Embedded_SDK
/
MCUXpresso_LPC55S69
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
MCUXpresso_LPC55S69/boards/lpcxpresso55s69/azure_rtos_examples/spi_example/cm33_core0
History
Yilin Sun 6e8d03ec0a Updated to SDK v2.15.000 
Signed-off-by: Yilin Sun <imi415@imi.moe>
 		2024-04-12 21:21:49 +08:00
..
armgcc Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00
board.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
board.h Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
board_setup.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
board_setup.h Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
clock_config.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
clock_config.h Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
pin_mux.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
pin_mux.h Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
readme.md Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00
spi_example.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
spi_example_v3_14.xml Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00
tx_spi.h Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
tx_spi_master.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
tx_spi_slave.c Stock SDK v2.11.0 2022-04-08 22:42:47 +08:00
tx_user.h Updated to SDK v2.15.000 2024-04-12 21:21:49 +08:00

readme.md

Overview

The example shows how to use SPI driver with Azure RTOS. In this example, one SPI instance used as master and another SPI instance used as slave.

Before running the example, need to connect the master SPI to the slave SPI by a cable.

SDK version

  • Version: 2.15.000

Toolchain supported

  • IAR embedded Workbench 9.40.1
  • Keil MDK 5.38.1
  • GCC ARM Embedded 12.2
  • MCUXpresso 11.8.0

Hardware requirements

  • Micro USB cable
  • LPCXpresso55S69 board
  • Personal Computer
  • 4-pin flat cable

Board settings

Connect SPI7 pins to SPI2 pins:

    Master(SPI7)		           Slave(SPI2)
Pin Name   Board Location     Pin Name   Board Location
MISO       P17  pin 12         MISO      P18  pin 6
MOSI       P17  pin 10         MOSI      P18  pin 10
SCK        P17  pin 14         SCK       P18  pin 8
SSEL1      P17  pin 1          SSEL0     P17  pin 16

Prepare the Demo

Note: MCUXpresso IDE project default debug console is semihost

  1. Connect a micro USB cable between the PC host and the CMSIS DAP USB port (P6) on the board
  2. Open a serial terminal with the following settings (See Appendix A in Getting started guide for description how to determine serial port number):
    • 115200 baud rate
    • 8 data bits
    • No parity
    • One stop bit
    • No flow control
  3. Download the program to the target board.
  4. Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.

Running the demo

When the example runs successfully, the console will output as below.

Start the SPI example

Master transmited: 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07
0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f
0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x1e 0x1f

Slave received: 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07
0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f
0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x1e 0x1f

Slave transmited: 0xff 0xfe 0xfd 0xfc 0xfb 0xfa 0xf9 0xf8
0xf7 0xf6 0xf5 0xf4 0xf3 0xf2 0xf1 0xf0
0xef 0xee 0xed 0xec 0xeb 0xea 0xe9 0xe8
0xe7 0xe6 0xe5 0xe4 0xe3 0xe2 0xe1 0xe0

Master received: 0xff 0xfe 0xfd 0xfc 0xfb 0xfa 0xf9 0xf8
0xf7 0xf6 0xf5 0xf4 0xf3 0xf2 0xf1 0xf0
0xef 0xee 0xed 0xec 0xeb 0xea 0xe9 0xe8
0xe7 0xe6 0xe5 0xe4 0xe3 0xe2 0xe1 0xe0

Master-to-slave data verified ok. Slave-to-master data verified ok.