/* * Copyright 2018-2020 NXP * All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ /*********************************************************************************************************************** * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. **********************************************************************************************************************/ /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* !!GlobalInfo product: Pins v7.0 processor: MIMXRT1021xxxxx package_id: MIMXRT1021DAG5A mcu_data: ksdk2_0 processor_version: 0.7.10 * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ #include "fsl_common.h" #include "fsl_iomuxc.h" #include "pin_mux.h" /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitBootPins * Description : Calls initialization functions. * * END ****************************************************************************************************************/ void BOARD_InitBootPins(void) { BOARD_InitPins(); } /* * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* BOARD_InitPins: - options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'} - pin_list: - {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07, slew_rate: Slow, software_input_on: Disable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06, slew_rate: Slow, software_input_on: Disable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '98', peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_AD_B0_10, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '99', peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_AD_B0_09, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '97', peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_AD_B0_11, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '94', peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_AD_B0_14, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '93', peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_AD_B0_15, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '95', peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_AD_B0_13, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '100', peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_AD_B0_08, slew_rate: Fast, software_input_on: Enable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '96', peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_AD_B0_12, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '116', peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_40, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '115', peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_41, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_200, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '107', peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} - {pin_num: '84', peripheral: GPIO1, signal: 'gpio_io, 22', pin_signal: GPIO_AD_B1_06, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_5, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, hysteresis_enable: Disable} * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** */ /* FUNCTION ************************************************************************************************************ * * Function Name : BOARD_InitPins * Description : Configures pin routing and optionally pin electrical features. * * END ****************************************************************************************************************/ void BOARD_InitPins(void) { CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03U */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, /* GPIO_AD_B0_04 is configured as GPIO1_IO04 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_06_LPUART1_TX, /* GPIO_AD_B0_06 is configured as LPUART1_TX */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_07_LPUART1_RX, /* GPIO_AD_B0_07 is configured as LPUART1_RX */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_08_ENET_REF_CLK1, /* GPIO_AD_B0_08 is configured as ENET_REF_CLK1 */ 1U); /* Software Input On Field: Force input path of pad GPIO_AD_B0_08 */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_09_ENET_RDATA01, /* GPIO_AD_B0_09 is configured as ENET_RDATA01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_10_ENET_RDATA00, /* GPIO_AD_B0_10 is configured as ENET_RDATA00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_11_ENET_RX_EN, /* GPIO_AD_B0_11 is configured as ENET_RX_EN */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_12_ENET_RX_ER, /* GPIO_AD_B0_12 is configured as ENET_RX_ER */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_13_ENET_TX_EN, /* GPIO_AD_B0_13 is configured as ENET_TX_EN */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_14_ENET_TDATA00, /* GPIO_AD_B0_14 is configured as ENET_TDATA00 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B0_15_ENET_TDATA01, /* GPIO_AD_B0_15 is configured as ENET_TDATA01 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, /* GPIO_AD_B1_06 is configured as GPIO1_IO22 */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_40_ENET_MDIO, /* GPIO_EMC_40 is configured as ENET_MDIO */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinMux( IOMUXC_GPIO_EMC_41_ENET_MDC, /* GPIO_EMC_41 is configured as ENET_MDC */ 0U); /* Software Input On Field: Input Path is determined by functionality */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, /* GPIO_AD_B0_04 PAD functional properties : */ 0xB0A9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_06_LPUART1_TX, /* GPIO_AD_B0_06 PAD functional properties : */ 0x10B0U); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 100K Ohm Pull Down Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_07_LPUART1_RX, /* GPIO_AD_B0_07 PAD functional properties : */ 0x10B0U); /* Slew Rate Field: Slow Slew Rate Drive Strength Field: R0/6 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Keeper Pull Up / Down Config. Field: 100K Ohm Pull Down Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_08_ENET_REF_CLK1, /* GPIO_AD_B0_08 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_09_ENET_RDATA01, /* GPIO_AD_B0_09 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_10_ENET_RDATA00, /* GPIO_AD_B0_10 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_11_ENET_RX_EN, /* GPIO_AD_B0_11 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_12_ENET_RX_ER, /* GPIO_AD_B0_12 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_13_ENET_TX_EN, /* GPIO_AD_B0_13 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_14_ENET_TDATA00, /* GPIO_AD_B0_14 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B0_15_ENET_TDATA01, /* GPIO_AD_B0_15 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, /* GPIO_AD_B1_06 PAD functional properties : */ 0xB0A9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: medium(100MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_EMC_40_ENET_MDIO, /* GPIO_EMC_40 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ IOMUXC_SetPinConfig( IOMUXC_GPIO_EMC_41_ENET_MDC, /* GPIO_EMC_41 PAD functional properties : */ 0xB0E9U); /* Slew Rate Field: Fast Slew Rate Drive Strength Field: R0/5 Speed Field: max(200MHz) Open Drain Enable Field: Open Drain Disabled Pull / Keep Enable Field: Pull/Keeper Enabled Pull / Keep Select Field: Pull Pull Up / Down Config. Field: 100K Ohm Pull Up Hyst. Enable Field: Hysteresis Disabled */ } /*********************************************************************************************************************** * EOF **********************************************************************************************************************/