History

Yilin Sun 6e8d03ec0a Updated to SDK v2.15.000 Signed-off-by: Yilin Sun <imi415@imi.moe>		2024-04-12 21:21:49 +08:00
..
armgcc	Updated to SDK v2.15.000	2024-04-12 21:21:49 +08:00
board.c	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
board.h	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
clock_config.c	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
clock_config.h	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
led_blinky.bin	Updated to SDK v2.15.000	2024-04-12 21:21:49 +08:00
led_blinky.c	Release v2.12.0	2022-08-23 23:05:58 +08:00
led_blinky.mex	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
led_blinky_v3_14.xml	Updated to SDK v2.15.000	2024-04-12 21:21:49 +08:00
pin_mux.c	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
pin_mux.h	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
readme.md	Updated to SDK v2.15.000	2024-04-12 21:21:49 +08:00

readme.md

Overview

The LED Blinky demo application provides a sanity check for the new SDK build environments and board bring up. The LED Blinky demo uses the systick interrupt to realize the function of timing delay. The example takes turns to shine the LED. The purpose of this demo is to provide a simple project for debugging and further development. The code of this demo has been prepared and updated for use with the MCUXpresso Configuration Tools (Pins/Clocks/Peripherals).

SDK version

Version: 2.15.000

Toolchain supported

IAR embedded Workbench 9.40.1
Keil MDK 5.38.1
GCC ARM Embedded 12.2
MCUXpresso 11.8.0

Hardware requirements

Mini/micro USB cable
LPCXpresso55s69 board
Personal Computer

Board settings

No special settings are required.

Prepare the Demo

Note: MCUXpresso IDE project default debug console is semihost

Connect a micro USB cable between the PC host and the CMSIS DAP USB port (P6) on the board
Download the program to the target board.
Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.

Running the demo

When the demo runs successfully, you will find the LED is blinking.