/*
 * Copyright 2020 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

/***********************************************************************************************************************
 * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
 * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
 **********************************************************************************************************************/

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v7.0
processor: MIMXRT1021xxxxx
package_id: MIMXRT1021DAG5A
mcu_data: ksdk2_0
processor_version: 7.0.1
board: MIMXRT1020-EVK
pin_labels:
- {pin_num: '105', pin_signal: GPIO_AD_B0_06, label: 'UART1_TXD/J17[6]', identifier: UART1_TXD;TX}
- {pin_num: '101', pin_signal: GPIO_AD_B0_07, label: 'UART1_RXD/J17[4]', identifier: UART1_RXD;RX_GPIO;RX}
power_domains: {NVCC_GPIO: '3.3'}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_gpio.h"
#include "pin_mux.h"

/* FUNCTION ************************************************************************************************************
 * 
 * Function Name : BOARD_InitBootPins
 * Description   : Calls initialization functions.
 * 
 * END ****************************************************************************************************************/
void BOARD_InitBootPins(void) {
}

/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
UART1_PollForActivity:
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'false'}
- pin_list:
  - {pin_num: '101', peripheral: GPIO1, signal: 'gpio_io, 07', pin_signal: GPIO_AD_B0_07, identifier: RX_GPIO, direction: INPUT, pull_up_down_config: Pull_Up_100K_Ohm}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : UART1_PollForActivity
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void UART1_PollForActivity(void) {

  /* GPIO configuration of RX_GPIO on GPIO_AD_B0_07 (pin 101) */
  gpio_pin_config_t RX_GPIO_config = {
      .direction = kGPIO_DigitalInput,
      .outputLogic = 0U,
      .interruptMode = kGPIO_NoIntmode
  };
  /* Initialize GPIO functionality on GPIO_AD_B0_07 (pin 101) */
  GPIO_PinInit(GPIO1, 7U, &RX_GPIO_config);
  IOMUXC_SetPinMux(
      IOMUXC_GPIO_AD_B0_07_GPIO1_IO07,        /* GPIO_AD_B0_07 is configured as GPIO1_IO07 */
      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
  IOMUXC_SetPinConfig(
      IOMUXC_GPIO_AD_B0_07_GPIO1_IO07,        /* GPIO_AD_B0_07 PAD functional properties : */
      0x90B0U);                               /* Slew Rate Field: Slow Slew Rate
                                                 Drive Strength Field: R0/6
                                                 Speed Field: medium(100MHz)
                                                 Open Drain Enable Field: Open Drain Disabled
                                                 Pull / Keep Enable Field: Pull/Keeper Enabled
                                                 Pull / Keep Select Field: Keeper
                                                 Pull Up / Down Config. Field: 100K Ohm Pull Up
                                                 Hyst. Enable Field: Hysteresis Disabled */
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
UART1_InitPins:
- options: {callFromInitBoot: 'false', prefix: UART1_, coreID: core0, enableClock: 'false'}
- pin_list:
  - {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07, identifier: RX, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_47K_Ohm}
  - {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06, identifier: TX, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_47K_Ohm}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : UART1_InitPins
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void UART1_InitPins(void) {
  IOMUXC_SetPinMux(
      IOMUXC_GPIO_AD_B0_06_LPUART1_TX,        /* GPIO_AD_B0_06 is configured as LPUART1_TX */
      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
  IOMUXC_SetPinMux(
      IOMUXC_GPIO_AD_B0_07_LPUART1_RX,        /* GPIO_AD_B0_07 is configured as LPUART1_RX */
      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
  IOMUXC_SetPinConfig(
      IOMUXC_GPIO_AD_B0_06_LPUART1_TX,        /* GPIO_AD_B0_06 PAD functional properties : */
      0x70B0U);                               /* Slew Rate Field: Slow Slew Rate
                                                 Drive Strength Field: R0/6
                                                 Speed Field: medium(100MHz)
                                                 Open Drain Enable Field: Open Drain Disabled
                                                 Pull / Keep Enable Field: Pull/Keeper Enabled
                                                 Pull / Keep Select Field: Pull
                                                 Pull Up / Down Config. Field: 47K Ohm Pull Up
                                                 Hyst. Enable Field: Hysteresis Disabled */
  IOMUXC_SetPinConfig(
      IOMUXC_GPIO_AD_B0_07_GPIO1_IO07,        /* GPIO_AD_B0_07 PAD functional properties : */
      0x70B0U);                               /* Slew Rate Field: Slow Slew Rate
                                                 Drive Strength Field: R0/6
                                                 Speed Field: medium(100MHz)
                                                 Open Drain Enable Field: Open Drain Disabled
                                                 Pull / Keep Enable Field: Pull/Keeper Enabled
                                                 Pull / Keep Select Field: Pull
                                                 Pull Up / Down Config. Field: 47K Ohm Pull Up
                                                 Hyst. Enable Field: Hysteresis Disabled */
}


/*
 * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
UART1_RestoreDefault:
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'false'}
- pin_list:
  - {pin_num: '101', peripheral: GPIO1, signal: 'gpio_io, 07', pin_signal: GPIO_AD_B0_07, pull_up_down_config: Pull_Down_100K_Ohm}
  - {pin_num: '105', peripheral: GPIO1, signal: 'gpio_io, 06', pin_signal: GPIO_AD_B0_06, pull_up_down_config: Pull_Down_100K_Ohm}
 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
 */

/* FUNCTION ************************************************************************************************************
 *
 * Function Name : UART1_RestoreDefault
 * Description   : Configures pin routing and optionally pin electrical features.
 *
 * END ****************************************************************************************************************/
void UART1_RestoreDefault(void) {
  IOMUXC_SetPinMux(
      IOMUXC_GPIO_AD_B0_06_GPIO1_IO06,        /* GPIO_AD_B0_06 is configured as GPIO1_IO06 */
      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
  IOMUXC_SetPinMux(
      IOMUXC_GPIO_AD_B0_07_GPIO1_IO07,        /* GPIO_AD_B0_07 is configured as GPIO1_IO07 */
      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
  IOMUXC_SetPinConfig(
      IOMUXC_GPIO_AD_B0_06_LPUART1_TX,        /* GPIO_AD_B0_06 PAD functional properties : */
      0x10B0U);                               /* Slew Rate Field: Slow Slew Rate
                                                 Drive Strength Field: R0/6
                                                 Speed Field: medium(100MHz)
                                                 Open Drain Enable Field: Open Drain Disabled
                                                 Pull / Keep Enable Field: Pull/Keeper Enabled
                                                 Pull / Keep Select Field: Keeper
                                                 Pull Up / Down Config. Field: 100K Ohm Pull Down
                                                 Hyst. Enable Field: Hysteresis Disabled */
  IOMUXC_SetPinConfig(
      IOMUXC_GPIO_AD_B0_07_GPIO1_IO07,        /* GPIO_AD_B0_07 PAD functional properties : */
      0x10B0U);                               /* Slew Rate Field: Slow Slew Rate
                                                 Drive Strength Field: R0/6
                                                 Speed Field: medium(100MHz)
                                                 Open Drain Enable Field: Open Drain Disabled
                                                 Pull / Keep Enable Field: Pull/Keeper Enabled
                                                 Pull / Keep Select Field: Keeper
                                                 Pull Up / Down Config. Field: 100K Ohm Pull Down
                                                 Hyst. Enable Field: Hysteresis Disabled */
}

/***********************************************************************************************************************
 * EOF
 **********************************************************************************************************************/