_handle_t;

/*******************************************************************************
 * APIs
 ******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */

/*!
 * @name DMA initialization and De-initialization
 * @{
 */

/*!
 * @brief Initializes DMA peripheral.
 *
 * This function enable the DMA clock, set descriptor table and
 * enable DMA peripheral.
 *
 * @param base DMA peripheral base address.
 */
void DMA_Init(DMA_Type *base);

/*!
 * @brief Deinitializes DMA peripheral.
 *
 * This function gates the DMA clock.
 *
 * @param base DMA peripheral base address.
 */
void DMA_Deinit(DMA_Type *base);

/*!
 * @brief Install DMA descriptor memory.
 *
 * This function used to register DMA descriptor memory for linked transfer, a typical case is ping pong
 * transfer which will request more than one DMA descriptor memory space, althrough current DMA driver has
 * a default DMA descriptor buffer, but it support one DMA descriptor for one channel only.
 *
 * @param base DMA base address.
 * @param addr DMA descriptor address
 */
void DMA_InstallDescriptorMemory(DMA_Type *base, void *addr);

/*! @} */

/*!
 * @name DMA Channel Operation
 * @{
 */

/*!
 * @brief Return whether DMA channel is processing transfer
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 * @return True for active state, false otherwise.
 */
static inline bool DMA_ChannelIsActive(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));

    return (DMA_COMMON_CONST_REG_GET(base, channel, ACTIVE) & (1UL << DMA_CHANNEL_INDEX(base, channel))) != 0UL;
}

/*!
 * @brief Return whether DMA channel is busy
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 * @return True for busy state, false otherwise.
 */
static inline bool DMA_ChannelIsBusy(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));

    return (DMA_COMMON_CONST_REG_GET(base, channel, BUSY) & (1UL << DMA_CHANNEL_INDEX(base, channel))) != 0UL;
}

/*!
 * @brief Enables the interrupt source for the DMA transfer.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 */
static inline void DMA_EnableChannelInterrupts(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));
    DMA_COMMON_REG_GET(base, channel, INTENSET) |= 1UL << DMA_CHANNEL_INDEX(base, channel);
}

/*!
 * @brief Disables the interrupt source for the DMA transfer.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 */
static inline void DMA_DisableChannelInterrupts(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));
    DMA_COMMON_REG_GET(base, channel, INTENCLR) |= 1UL << DMA_CHANNEL_INDEX(base, channel);
}

/*!
 * @brief Enable DMA channel.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 */
static inline void DMA_EnableChannel(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));
    DMA_COMMON_REG_GET(base, channel, ENABLESET) |= 1UL << DMA_CHANNEL_INDEX(base, channel);
}

/*!
 * @brief Disable DMA channel.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 */
static inline void DMA_DisableChannel(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));
    DMA_COMMON_REG_GET(base, channel, ENABLECLR) |= 1UL << DMA_CHANNEL_INDEX(base, channel);
}

/*!
 * @brief Set PERIPHREQEN of channel configuration register.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 */
static inline void DMA_EnableChannelPeriphRq(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));
    base->CHANNEL[channel].CFG |= DMA_CHANNEL_CFG_PERIPHREQEN_MASK;
}

/*!
 * @brief Get PERIPHREQEN value of channel configuration register.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 * @return True for enabled PeriphRq, false for disabled.
 */
static inline void DMA_DisableChannelPeriphRq(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));
    base->CHANNEL[channel].CFG &= ~DMA_CHANNEL_CFG_PERIPHREQEN_MASK;
}

/*!
 * @brief Set trigger settings of DMA channel.
 * @deprecated Do not use this function.  It has been superceded by @ref DMA_SetChannelConfig.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 * @param trigger trigger configuration.
 */
void DMA_ConfigureChannelTrigger(DMA_Type *base, uint32_t channel, dma_channel_trigger_t *trigger);

/*!
 * @brief set channel config.
 *
 * This function provide a interface to configure channel configuration reisters.
 *
 * @param base DMA base address.
 * @param channel DMA channel number.
 * @param trigger channel configurations structure.
 * @param isPeriph true is periph request, false is not.
 */
void DMA_SetChannelConfig(DMA_Type *base, uint32_t channel, dma_channel_trigger_t *trigger, bool isPeriph);

