57 lines
1.4 KiB
Plaintext
57 lines
1.4 KiB
Plaintext
Overview
|
|
========
|
|
The example shows how to use FileX and LevelX with SPI flash.
|
|
|
|
This example will erase the SPI flash and format it in FAT format.
|
|
Then, do some file operation test - create, write, read, close and so on.
|
|
|
|
|
|
Toolchain supported
|
|
===================
|
|
- IAR embedded Workbench 9.20.2
|
|
- Keil MDK 5.36
|
|
- GCC ARM Embedded 10.3.1
|
|
- MCUXpresso 11.5.0
|
|
|
|
Hardware requirements
|
|
=====================
|
|
- Micro USB cable
|
|
- Target Board
|
|
- Personal Computer
|
|
- One Flash 3 Click (a mikroBUS add-on board)
|
|
|
|
Board settings
|
|
==============
|
|
Install the Flash 3 Click board on the mikroBUS socket.
|
|
|
|
Prepare the Demo
|
|
================
|
|
1. Connect a USB Micro cable between the host PC and the Debug Link USB port (P6) on the target board.
|
|
2. Open a serial terminal on PC with the following settings:
|
|
- 115200 baud rate
|
|
- 8 data bits
|
|
- No parity
|
|
- One stop bit
|
|
- No flow control
|
|
3. Compile the demo.
|
|
4. Download the program to the target board.
|
|
5. Press the on-board RESET button to start the demo.
|
|
|
|
Running the demo
|
|
================
|
|
When the example runs successfully, the console will output like:
|
|
|
|
Start FileX LevelX SPI Flash example
|
|
Erase Flash: offset = 0x0, size = 512 KB
|
|
................................................................................................................................
|
|
Fromat: disk_size = 480 KB
|
|
|
|
Creat TEST.TXT
|
|
Open TEST.TXT
|
|
Write TEST.TXT
|
|
Read TEST.TXT
|
|
Close TEST.TXT
|
|
|
|
Continue the test (y/n):
|
|
|