Embedded_SDK/MCUXpresso_MIMXRT1021xxxxx
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
MCUXpresso_MIMXRT1021xxxxx/boards/evkmimxrt1020/demo_apps/sai/pin_mux.c
imi415 d983b267f0
Initial SDK v2.12.0
2022-08-23 23:00:33 +08:00

147 lines
11 KiB
C
Raw Permalink Blame History

/*
* Copyright 2019-2020 ,2021 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v9.0
processor: MIMXRT1021xxxxx
package_id: MIMXRT1021DAG5A
mcu_data: ksdk2_0
processor_version: 9.0.1
board: MIMXRT1020-EVK
pin_labels:
- {pin_num: '92', pin_signal: GPIO_AD_B1_00, label: SAI1_MCLK, identifier: SAI1_MCLK}
- {pin_num: '91', pin_signal: GPIO_AD_B1_01, label: SAI1_TX_BCLK, identifier: SAI1_TX_BCLK}
- {pin_num: '90', pin_signal: GPIO_AD_B1_02, label: 'SAI1_TX_SYNC/J19[10]', identifier: SAI1_TX_SYNC}
- {pin_num: '89', pin_signal: GPIO_AD_B1_03, label: 'SAI1_TXD/J19[9]', identifier: SAI1_TXD}
- {pin_num: '87', pin_signal: GPIO_AD_B1_05, label: SAI1_RXD, identifier: SAI1_RXD}
- {pin_num: '83', pin_signal: GPIO_AD_B1_07, label: 'SD0_VSELECT/J19[1]', identifier: SD0_VSELECT}
- {pin_num: '75', pin_signal: GPIO_AD_B1_14, label: 'I2C1_SCL/U10[17]/J18[6]', identifier: I2C1_SCL}
- {pin_num: '74', pin_signal: GPIO_AD_B1_15, label: 'I2C1_SDA/U10[18]/J18[5]', identifier: I2C1_SDA}
- {pin_num: '27', pin_signal: GPIO_SD_B1_04, label: INT1_COMBO, identifier: INT1_COMBO}
power_domains: {NVCC_GPIO: '3.3'}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void) {
BOARD_InitPins();
}
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', prefix: BOARD_, coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07, slew_rate: Slow, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06, slew_rate: Slow, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '92', peripheral: SAI1, signal: sai_mclk, pin_signal: GPIO_AD_B1_00, slew_rate: Slow, software_input_on: Enable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '91', peripheral: SAI1, signal: sai_tx_bclk, pin_signal: GPIO_AD_B1_01, slew_rate: Slow, software_input_on: Enable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '90', peripheral: SAI1, signal: sai_tx_sync, pin_signal: GPIO_AD_B1_02, slew_rate: Slow, software_input_on: Enable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '89', peripheral: SAI1, signal: sai_tx_data0, pin_signal: GPIO_AD_B1_03, slew_rate: Slow, software_input_on: Enable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '87', peripheral: SAI1, signal: sai_rx_data0, pin_signal: GPIO_AD_B1_05, slew_rate: Slow, software_input_on: Enable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '75', peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_14, slew_rate: Slow, software_input_on: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6,
pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_22K_Ohm, hysteresis_enable: Disable}
- {pin_num: '74', peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_15, slew_rate: Slow, software_input_on: Enable, open_drain: Enable, drive_strength: R0_6,
pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_22K_Ohm, hysteresis_enable: Disable}
- {pin_num: '27', peripheral: GPIO3, signal: 'gpio_io, 24', pin_signal: GPIO_SD_B1_04, slew_rate: Slow, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_6, pull_keeper_select: Keeper, pull_keeper_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, hysteresis_enable: Disable}
- {pin_num: '41', peripheral: GPIO3, signal: 'gpio_io, 19', pin_signal: GPIO_SD_B0_06, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_47K_Ohm, hysteresis_enable: Enable}
- {pin_num: '83', peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_AD_B1_07, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0_4, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_47K_Ohm, hysteresis_enable: Enable}
- {pin_num: '46', peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_02, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_47K_Ohm, hysteresis_enable: Enable}
- {pin_num: '45', peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_03, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0, pull_keeper_select: Keeper, pull_keeper_enable: Disable, pull_up_down_config: Pull_Up_47K_Ohm, hysteresis_enable: Enable}
- {pin_num: '43', peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_04, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_47K_Ohm, hysteresis_enable: Enable}
- {pin_num: '42', peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_05, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_47K_Ohm, hysteresis_enable: Enable}
- {pin_num: '48', peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_00, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_47K_Ohm, hysteresis_enable: Enable}
- {pin_num: '47', peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_01, slew_rate: Fast, software_input_on: Disable, open_drain: Disable, speed: MHZ_100,
drive_strength: R0, pull_keeper_select: Pull, pull_keeper_enable: Enable, pull_up_down_config: Pull_Up_47K_Ohm, hysteresis_enable: Enable}
- {pin_num: '97', peripheral: ARM, signal: arm_trace_swo, pin_signal: GPIO_AD_B0_11, slew_rate: Slow}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitPins(void) {
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_11_ARM_CM7_TRACE_SWO, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_SAI1_MCLK, 1U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_SAI1_TX_BCLK, 1U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_02_SAI1_TX_SYNC, 1U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_03_SAI1_TX_DATA00, 1U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_SAI1_RX_DATA00, 1U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_USDHC1_VSELECT, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_LPI2C1_SCL, 1U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_LPI2C1_SDA, 1U);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_CMD, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_CLK, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_06_GPIO3_IO19, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_04_GPIO3_IO24, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_11_ARM_CM7_TRACE_SWO, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_SAI1_MCLK, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_SAI1_TX_BCLK, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_02_SAI1_TX_SYNC, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_03_SAI1_TX_DATA00, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_05_SAI1_RX_DATA00, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_07_USDHC1_VSELECT, 0x0170A1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_14_LPI2C1_SCL, 0xD8B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_15_LPI2C1_SDA, 0xD8B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2, 0x017089U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3, 0x017089U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_02_USDHC1_CMD, 0x017089U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_03_USDHC1_CLK, 0x014089U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0, 0x017089U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1, 0x017089U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B0_06_GPIO3_IO19, 0x017089U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_B1_04_GPIO3_IO24, 0x10B0U);
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/
Reference in New Issue View Git Blame Copy Permalink