History

Yilin Sun 6e8d03ec0a Updated to SDK v2.15.000 Signed-off-by: Yilin Sun <imi415@imi.moe>		2024-04-12 21:21:49 +08:00
..
armgcc	Updated to SDK v2.15.000	2024-04-12 21:21:49 +08:00
board.c	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
board.h	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
clock_config.c	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
clock_config.h	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
hashcrypt.c	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
hashcrypt_v3_14.xml	Updated to SDK v2.15.000	2024-04-12 21:21:49 +08:00
pin_mux.c	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
pin_mux.h	Stock SDK v2.11.0	2022-04-08 22:42:47 +08:00
readme.md	Updated to SDK v2.15.000	2024-04-12 21:21:49 +08:00

readme.md

Overview

The Hashcrypt Example project is a demonstration program that uses the KSDK software to encrypt plain text and decrypt it back using AES and SHA algorithm. SHA-1, SHA-256, AES ECB and AES CBC modes are demonstrated.

SDK version

Version: 2.15.000

Toolchain supported

IAR embedded Workbench 9.40.1
Keil MDK 5.38.1
GCC ARM Embedded 12.2
MCUXpresso 11.8.0

Hardware requirements

Mini/micro USB cable
LPCXpresso55s69 board
Personal Computer

Board settings

No special settings are required.

Prepare the Demo

Note: MCUXpresso IDE project default debug console is semihost

Connect a micro USB cable between the PC host and the CMSIS DAP USB port (P6) on the board
Open a serial terminal with the following settings (See Appendix A in Getting started guide for description how to determine serial port number):
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
Download the program to the target board.
Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.

Running the demo

After the board is flashed the Tera Term will print message on terminal.

Example output:

AES ECB Test pass
AES CBC Test pass
AES CTR Test pass
SHA-1 Test pass
SHA-256 Test pass