/*! @brief DMA channel xfer transfer configurations
 *
 * @param reload true is reload link descriptor after current exhaust, false is not
 * @param clrTrig true is clear trigger status, wait software trigger, false is not
 * @param intA enable interruptA
 * @param intB enable interruptB
 * @param width transfer width
 * @param srcInc source address interleave size
 * @param dstInc destination address interleave size
 * @param bytes transfer bytes
 * @return The vaule of xfer config
 */
static inline uint32_t DMA_SetChannelXferConfig(
    bool reload, bool clrTrig, bool intA, bool intB, uint8_t width, uint8_t srcInc, uint8_t dstInc, uint32_t bytes)
{
    return (DMA_CHANNEL_XFERCFG_CFGVALID_MASK | DMA_CHANNEL_XFERCFG_RELOAD(reload) |
            DMA_CHANNEL_XFERCFG_CLRTRIG(clrTrig) | DMA_CHANNEL_XFERCFG_SETINTA(intA) |
            DMA_CHANNEL_XFERCFG_SETINTB(intB) |
            DMA_CHANNEL_XFERCFG_WIDTH((uint32_t)width == 4UL ? 2UL : ((uint32_t)width - 1UL)) |
            DMA_CHANNEL_XFERCFG_SRCINC((uint32_t)srcInc == 4UL ? ((uint32_t)srcInc - 1UL) : (uint32_t)srcInc) |
            DMA_CHANNEL_XFERCFG_DSTINC((uint32_t)dstInc == 4UL ? ((uint32_t)dstInc - 1UL) : (uint32_t)dstInc) |
            DMA_CHANNEL_XFERCFG_XFERCOUNT((uint32_t)bytes / (uint32_t)width - 1UL));
}

/*!
 * @brief Gets the remaining bytes of the current DMA descriptor transfer.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 * @return The number of bytes which have not been transferred yet.
 */
uint32_t DMA_GetRemainingBytes(DMA_Type *base, uint32_t channel);

/*!
 * @brief Set priority of channel configuration register.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 * @param priority Channel priority value.
 */
static inline void DMA_SetChannelPriority(DMA_Type *base, uint32_t channel, dma_priority_t priority)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));
    base->CHANNEL[channel].CFG =
        (base->CHANNEL[channel].CFG & (~(DMA_CHANNEL_CFG_CHPRIORITY_MASK))) | DMA_CHANNEL_CFG_CHPRIORITY(priority);
}

/*!
 * @brief Get priority of channel configuration register.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 * @return Channel priority value.
 */
static inline dma_priority_t DMA_GetChannelPriority(DMA_Type *base, uint32_t channel)
{
    assert((FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base) != -1) &&
           (channel < (uint32_t)FSL_FEATURE_DMA_NUMBER_OF_CHANNELSn(base)));
    return (dma_priority_t)(uint8_t)((base->CHANNEL[channel].CFG & DMA_CHANNEL_CFG_CHPRIORITY_MASK) >>
                                     DMA_CHANNEL_CFG_CHPRIORITY_SHIFT);
}

/*!
 * @brief Set channel configuration valid.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 */
static inline void DMA_SetChannelConfigValid(DMA_Type *base, uint32_t channel)
{
    base->CHANNEL[channel].XFERCFG |= DMA_CHANNEL_XFERCFG_CFGVALID_MASK;
}

/*!
 * @brief Do software trigger for the channel.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 */
static inline void DMA_DoChannelSoftwareTrigger(DMA_Type *base, uint32_t channel)
{
    base->CHANNEL[channel].XFERCFG |= DMA_CHANNEL_XFERCFG_SWTRIG_MASK;
}

/*!
 * @brief Load channel transfer configurations.
 *
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 * @param xfer transfer configurations.
 */
static inline void DMA_LoadChannelTransferConfig(DMA_Type *base, uint32_t channel, uint32_t xfer)
{
    base->CHANNEL[channel].XFERCFG = xfer;
}

/*!
 * @brief Create application specific DMA descriptor
 *        to be used in a chain in transfer
 * @deprecated Do not use this function.  It has been superceded by @ref DMA_SetupDescriptor.
 * @param desc DMA descriptor address.
 * @param xfercfg Transfer configuration for DMA descriptor.
 * @param srcAddr Address of last item to transmit
 * @param dstAddr Address of last item to receive.
 * @param nextDesc Address of next descriptor in chain.
 */
void DMA_CreateDescriptor(dma_descriptor_t *desc, dma_xfercfg_t *xfercfg, void *srcAddr, void *dstAddr, void *nextDesc);

