Overview
========
This example works as a USB HID device. It will appear as a USB keyboard device on PC.
Toolchain supported
===================
- IAR embedded Workbench 9.20.2
- Keil MDK 5.36
- GCC ARM Embedded 10.3.1
- MCUXpresso 11.5.0
Hardware requirements
=====================
- Two Micro USB cables
- Target Board
- Personal Computer(PC)
Board settings
==============
This example only work with the USB high speed port (P9).
Prepare the Demo
================
1. Connect a USB Micro cable between the host PC and the Debug Link USB port (P6) on the target board.
2. Connect a USB Micro cable between the host PC and the on-board USB high speed port (P9).
3. Open a serial terminal on PC with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- 1 stop bit
- No flow control
4. Compile the demo.
5. Download the program to the target board.
6. Press the on-board RESET button to start the demo.
Running the demo
================
After writing the program to the flash of the target board,
press the reset button on your board to start the demo.
The serial port will output:
USBX device HID Keyboard example
Then, connect a USB cable between PC and the USB device port
of the board. A HID-compliant keyboard will appear in the
Device Manager of Windows and send a key every 2 secondes.
The serial port will output:
HID device activate
imi415
864dc66c9e
