Yilin Sun
6e8d03ec0a
Signed-off-by: Yilin Sun <imi415@imi.moe> |
||
---|---|---|
.. | ||
armgcc | ||
board.c | ||
board.h | ||
board_setup.c | ||
board_setup.h | ||
clock_config.c | ||
clock_config.h | ||
fx_user.h | ||
nx_user.h | ||
pin_mux.c | ||
pin_mux.h | ||
readme.md | ||
tx_user.h | ||
usb_device_config.h | ||
usbx_device_cdc_acm.c | ||
usbx_device_cdc_acm_v3_14.xml | ||
ux_user.h |
readme.md
Overview
This example works as a USB CDC ACM device. It will appear as a USB serial device on PC.
SDK version
- Version: 2.15.000
Toolchain supported
- IAR embedded Workbench 9.40.1
- Keil MDK 5.38.1
- GCC ARM Embedded 12.2
- MCUXpresso 11.8.0
Hardware requirements
- Two Micro USB cables
- Target Board
- Personal Computer(PC)
Board settings
This example can work with the USB high speed port (P9) or the USB full speed port (P10).
Prepare the Demo
- Connect a USB Micro cable between the host PC and the Debug Link USB port (P6) on the target board.
- High speed: Connect a USB Micro cable between the host PC and the on-board USB high speed port (P9). Full speed: Connect a USB Micro cable between the host PC and the on-board USB full speed port (P10).
- Open a serial terminal on PC with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- 1 stop bit
- No flow control
- Compile the demo:
- High speed: Set USB_DEVICE_CONFIG_LPCIP3511FS to 0 and USB_DEVICE_CONFIG_LPCIP3511HS to 1 in usb_device_config.h
- Full speed: Set USB_DEVICE_CONFIG_LPCIP3511FS to 1 and USB_DEVICE_CONFIG_LPCIP3511HS to 0 in usb_device_config.h
- Download the program to the target board.
- Press the on-board RESET button to start the demo. A new USB serial device will appear on PC.
- Open a serial terminal with the following settings for the new USB serial device.
- 115200 baud rate
- 8 data bits
- No parity
- 1 stop bit
- No flow control
Running the demo
When the demo is running, the serial port of the Debug Link will output:
Start USBX device CDC ACM example...
Then, connect a USB cable between PC and the USB device port of the board. A USB serial device will appear in the Device Manager of Windows. And the serial port will output:
CDC device activate
In another serial terminal, press any key, and it will display a string, for example:
fabcdef gabcdef 3abcdef