505 lines
32 KiB
C
505 lines
32 KiB
C
/*
|
|
* Copyright 2021 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
/***********************************************************************************************************************
|
|
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
|
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
|
**********************************************************************************************************************/
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!GlobalInfo
|
|
product: Pins v9.0
|
|
processor: LPC55S69
|
|
package_id: LPC55S69JBD100
|
|
mcu_data: ksdk2_0
|
|
processor_version: 9.0.0
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
#include "fsl_common.h"
|
|
#include "fsl_iocon.h"
|
|
#include "pin_mux.h"
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitBootPins
|
|
* Description : Calls initialization functions.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitBootPins(void)
|
|
{
|
|
BOARD_InitPins();
|
|
}
|
|
|
|
/* clang-format off */
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitPins:
|
|
- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '94', peripheral: FLEXCOMM0, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_30/FC0_TXD_SCL_MISO_WS/SD1_D3/CTIMER0_MAT0/SCT0_OUT9/SECURE_GPIO0_30, mode: inactive,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '92', peripheral: FLEXCOMM0, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_29/FC0_RXD_SDA_MOSI_DATA/SD1_D2/CTIMER2_MAT3/SCT0_OUT8/CMP0_OUT/PLU_OUT2/SECURE_GPIO0_29,
|
|
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '4', peripheral: FLEXCOMM4, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_20/FC7_RTS_SCL_SSEL1/CT_INP14/FC4_TXD_SCL_MISO_WS/PLU_OUT2, mode: pullUp, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '30', peripheral: FLEXCOMM4, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_21/FC7_CTS_SDA_SSEL0/CTIMER3_MAT2/FC4_RXD_SDA_MOSI_DATA/PLU_OUT3, mode: pullUp,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '91', peripheral: SYSCON, signal: MCLK, pin_signal: PIO1_31/MCLK/SD1_CLK/CTIMER0_MAT2/SCT0_OUT6/PLU_IN0, mode: inactive, slew_rate: standard, invert: disabled,
|
|
open_drain: disabled}
|
|
- {pin_num: '76', peripheral: FLEXCOMM7, signal: SCK, pin_signal: PIO0_21/FC3_RTS_SCL_SSEL1/UTICK_CAP3/CTIMER3_MAT3/SCT_GPI3/FC7_SCK/PLU_CLKIN/SECURE_GPIO0_21,
|
|
mode: pullUp, slew_rate: fast, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '74', peripheral: FLEXCOMM7, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO0_20/FC3_CTS_SDA_SSEL0/CTIMER1_MAT1/CT_INP15/SCT_GPI2/FC7_RXD_SDA_MOSI_DATA/HS_SPI_SSEL0/PLU_IN5/SECURE_GPIO0_20/FC4_TXD_SCL_MISO_WS,
|
|
mode: pullUp, slew_rate: fast, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '90', peripheral: FLEXCOMM7, signal: TXD_SCL_MISO_WS, pin_signal: PIO0_19/FC4_RTS_SCL_SSEL1/UTICK_CAP0/CTIMER0_MAT2/SCT0_OUT2/FC7_TXD_SCL_MISO_WS/PLU_IN4/SECURE_GPIO0_19,
|
|
mode: pullUp, slew_rate: fast, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '21', peripheral: FLEXCOMM6, signal: SCK, pin_signal: PIO0_10/FC6_SCK/CT_INP10/CTIMER2_MAT0/FC1_TXD_SCL_MISO_WS/SCT0_OUT2/SWO/SECURE_GPIO0_10/ADC0_1,
|
|
mode: pullUp, slew_rate: fast, invert: disabled, open_drain: disabled, asw: enabled}
|
|
- {pin_num: '2', peripheral: FLEXCOMM6, signal: RXD_SDA_MOSI_DATA, pin_signal: PIO1_13/FC6_RXD_SDA_MOSI_DATA/CT_INP6/USB0_OVERCURRENTN/USB0_FRAME/SD0_CARD_DET_N,
|
|
mode: pullUp, slew_rate: fast, invert: disabled, open_drain: disabled}