/*!
 * @brief setup dma descriptor
 *
 * Note: This function do not support configure wrap descriptor.
 *
 * @param desc DMA descriptor address.
 * @param xfercfg Transfer configuration for DMA descriptor.
 * @param srcStartAddr Start address of source address.
 * @param dstStartAddr Start address of destination address.
 * @param nextDesc Address of next descriptor in chain.
 */
void DMA_SetupDescriptor(
    dma_descriptor_t *desc, uint32_t xfercfg, void *srcStartAddr, void *dstStartAddr, void *nextDesc);

/*!
 * @brief setup dma channel descriptor
 *
 * Note: This function support configure wrap descriptor.
 *
 * @param desc DMA descriptor address.
 * @param xfercfg Transfer configuration for DMA descriptor.
 * @param srcStartAddr Start address of source address.
 * @param dstStartAddr Start address of destination address.
 * @param nextDesc Address of next descriptor in chain.
 * @param wrapType burst wrap type.
 * @param burstSize burst size, reference _dma_burst_size.
 */
void DMA_SetupChannelDescriptor(dma_descriptor_t *desc,
                                uint32_t xfercfg,
                                void *srcStartAddr,
                                void *dstStartAddr,
                                void *nextDesc,
                                dma_burst_wrap_t wrapType,
                                uint32_t burstSize);

/*!
 * @brief load channel transfer decriptor.
 *
 * This function can be used to load desscriptor to driver internal channel descriptor that is used to start DMA
 * transfer, the head descriptor table is defined in DMA driver, it is useful for the case:
 * 1. for the polling transfer, application can allocate a local descriptor memory table to prepare a descriptor firstly
 * and then call this api to load the configured descriptor to driver descriptor table.
 * @code
 *   DMA_Init(DMA0);
 *   DMA_EnableChannel(DMA0, DEMO_DMA_CHANNEL);
 *   DMA_SetupDescriptor(desc, xferCfg, s_srcBuffer, &s_destBuffer[0], NULL);
 *   DMA_LoadChannelDescriptor(DMA0, DEMO_DMA_CHANNEL, (dma_descriptor_t *)desc);
 *   DMA_DoChannelSoftwareTrigger(DMA0, DEMO_DMA_CHANNEL);
 *   while(DMA_ChannelIsBusy(DMA0, DEMO_DMA_CHANNEL))
 *   {}
 * @endcode
 *
 * @param base DMA base address.
 * @param channel DMA channel.
 * @param descriptor configured DMA descriptor.
 */
void DMA_LoadChannelDescriptor(DMA_Type *base, uint32_t channel, dma_descriptor_t *descriptor);

/*! @} */

/*!
 * @name DMA Transactional Operation
 * @{
 */

/*!
 * @brief Abort running transfer by handle.
 *
 * This function aborts DMA transfer specified by handle.
 *
 * @param handle DMA handle pointer.
 */
void DMA_AbortTransfer(dma_handle_t *handle);

/*!
 * @brief Creates the DMA handle.
 *
 * This function is called if using transaction API for DMA. This function
 * initializes the internal state of DMA handle.
 *
 * @param handle DMA handle pointer. The DMA handle stores callback function and
 *               parameters.
 * @param base DMA peripheral base address.
 * @param channel DMA channel number.
 */
void DMA_CreateHandle(dma_handle_t *handle, DMA_Type *base, uint32_t channel);

/*!
 * @brief Installs a callback function for the DMA transfer.
 *
 * This callback is called in DMA IRQ handler. Use the callback to do something after
 * the current major loop transfer completes.
 *
 * @param handle DMA handle pointer.
 * @param callback DMA callback function pointer.
 * @param userData Parameter for callback function.
 */
void DMA_SetCallback(dma_handle_t *handle, dma_callback callback, void *userData);

/*!
 * @brief Prepares the DMA transfer structure.
 * @deprecated Do not use this function.  It has been superceded by @ref DMA_PrepareChannelTransfer.
 * This function prepares the transfer configuration structure according to the user input.
 *
 * @param config The user configuration structure of type dma_transfer_t.
 * @param srcAddr DMA transfer source address.
 * @param dstAddr DMA transfer destination address.
 * @param byteWidth DMA transfer destination address width(bytes).
 * @param transferBytes DMA transfer bytes to be transferred.
 * @param type DMA transfer type.
 * @param nextDesc Chain custom descriptor to transfer.
 * @note The data address and the data width must be consistent. For example, if the SRC
 *       is 4 bytes, so the source address must be 4 bytes aligned, or it shall result in
 *       source address error(SAE).
 */
void DMA_PrepareTransfer(dma_transfer_config_t *config,
                         void *srcAddr,
                         void *dstAddr,
                         uint32_t byteWidth,
                         uint32_t transferBytes,
                         dma_transfer_type_t type,
                         void *nextDesc);

