Overview
========
The I2C example shows an application using Azure RTOS threads with the I2C driver:
Two I2C instances of a single board are used. One I2C instance is used as
I2C master and another I2C instance is used as I2C slave.
Two threads are created. The first thread is associated with I2C master operation
and the second thread deals with I2C slave operation.
Toolchain supported
===================
- IAR embedded Workbench 9.20.2
- Keil MDK 5.36
- GCC ARM Embedded 10.3.1
- MCUXpresso 11.5.0
Hardware requirements
=====================
- Micro USB cable
- LPCXpresso55S69 board
- Personal Computer
Board settings
==============
To make i2c example work, connections needed to be as follows:
I2C1 connected to I2C4
SCL P0_14(P19 pin11) --> P1_21(P17 pin1)
SDA P0_13(P19 pin9) --> P1_20(P17 pin3)
Prepare the Demo
================
1. Connect a micro USB cable between the PC host and the LPC-Link USB port (P6) on the board.
2. Open a serial terminal with the following settings
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
3. Download the program to the target board.
4. Either press the reset button on your board or launch the debugger in your IDE to
begin running the demo.
Running the demo
================
When the example runs successfully, the output is:
Start i2c_example
Master will send data:
0x 0 0x 1 0x 2 0x 3 0x 4 0x 5 0x 6 0x 7
0x 8 0x 9 0x a 0x b 0x c 0x d 0x e 0x f
0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x1e 0x1f
Slave received data:
0x 0 0x 1 0x 2 0x 3 0x 4 0x 5 0x 6 0x 7
0x 8 0x 9 0x a 0x b 0x c 0x d 0x e 0x f
0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x1e 0x1f
OK. Data is matched.
imi415
864dc66c9e