|
|
- {pin_num: '87', peripheral: FLEXCOMM6, signal: TXD_SCL_MISO_WS, pin_signal: PIO1_16/FC6_TXD_SCL_MISO_WS/CTIMER1_MAT3/SD0_CMD, mode: pullUp, slew_rate: fast, invert: disabled,
|
|
open_drain: disabled}
|
|
- {pin_num: '6', peripheral: SDIF, signal: SD0_CLK, pin_signal: PIO0_7/FC3_RTS_SCL_SSEL1/SD0_CLK/FC5_SCK/FC1_SCK/SECURE_GPIO0_7, mode: inactive, slew_rate: fast,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '26', peripheral: SDIF, signal: SD0_CMD, pin_signal: PIO0_8/FC3_SSEL3/SD0_CMD/FC5_RXD_SDA_MOSI_DATA/SWO/SECURE_GPIO0_8, mode: inactive, slew_rate: fast,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '55', peripheral: SDIF, signal: SD0_POW_EN, pin_signal: PIO0_9/FC3_SSEL2/SD0_POW_EN/FC5_TXD_SCL_MISO_WS/SECURE_GPIO0_9/ACMP0_B, mode: inactive, slew_rate: standard,
|
|
invert: disabled, open_drain: disabled, asw: enabled}
|
|
- {pin_num: '70', peripheral: SDIF, signal: 'SD0_D, 0', pin_signal: PIO0_24/FC0_RXD_SDA_MOSI_DATA/SD0_D0/CT_INP8/SCT_GPI0/SECURE_GPIO0_24, mode: inactive, slew_rate: fast,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '79', peripheral: SDIF, signal: 'SD0_D, 1', pin_signal: PIO0_25/FC0_TXD_SCL_MISO_WS/SD0_D1/CT_INP9/SCT_GPI1/SECURE_GPIO0_25, mode: inactive, slew_rate: fast,
|
|
invert: disabled, open_drain: disabled}
|
|
- {pin_num: '23', peripheral: SDIF, signal: 'SD0_D, 2', pin_signal: PIO0_31/FC0_CTS_SDA_SSEL0/SD0_D2/CTIMER0_MAT1/SCT0_OUT3/SECURE_GPIO0_31/ADC0_3, mode: inactive,
|
|
slew_rate: fast, invert: disabled, open_drain: disabled, asw: enabled}
|
|
- {pin_num: '11', peripheral: SDIF, signal: 'SD0_D, 3', pin_signal: PIO1_0/FC0_RTS_SCL_SSEL1/SD0_D3/CT_INP2/SCT_GPI4/PLU_OUT3/ADC0_11, mode: inactive, slew_rate: fast,
|
|
invert: disabled, open_drain: disabled, asw: enabled}
|
|
- {pin_num: '22', peripheral: SDIF, signal: SD0_WR_PRT, pin_signal: PIO0_15/FC6_CTS_SDA_SSEL0/UTICK_CAP2/CT_INP16/SCT0_OUT2/SD0_WR_PRT/SECURE_GPIO0_15/ADC0_2, mode: inactive,
|
|
slew_rate: standard, invert: disabled, open_drain: disabled, asw: enabled}
|
|
- {pin_num: '8', peripheral: SDIF, signal: SD0_CARD_DET, pin_signal: PIO0_17/FC4_SSEL2/SD0_CARD_DET_N/SCT_GPI7/SCT0_OUT0/SD0_CARD_INT_N/PLU_IN2/SECURE_GPIO0_17,
|
|
mode: inactive, slew_rate: standard, invert: disabled, open_drain: disabled}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
/* clang-format on */
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
/* Function assigned for the Cortex-M33 (Core #0) */
|
|
void BOARD_InitPins(void)
|
|
{
|
|
/* Enables the clock for the I/O controller.: Enable Clock. */
|
|
CLOCK_EnableClock(kCLOCK_Iocon);
|
|
|
|
const uint32_t port0_pin10_config = (/* Pin is configured as FC6_SCK */
|
|
IOCON_PIO_FUNC1 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled) */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT0 PIN10 (coords: 21) is configured as FC6_SCK */
|
|
IOCON_PinMuxSet(IOCON, 0U, 10U, port0_pin10_config);
|
|
|
|
const uint32_t port0_pin19_config = (/* Pin is configured as FC7_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC7 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN19 (coords: 90) is configured as FC7_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 0U, 19U, port0_pin19_config);
|
|
|
|
const uint32_t port0_pin20_config = (/* Pin is configured as FC7_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC7 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN20 (coords: 74) is configured as FC7_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 0U, 20U, port0_pin20_config);
