Overview
========
This is a small demo of the high-performance ThreadX kernel. It includes
examples of eight threads of different priorities, using a message queue,
semaphore, mutex, event flags group, byte pool, and block pool. Please
refer to Chapter 6 of the ThreadX User Guide for a complete description
of this demonstration.
Toolchain supported
===================
- IAR embedded Workbench 9.20.2
- Keil MDK 5.36
- GCC ARM Embedded 10.3.1
- MCUXpresso 11.5.0
Hardware requirements
=====================
- One Micro USB cables
- Target Board
- Personal Computer(PC)
Board settings
==============
No special settings are required.
Prepare the Demo
================
1. Connect a USB Micro cable between the host PC and the Debug Link USB port (P6) on the target board.
2. Open a serial terminal on PC with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
3. Compile the demo.
4. Download the program to the target board.
5. Press the on-board RESET button to start the demo.
Running the demo
================
After writing the program to the flash of the target board,
press the reset button on your board to start the demo.
Example output:
THREADX example ...
start thread 0 ...
start thread 5 ...
start thread 3 ...
start thread 4 ...
start thread 6 ...
start thread 7 ...
start thread 1 ...
start thread 2 ...
imi415
864dc66c9e
