32 lines
1.3 KiB
Plaintext
32 lines
1.3 KiB
Plaintext
Hardware requirements
|
|
=====================
|
|
- Mini/micro USB cable
|
|
- Target microcontroller board
|
|
- Personal Computer
|
|
- FreeMASTER 3.1.3 with Network plug-in updated for Segger RTT communication
|
|
|
|
Board settings
|
|
============
|
|
No special settings are required. By default this demo communicates over a SEGGER J-Link interface
|
|
of the debugger USB connection.
|
|
|
|
Prepare the demo
|
|
===============
|
|
1. Connect a USB cable between the host PC and the Debug USB port on the target board.
|
|
2. Compile and download the program to the target microcontroller.
|
|
3. Run and resume application execution when debugger stops in the main() function.
|
|
|
|
Connect with FreeMASTER
|
|
=======================
|
|
4. Run FreeMASTER, use the Connection Wizard or open Project Options.
|
|
5. Select network communication and configure the plug-in for RTT protocol.
|
|
6. Start communication, FreeMASTER loads the initial TSA Active Content links in the Welcome page.
|
|
7. Click the "FreeMASTER Demonstration Project (embedded in device)" in the Welcome page.
|
|
8. The demo is now running, you should be able to watch variable values and graphs.
|
|
|
|
More information
|
|
================
|
|
Read more information about FreeMASTER tool at http://www.nxp.com/freemaster.
|
|
Feel free to ask questions and report issues at FreeMASTER's
|
|
community page at https://community.nxp.com/community/freemaster
|