/*!
 * @brief Prepare channel transfer configurations.
 *
 * This function used to prepare channel transfer configurations.
 *
 * @param config Pointer to DMA channel transfer configuration structure.
 * @param srcStartAddr source start address.
 * @param dstStartAddr destination start address.
 * @param xferCfg xfer configuration, user can reference DMA_CHANNEL_XFER about to how to get xferCfg value.
 * @param type transfer type.
 * @param trigger DMA channel trigger configurations.
 * @param nextDesc address of next descriptor.
 */
void DMA_PrepareChannelTransfer(dma_channel_config_t *config,
                                void *srcStartAddr,
                                void *dstStartAddr,
                                uint32_t xferCfg,
                                dma_transfer_type_t type,
                                dma_channel_trigger_t *trigger,
                                void *nextDesc);

/*!
 * @brief Submits the DMA transfer request.
 * @deprecated Do not use this function.  It has been superceded by @ref DMA_SubmitChannelTransfer.
 *
 * This function submits the DMA transfer request according to the transfer configuration structure.
 * If the user submits the transfer request repeatedly, this function packs an unprocessed request as
 * a TCD and enables scatter/gather feature to process it in the next time.
 *
 * @param handle DMA handle pointer.
 * @param config Pointer to DMA transfer configuration structure.
 * @retval kStatus_DMA_Success It means submit transfer request succeed.
 * @retval kStatus_DMA_QueueFull It means TCD queue is full. Submit transfer request is not allowed.
 * @retval kStatus_DMA_Busy It means the given channel is busy, need to submit request later.
 */
status_t DMA_SubmitTransfer(dma_handle_t *handle, dma_transfer_config_t *config);

/*!
 * @brief Submit channel transfer paramter directly.
 *
 * This function used to configue channel head descriptor that is used to start DMA transfer, the head descriptor table
 * is defined in DMA driver, it is useful for the case:
 * 1. for the single transfer, application doesn't need to allocate descriptor table, the head descriptor can be used
 for it.
 * @code
    DMA_SetChannelConfig(base, channel, trigger, isPeriph);
    DMA_CreateHandle(handle, base, channel)
    DMA_SubmitChannelTransferParameter(handle, DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc,
 bytes), srcStartAddr, dstStartAddr, NULL);
    DMA_StartTransfer(handle)
 * @endcode
 *
 * 2. for the linked transfer, application should responsible for link descriptor, for example, if 4 transfer is
 required, then application should prepare
 *  three descriptor table with macro , the head descriptor in driver can be used for the first transfer descriptor.
 * @code
    define link descriptor table in application with macro
    DMA_ALLOCATE_LINK_DESCRIPTOR(nextDesc[3]);

    DMA_SetupDescriptor(nextDesc0,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, nextDesc1);
    DMA_SetupDescriptor(nextDesc1,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, nextDesc2);
    DMA_SetupDescriptor(nextDesc2,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, NULL);
    DMA_SetChannelConfig(base, channel, trigger, isPeriph);
    DMA_CreateHandle(handle, base, channel)
    DMA_SubmitChannelTransferParameter(handle, DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc,
 bytes), srcStartAddr, dstStartAddr, nextDesc0);
    DMA_StartTransfer(handle);
 * @endcode
 *
 * @param handle Pointer to DMA handle.
 * @param xferCfg xfer configuration, user can reference DMA_CHANNEL_XFER about to how to get xferCfg value.
 * @param srcStartAddr source start address.
 * @param dstStartAddr destination start address.
 * @param nextDesc address of next descriptor.
 */
void DMA_SubmitChannelTransferParameter(
    dma_handle_t *handle, uint32_t xferCfg, void *srcStartAddr, void *dstStartAddr, void *nextDesc);

/*!
 * @brief Submit channel descriptor.
 *
 * This function used to configue channel head descriptor that is used to start DMA transfer, the head descriptor table
 is defined in
 * DMA driver, this functiono is typical for the ping pong case:
 *
 * 1. for the ping pong case, application should responsible for the descriptor, for example, application should
 * prepare two descriptor table with macro.
 * @code
    define link descriptor table in application with macro
    DMA_ALLOCATE_LINK_DESCRIPTOR(nextDesc[2]);

