600 lines
39 KiB
C
600 lines
39 KiB
C
/*
|
|
* Copyright 2018 NXP.
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
/***********************************************************************************************************************
|
|
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
|
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
|
**********************************************************************************************************************/
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
!!GlobalInfo
|
|
product: Pins v4.1
|
|
processor: MIMXRT1021xxxxx
|
|
package_id: MIMXRT1021DAG5A
|
|
mcu_data: ksdk2_0
|
|
processor_version: 4.0.0
|
|
board: MIMXRT1020-EVK
|
|
pin_labels:
|
|
- {pin_num: '49', pin_signal: ONOFF, label: ONOFF}
|
|
- {pin_num: '53', pin_signal: PMIC_ON_REQ, label: PMIC_ON_REQ}
|
|
- {pin_num: '51', pin_signal: TEST_MODE, label: GND}
|
|
- {pin_num: '63', pin_signal: USB_OTG1_DP, label: OTG1_DP}
|
|
- {pin_num: '62', pin_signal: USB_OTG1_DN, label: OTG1_DN}
|
|
- {pin_num: '6', pin_signal: VSS0, label: GND}
|
|
- {pin_num: '40', pin_signal: VSS1, label: GND}
|
|
- {pin_num: '60', pin_signal: VSS2, label: GND}
|
|
- {pin_num: '70', pin_signal: VSS3, label: GND}
|
|
- {pin_num: '85', pin_signal: VSS4, label: GND}
|
|
- {pin_num: '103', pin_signal: VSS5, label: GND}
|
|
- {pin_num: '113', pin_signal: VSS6, label: GND}
|
|
- {pin_num: '135', pin_signal: VSS7, label: GND}
|
|
- {pin_num: '14', pin_signal: GPIO_EMC_04, label: 'SEMC_D4/U14[8]', identifier: SEMC_D4}
|
|
- {pin_num: '5', pin_signal: VDD_SOC_IN0, label: VDD_SOC_IN}
|
|
- {pin_num: '31', pin_signal: VDD_SOC_IN1, label: VDD_SOC_IN}
|
|
- {pin_num: '39', pin_signal: VDD_SOC_IN2, label: VDD_SOC_IN}
|
|
- {pin_num: '86', pin_signal: VDD_SOC_IN3, label: VDD_SOC_IN}
|
|
- {pin_num: '102', pin_signal: VDD_SOC_IN4, label: VDD_SOC_IN}
|
|
- {pin_num: '114', pin_signal: VDD_SOC_IN5, label: VDD_SOC_IN}
|
|
- {pin_num: '134', pin_signal: VDD_SOC_IN6, label: VDD_SOC_IN}
|
|
- {pin_num: '65', pin_signal: VDD_HIGH_CAP, label: VDDA_2P5_CAP}
|
|
- {pin_num: '56', pin_signal: VDD_SNVS_CAP, label: GND}
|
|
- {pin_num: '69', pin_signal: VDD_HIGH_IN, label: VDD_HIGH_IN_MCU}
|
|
- {pin_num: '55', pin_signal: VDD_SNVS_IN, label: VDD_SNVS_IN}
|
|
- {pin_num: '72', pin_signal: NVCC_PLL, label: VDDA_1P1_CAP}
|
|
- {pin_num: '11', pin_signal: NVCC_GPIO0, label: NVCC_GPIO_3V3}
|
|
- {pin_num: '20', pin_signal: NVCC_GPIO1, label: NVCC_GPIO_3V3}
|
|
- {pin_num: '29', pin_signal: NVCC_GPIO2, label: NVCC_GPIO_3V3}
|
|
- {pin_num: '144', pin_signal: NVCC_GPIO6, label: NVCC_GPIO_3V3}
|
|
- {pin_num: '59', pin_signal: USB_OTG1_VBUS, label: 5V_USB_OTG}