|
|
|
|
const uint32_t port0_pin21_config = (/* Pin is configured as FC7_SCK */
|
|
IOCON_PIO_FUNC7 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN21 (coords: 76) is configured as FC7_SCK */
|
|
IOCON_PinMuxSet(IOCON, 0U, 21U, port0_pin21_config);
|
|
|
|
const uint32_t port0_pin29_config = (/* Pin is configured as FC0_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC1 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN29 (coords: 92) is configured as FC0_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 0U, 29U, port0_pin29_config);
|
|
|
|
const uint32_t port0_pin30_config = (/* Pin is configured as FC0_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC1 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN30 (coords: 94) is configured as FC0_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 0U, 30U, port0_pin30_config);
|
|
|
|
const uint32_t port1_pin13_config = (/* Pin is configured as FC6_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC2 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN13 (coords: 2) is configured as FC6_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 1U, 13U, port1_pin13_config);
|
|
|
|
const uint32_t port1_pin16_config = (/* Pin is configured as FC6_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC2 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN16 (coords: 87) is configured as FC6_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 1U, 16U, port1_pin16_config);
|
|
|
|
const uint32_t port1_pin20_config = (/* Pin is configured as FC4_TXD_SCL_MISO_WS */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN20 (coords: 4) is configured as FC4_TXD_SCL_MISO_WS */
|
|
IOCON_PinMuxSet(IOCON, 1U, 20U, port1_pin20_config);
|
|
|
|
const uint32_t port1_pin21_config = (/* Pin is configured as FC4_RXD_SDA_MOSI_DATA */
|
|
IOCON_PIO_FUNC5 |
|
|
/* Selects pull-up function */
|
|
IOCON_PIO_MODE_PULLUP |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN21 (coords: 30) is configured as FC4_RXD_SDA_MOSI_DATA */
|
|
IOCON_PinMuxSet(IOCON, 1U, 21U, port1_pin21_config);
|
|
|
|
const uint32_t port1_pin31_config = (/* Pin is configured as MCLK */
|
|
IOCON_PIO_FUNC1 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT1 PIN31 (coords: 91) is configured as MCLK */
|
|
IOCON_PinMuxSet(IOCON, 1U, 31U, port1_pin31_config);
|
|
|
|
if (Chip_GetVersion()==1)
|
|
{
|
|
const uint32_t port0_pin15_config = (/* Pin is configured as SD0_WR_PRT */
|
|
IOCON_PIO_FUNC5 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled) */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT0 PIN15 (coords: 22) is configured as SD0_WR_PRT */
|
|
IOCON_PinMuxSet(IOCON, 0U, 15U, port0_pin15_config);
|
|
}
|
|
else
|
|
{
|
|
const uint32_t port0_pin15_config = (/* Pin is configured as SD0_WR_PRT */
|
|
IOCON_PIO_FUNC5 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled), only for A0 version */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT0 PIN15 (coords: 22) is configured as SD0_WR_PRT */
|
|
IOCON_PinMuxSet(IOCON, 0U, 15U, port0_pin15_config);
|
|
}
|
|
|
|
const uint32_t port0_pin17_config = (/* Pin is configured as SD0_CARD_DET_N */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN17 (coords: 8) is configured as SD0_CARD_DET_N */
|
|
IOCON_PinMuxSet(IOCON, 0U, 17U, port0_pin17_config);
|
|
|
|
const uint32_t port0_pin24_config = (/* Pin is configured as SD0_D0 */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN24 (coords: 70) is configured as SD0_D0 */
|
|