    DMA_SetupDescriptor(nextDesc0,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, nextDesc1);
    DMA_SetupDescriptor(nextDesc1,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, nextDesc0);
    DMA_SetChannelConfig(base, channel, trigger, isPeriph);
    DMA_CreateHandle(handle, base, channel)
    DMA_SubmitChannelDescriptor(handle,  nextDesc0);
    DMA_StartTransfer(handle);
 * @endcode
 *
 * @param handle Pointer to DMA handle.
 * @param descriptor descriptor to submit.
 */
void DMA_SubmitChannelDescriptor(dma_handle_t *handle, dma_descriptor_t *descriptor);

/*!
 * @brief Submits the DMA channel transfer request.
 *
 * This function submits the DMA transfer request according to the transfer configuration structure.
 * If the user submits the transfer request repeatedly, this function packs an unprocessed request as
 * a TCD and enables scatter/gather feature to process it in the next time.
 * It is used for the case:
 * 1. for the single transfer, application doesn't need to allocate descriptor table, the head descriptor can be used
 for it.
 * @code
    DMA_CreateHandle(handle, base, channel)
    DMA_PrepareChannelTransfer(config,srcStartAddr,dstStartAddr,xferCfg,type,trigger,NULL);
    DMA_SubmitChannelTransfer(handle, config)
    DMA_StartTransfer(handle)
 * @endcode
 *
 * 2. for the linked transfer, application should responsible for link descriptor, for example, if 4 transfer is
 required, then application should prepare
 *  three descriptor table with macro , the head descriptor in driver can be used for the first transfer descriptor.
 * @code
    define link descriptor table in application with macro
    DMA_ALLOCATE_LINK_DESCRIPTOR(nextDesc);
    DMA_SetupDescriptor(nextDesc0,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, nextDesc1);
    DMA_SetupDescriptor(nextDesc1,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, nextDesc2);
    DMA_SetupDescriptor(nextDesc2,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, NULL);
    DMA_CreateHandle(handle, base, channel)
    DMA_PrepareChannelTransfer(config,srcStartAddr,dstStartAddr,xferCfg,type,trigger,nextDesc0);
    DMA_SubmitChannelTransfer(handle, config)
    DMA_StartTransfer(handle)
 * @endcode
 *
 * 3. for the ping pong case, application should responsible for link descriptor, for example, application should
 prepare
 *  two descriptor table with macro , the head descriptor in driver can be used for the first transfer descriptor.
 * @code
    define link descriptor table in application with macro
    DMA_ALLOCATE_LINK_DESCRIPTOR(nextDesc);

    DMA_SetupDescriptor(nextDesc0,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, nextDesc1);
    DMA_SetupDescriptor(nextDesc1,  DMA_CHANNEL_XFER(reload, clrTrig, intA, intB, width, srcInc, dstInc, bytes),
 srcStartAddr, dstStartAddr, nextDesc0);
    DMA_CreateHandle(handle, base, channel)
    DMA_PrepareChannelTransfer(config,srcStartAddr,dstStartAddr,xferCfg,type,trigger,nextDesc0);
    DMA_SubmitChannelTransfer(handle, config)
    DMA_StartTransfer(handle)
 * @endcode
 * @param handle DMA handle pointer.
 * @param config Pointer to DMA transfer configuration structure.
 * @retval kStatus_DMA_Success It means submit transfer request succeed.
 * @retval kStatus_DMA_QueueFull It means TCD queue is full. Submit transfer request is not allowed.
 * @retval kStatus_DMA_Busy It means the given channel is busy, need to submit request later.
 */
status_t DMA_SubmitChannelTransfer(dma_handle_t *handle, dma_channel_config_t *config);

/*!
 * @brief DMA start transfer.
 *
 * This function enables the channel request. User can call this function after submitting the transfer request
 * It will trigger transfer start with software trigger only when hardware trigger is not used.
 *
 * @param handle DMA handle pointer.
 */
void DMA_StartTransfer(dma_handle_t *handle);

/*!
 * @brief DMA IRQ handler for descriptor transfer complete.
 *
 * This function clears the channel major interrupt flag and call
 * the callback function if it is not NULL.
 *
 * @param base DMA base address.
 */
void DMA_IRQHandle(DMA_Type *base);

/*! @} */

#if defined(__cplusplus)
}
#endif /* __cplusplus */

/*! @} */

#endif /*FSL_DMA_H_*/