|
|
- {pin_num: '64', pin_signal: NGND_KEL0, label: GND}
|
|
- {pin_num: '73', pin_signal: VDDA_ADC_3P3, label: VDDA_ADC_3P3_MCU}
|
|
- {pin_num: '61', pin_signal: VDD_USB_CAP, label: VDD_USB_3V}
|
|
- {pin_num: '38', pin_signal: DCDC_IN_Q, label: MCU_DCDC_IN_3V3}
|
|
- {pin_num: '52', pin_signal: WAKEUP, label: USER_BUTTON}
|
|
- {pin_num: '34', pin_signal: DCDC_IN, label: MCU_DCDC_IN_3V3}
|
|
- {pin_num: '36', pin_signal: DCDC_LP, label: DCDC_OUT}
|
|
- {pin_num: '35', pin_signal: DCDC_GND, label: GND}
|
|
- {pin_num: '37', pin_signal: DCDC_PSWITCH, label: MCU_DCDC_IN_3V3}
|
|
- {pin_num: '54', pin_signal: PMIC_STBY_REQ, label: SD_PWREN}
|
|
- {pin_num: '44', pin_signal: NVCC_SD0, label: NVCC_SD}
|
|
- {pin_num: '18', pin_signal: GPIO_EMC_00, label: 'SEMC_D0/U14[2]', identifier: SEMC_D0}
|
|
- {pin_num: '17', pin_signal: GPIO_EMC_01, label: 'SEMC_D1/U14[4]', identifier: SEMC_D1}
|
|
- {pin_num: '16', pin_signal: GPIO_EMC_02, label: 'SEMC_D2/U14[5]', identifier: SEMC_D2}
|
|
- {pin_num: '15', pin_signal: GPIO_EMC_03, label: 'SEMC_D3/U14[7]', identifier: SEMC_D3}
|
|
- {pin_num: '13', pin_signal: GPIO_EMC_05, label: 'SEMC_D5/U14[10]', identifier: SEMC_D5}
|
|
- {pin_num: '12', pin_signal: GPIO_EMC_06, label: 'SEMC_D6/U14[11]', identifier: SEMC_D6}
|
|
- {pin_num: '10', pin_signal: GPIO_EMC_07, label: 'SEMC_D7/U14[13]', identifier: SEMC_D7}
|
|
- {pin_num: '9', pin_signal: GPIO_EMC_08, label: 'SEMC_DM0/U14[15]', identifier: SEMC_DM0}
|
|
- {pin_num: '8', pin_signal: GPIO_EMC_09, label: 'SEMC_WE/U14[16]', identifier: SEMC_WE}
|
|
- {pin_num: '7', pin_signal: GPIO_EMC_10, label: 'SEMC_CAS/U14[17]', identifier: SEMC_CAS}
|
|
- {pin_num: '4', pin_signal: GPIO_EMC_11, label: 'SEMC_RAS/U14[18]', identifier: SEMC_RAS}
|
|
- {pin_num: '3', pin_signal: GPIO_EMC_12, label: 'SEMC_CS0/U14[19]', identifier: SEMC_CS0}
|
|
- {pin_num: '2', pin_signal: GPIO_EMC_13, label: 'SEMC_BA0/U14[20]', identifier: SEMC_BA0}
|
|
- {pin_num: '1', pin_signal: GPIO_EMC_14, label: 'SEMC_BA1/U14[21]', identifier: SEMC_BA1}
|
|
- {pin_num: '143', pin_signal: GPIO_EMC_15, label: 'SEMC_A10/U14[22]', identifier: SEMC_A10}
|
|
- {pin_num: '142', pin_signal: GPIO_EMC_16, label: 'SEMC_A0/U14[23]/BOOT_MODE[0]', identifier: SEMC_A0}
|
|
- {pin_num: '141', pin_signal: GPIO_EMC_17, label: 'SEMC_A1/U14[24]/BOOT_MODE[1]', identifier: SEMC_A1}
|
|
- {pin_num: '140', pin_signal: GPIO_EMC_18, label: 'SEMC_A2/U14[25]/BT_CFG[0]', identifier: SEMC_A2}
|
|
- {pin_num: '139', pin_signal: GPIO_EMC_19, label: 'SEMC_A3/U14[26]/BT_CFG[1]', identifier: SEMC_A3}
|
|
- {pin_num: '138', pin_signal: GPIO_EMC_20, label: 'SEMC_A4/U14[29]/BT_CFG[2]', identifier: SEMC_A4}
