45 lines
2.0 KiB
Plaintext
45 lines
2.0 KiB
Plaintext
Hardware requirements
|
|
=====================
|
|
- Mini/micro USB cable
|
|
- Target microcontroller board
|
|
- Personal Computer
|
|
- FreeMASTER 2.5 or later installed on PC
|
|
|
|
Board settings
|
|
==============
|
|
No special settings are required. The demo communicates by uploading and
|
|
downloading communication frames directly to/from the microcontroller
|
|
RAM buffer using the Debug USB port. Standard debugger must not be active
|
|
during the FreeMASTER communication.
|
|
|
|
Prepare the demo
|
|
===============
|
|
1. Connect a USB cable between the host PC and the Debug USB port on the target board.
|
|
2. Use one of the flash-based build targets.
|
|
3. Compile and download the program to the target microcontroller.
|
|
4. Run and resume application execution when debugger stops in the main() function.
|
|
|
|
Disconnect the debugger
|
|
=======================
|
|
5. Terminate the debugger session to release the JTAG interface for FreeMASTER use.
|
|
6. Reset the target board to make sure it runs after detaching the debugger.
|
|
|
|
Connect with FreeMASTER
|
|
=======================
|
|
7. Run FreeMASTER, use the Connection Wizard or open Project Options.
|
|
8. Select communication using the FreeMASTER Packet Driven BDM Communication (PD-BDM) plug-in.
|
|
9. Configure the PD-BDM plug-in:
|
|
- Use the same "underlying" BDM/JTAG interface as used in debugger (typically CMSIS-DAP).
|
|
- Configure this BDM/JTAG interface and test its connection.
|
|
- Specify or search for a RAM address of the "_pdbdm" communication buffer.
|
|
- Test connection and close the configuration dialog.
|
|
10. Start communication, FreeMASTER loads the initial TSA Active Content links in the Welcome page.
|
|
11. Click the "FreeMASTER Demonstration Project (embedded in device)" in the Welcome page.
|
|
12. The demo is now running, you should be able to watch variable values and graphs.
|
|
|
|
More information
|
|
================
|
|
Read more information about FreeMASTER tool at http://www.nxp.com/freemaster.
|
|
Feel free to ask questions and report issues at FreeMASTER's
|
|
community page at https://community.nxp.com/community/freemaster
|