35 lines
1.2 KiB
Plaintext
35 lines
1.2 KiB
Plaintext
Overview
|
|
========
|
|
The LED Blinky demo application provides a sanity check for the new SDK build environments and board bring up. The LED Blinky demo
|
|
uses the systick interrupt to realize the function of timing delay. The example takes turns to shine the LED. The purpose of this
|
|
demo is to provide a simple project for debugging and further development.
|
|
The code of this demo has been prepared and updated for use with the MCUXpresso Configuration Tools (Pins/Clocks/Peripherals).
|
|
|
|
Toolchain supported
|
|
===================
|
|
- IAR embedded Workbench 9.20.2
|
|
- Keil MDK 5.36
|
|
- GCC ARM Embedded 10.3.1
|
|
- MCUXpresso 11.5.0
|
|
|
|
Hardware requirements
|
|
=====================
|
|
- Mini/micro USB cable
|
|
- LPCXpresso55s69 board
|
|
- Personal Computer
|
|
|
|
Board settings
|
|
==============
|
|
No special settings are required.
|
|
|
|
Prepare the Demo
|
|
================
|
|
Note: MCUXpresso IDE project default debug console is semihost
|
|
1. Connect a micro USB cable between the PC host and the CMSIS DAP USB port (P6) on the board
|
|
2. Download the program to the target board.
|
|
3. Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.
|
|
|
|
Running the demo
|
|
================
|
|
When the demo runs successfully, you will find the LED is blinking.
|