MCUXpresso_LPC55S69/boards/lpcxpresso55s69/azure_rtos_examples/filex_ram_disk/cm33_core0
Yilin Sun 6e8d03ec0a Updated to SDK v2.15.000
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-04-12 21:21:49 +08:00
..
armgcc Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00
board.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
board.h Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
clock_config.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
clock_config.h Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
filex_ram_disk.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
filex_ram_disk_v3_14.xml Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00
fx_user.h Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00
pin_mux.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
pin_mux.h Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
readme.md Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00
tx_user.h Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00

readme.md

Overview

This is a small demo of the high-performance FileX FAT file system. It includes setup for a small 34KB RAM disk and a loop that writes and reads a small file.

SDK version

  • Version: 2.15.000

Toolchain supported

  • IAR embedded Workbench 9.40.1
  • Keil MDK 5.38.1
  • GCC ARM Embedded 12.2
  • MCUXpresso 11.8.0

Hardware requirements

  • One Micro USB cables
  • Target Board
  • Personal Computer(PC)

Board settings

No special settings are required.

Prepare the Demo

  1. Connect a USB Micro cable between the host PC and the Debug Link USB port (P6) on the target board.
  2. Open a serial terminal on PC with the following settings:
    • 115200 baud rate
    • 8 data bits
    • No parity
    • One stop bit
    • No flow control
  3. Compile the demo.
  4. Download the program to the target board.
  5. Press the on-board RESET button to start the demo.

Running the demo

After writing the program to the flash of the target board, press the reset button on your board to start the demo.

Example output: FILEX example..... Open RAM Disk..... Creat TEST.TXT..... Write TEST.TXT..... Close TEST.TXT..... Close RAM Disk.....