|
|
- {pin_num: '137', pin_signal: GPIO_EMC_21, label: 'SEMC_A5/U14[30]/BT_CFG[3]', identifier: SEMC_A5}
|
|
- {pin_num: '136', pin_signal: GPIO_EMC_22, label: 'SEMC_A6/U14[31]/BT_CFG[4]', identifier: SEMC_A6}
|
|
- {pin_num: '133', pin_signal: GPIO_EMC_23, label: 'SEMC_A7/U14[32]/BT_CFG[5]', identifier: SEMC_A7}
|
|
- {pin_num: '132', pin_signal: GPIO_EMC_24, label: 'SEMC_A8/U14[33]/BT_CFG[6]', identifier: SEMC_A8}
|
|
- {pin_num: '131', pin_signal: GPIO_EMC_25, label: 'SEMC_A9/U14[34]/BT_CFG[7]', identifier: SEMC_A9}
|
|
- {pin_num: '130', pin_signal: GPIO_EMC_26, label: 'SEMC_A11/U14[35]/BT_CFG[8]', identifier: SEMC_A11}
|
|
- {pin_num: '129', pin_signal: GPIO_EMC_27, label: 'SEMC_A12/U14[36]/BT_CFG[9]', identifier: SEMC_A12}
|
|
- {pin_num: '128', pin_signal: GPIO_EMC_28, label: SEMC_DQS, identifier: SEMC_DQS}
|
|
- {pin_num: '127', pin_signal: GPIO_EMC_29, label: 'SEMC_CKE/U14[37]', identifier: SEMC_CKE}
|
|
- {pin_num: '126', pin_signal: GPIO_EMC_30, label: 'SEMC_CLK/U14[38]', identifier: SEMC_CLK}
|
|
- {pin_num: '125', pin_signal: GPIO_EMC_31, label: 'SEMC_DM1/U14[39]', identifier: SEMC_DM1}
|
|
- {pin_num: '124', pin_signal: GPIO_EMC_32, label: 'SEMC_D8/U14[42]', identifier: SEMC_D8}
|
|
- {pin_num: '123', pin_signal: GPIO_EMC_33, label: 'SEMC_D9/U14[44]', identifier: SEMC_D9}
|
|
- {pin_num: '122', pin_signal: GPIO_EMC_34, label: 'SEMC_D10/U14[45]', identifier: SEMC_D10}
|
|
- {pin_num: '121', pin_signal: GPIO_EMC_35, label: 'SEMC_D11/U14[47]', identifier: SEMC_D11}
|
|
- {pin_num: '120', pin_signal: GPIO_EMC_36, label: 'SEMC_D12/U14[48]', identifier: SEMC_D12}
|
|
- {pin_num: '119', pin_signal: GPIO_EMC_37, label: 'SEMC_D13/U14[50]', identifier: SEMC_D13}
|
|
- {pin_num: '118', pin_signal: GPIO_EMC_38, label: 'SEMC_D14/U14[51]', identifier: SEMC_D14}
|
|
- {pin_num: '117', pin_signal: GPIO_EMC_39, label: 'SEMC_D15/U14[53]', identifier: SEMC_D15}
|
|
- {pin_num: '116', pin_signal: GPIO_EMC_40, label: 'ENET_MDIO/U11[11]', identifier: ENET_MDIO}
|
|
- {pin_num: '115', pin_signal: GPIO_EMC_41, label: 'ENET_MDC/U11[12]', identifier: ENET_MDC}
|
|
- {pin_num: '112', pin_signal: NVCC_GPIO5, label: NVCC_GPIO_3V3}
|
|
- {pin_num: '104', pin_signal: NVCC_GPIO4, label: NVCC_GPIO_3V3}
|
|
- {pin_num: '77', pin_signal: NVCC_GPIO3, label: NVCC_GPIO_3V3}
|
|
- {pin_num: '111', pin_signal: GPIO_AD_B0_00, label: 'JTAG_TMS/J16[7]/SWD_DIO'}
|
|
- {pin_num: '110', pin_signal: GPIO_AD_B0_01, label: 'JTAG_TCK/J16[9]/SWD_CLK'}
|
|
- {pin_num: '109', pin_signal: GPIO_AD_B0_02, label: GND}
|
|
- {pin_num: '108', pin_signal: GPIO_AD_B0_03, label: 'JTAG_TDI/J16[5]/WDOG_B'}
|
|