IOCON_PinMuxSet(IOCON, 0U, 24U, port0_pin24_config);
|
|
|
|
const uint32_t port0_pin25_config = (/* Pin is configured as SD0_D1 */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN25 (coords: 79) is configured as SD0_D1 */
|
|
IOCON_PinMuxSet(IOCON, 0U, 25U, port0_pin25_config);
|
|
|
|
|
|
if (Chip_GetVersion()==1)
|
|
{
|
|
const uint32_t port0_pin31_config = (/* Pin is configured as SD0_D2 */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled) */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT0 PIN31 (coords: 23) is configured as SD0_D2 */
|
|
IOCON_PinMuxSet(IOCON, 0U, 31U, port0_pin31_config);
|
|
}
|
|
else
|
|
{
|
|
const uint32_t port0_pin31_config = (/* Pin is configured as SD0_D2 */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled), only for A0 version */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT0 PIN31 (coords: 23) is configured as SD0_D2 */
|
|
IOCON_PinMuxSet(IOCON, 0U, 31U, port0_pin31_config);
|
|
}
|
|
|
|
const uint32_t port0_pin7_config = (/* Pin is configured as SD0_CLK */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN7 (coords: 6) is configured as SD0_CLK */
|
|
IOCON_PinMuxSet(IOCON, 0U, 7U, port0_pin7_config);
|
|
|
|
const uint32_t port0_pin8_config = (/* Pin is configured as SD0_CMD */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI);
|
|
/* PORT0 PIN8 (coords: 26) is configured as SD0_CMD */
|
|
IOCON_PinMuxSet(IOCON, 0U, 8U, port0_pin8_config);
|
|
|
|
if (Chip_GetVersion()==1)
|
|
{
|
|
const uint32_t port0_pin9_config = (/* Pin is configured as SD0_POW_EN */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled) */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT0 PIN9 (coords: 55) is configured as SD0_POW_EN */
|
|
IOCON_PinMuxSet(IOCON, 0U, 9U, port0_pin9_config);
|
|
}
|
|
else
|
|
{
|
|
const uint32_t port0_pin9_config = (/* Pin is configured as SD0_POW_EN */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Standard mode, output slew rate control is enabled */
|
|
IOCON_PIO_SLEW_STANDARD |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled), only for A0 version */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT0 PIN9 (coords: 55) is configured as SD0_POW_EN */
|
|
IOCON_PinMuxSet(IOCON, 0U, 9U, port0_pin9_config);
|
|
}
|
|
|
|
if (Chip_GetVersion()==1)
|
|
{
|
|
const uint32_t port1_pin0_config = (/* Pin is configured as SD0_D3 */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled) */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT1 PIN0 (coords: 11) is configured as SD0_D3 */
|
|
IOCON_PinMuxSet(IOCON, 1U, 0U, port1_pin0_config);
|
|
}
|
|
else
|
|
{
|
|
const uint32_t port1_pin0_config = (/* Pin is configured as SD0_D3 */
|
|
IOCON_PIO_FUNC2 |
|
|
/* No addition pin function */
|
|
IOCON_PIO_MODE_INACT |
|
|
/* Fast mode, slew rate control is disabled */
|
|
IOCON_PIO_SLEW_FAST |
|
|
/* Input function is not inverted */
|
|
IOCON_PIO_INV_DI |
|
|
/* Enables digital function */
|
|
IOCON_PIO_DIGITAL_EN |
|
|
/* Open drain is disabled */
|
|
IOCON_PIO_OPENDRAIN_DI |
|
|
/* Analog switch is closed (enabled), only for A0 version */
|
|
IOCON_PIO_ASW_EN);
|
|
/* PORT1 PIN0 (coords: 11) is configured as SD0_D3 */
|
|
IOCON_PinMuxSet(IOCON, 1U, 0U, port1_pin0_config);
|
|
}
|
|
}
|
|
/***********************************************************************************************************************
|
|
* EOF
|
|
**********************************************************************************************************************/
|