- {pin_num: '107', pin_signal: GPIO_AD_B0_04, label: 'JTAG_TDO/J16[13]/ENET_RST/U11[32]', identifier: ENET_RST}
|
|
- {pin_num: '106', pin_signal: GPIO_AD_B0_05, label: 'JTAG_nTRST/J16[3]/USER_LED/J17[5]'}
|
|
- {pin_num: '105', pin_signal: GPIO_AD_B0_06, label: 'UART1_TXD/J17[6]', identifier: UART1_TXD}
|
|
- {pin_num: '101', pin_signal: GPIO_AD_B0_07, label: 'UART1_RXD/J17[4]', identifier: UART1_RXD}
|
|
- {pin_num: '100', pin_signal: GPIO_AD_B0_08, label: 'ENET_TX_CLK/U11[9]', identifier: ENET_TX_CLK}
|
|
- {pin_num: '99', pin_signal: GPIO_AD_B0_09, label: 'ENET_RXD1/U11[15]/J17[3]', identifier: ENET_RXD1}
|
|
- {pin_num: '98', pin_signal: GPIO_AD_B0_10, label: 'ENET_RXD0/U11[16]/J19[6]', identifier: ENET_RXD0}
|
|
- {pin_num: '97', pin_signal: GPIO_AD_B0_11, label: 'ENET_CRS_DV/U11[18]/J19[3]', identifier: ENET_CRS_DV}
|
|
- {pin_num: '96', pin_signal: GPIO_AD_B0_12, label: 'ENET_RXER/U11[20]/J19[4]', identifier: ENET_RXER}
|
|
- {pin_num: '95', pin_signal: GPIO_AD_B0_13, label: 'ENET_TXEN/U11[23]/J19[5]', identifier: ENET_TXEN}
|
|
- {pin_num: '94', pin_signal: GPIO_AD_B0_14, label: 'ENET_TXD0/U11[24]/J17[7]', identifier: ENET_TXD0}
|
|
- {pin_num: '93', pin_signal: GPIO_AD_B0_15, label: 'ENET_TXD1/U11[25]/J19[2]', identifier: ENET_TXD1}
|
|
- {pin_num: '92', pin_signal: GPIO_AD_B1_00, label: SAI1_MCLK}
|
|
- {pin_num: '91', pin_signal: GPIO_AD_B1_01, label: SAI1_TX_BCLK}
|
|
- {pin_num: '90', pin_signal: GPIO_AD_B1_02, label: 'SAI1_TX_SYNC/J19[10]'}
|
|
- {pin_num: '89', pin_signal: GPIO_AD_B1_03, label: 'SAI1_TXD/J19[9]'}
|
|
- {pin_num: '88', pin_signal: GPIO_AD_B1_04, label: AUD_INT}
|
|
- {pin_num: '87', pin_signal: GPIO_AD_B1_05, label: SAI1_RXD}
|
|
- {pin_num: '84', pin_signal: GPIO_AD_B1_06, label: 'ENET_INT/U11[21]/J17[8]', identifier: ENET_INT}
|
|
- {pin_num: '83', pin_signal: GPIO_AD_B1_07, label: 'SD0_VSELECT/J19[1]'}
|
|
- {pin_num: '80', pin_signal: GPIO_AD_B1_10, label: 'USB_OTG1_PWR/J18[1]'}
|
|
- {pin_num: '79', pin_signal: GPIO_AD_B1_11, label: 'USB_OTG1_ID/J18[2]'}
|
|
- {pin_num: '78', pin_signal: GPIO_AD_B1_12, label: 'USB_OTG1_OC/J18[3]'}
|
|
- {pin_num: '76', pin_signal: GPIO_AD_B1_13, label: 'CAN_STBY/J18[4]', identifier: CAN_STBY}
|
|
- {pin_num: '75', pin_signal: GPIO_AD_B1_14, label: 'I2C1_SCL/U10[17]/J18[6]'}
|
|
- {pin_num: '74', pin_signal: GPIO_AD_B1_15, label: 'I2C1_SDA/U10[18]/J18[5]'}
|
|
- {pin_num: '48', pin_signal: GPIO_SD_B0_00, label: 'SD1_D2/J15[1]', identifier: SD1_D2}
|
|
- {pin_num: '47', pin_signal: GPIO_SD_B0_01, label: 'SD1_D3/J15[2]', identifier: SD1_D3}
|
|
- {pin_num: '46', pin_signal: GPIO_SD_B0_02, label: 'SD1_CMD/J15[3]', identifier: SD1_CMD}
|
|
- {pin_num: '45', pin_signal: GPIO_SD_B0_03, label: 'SD1_CLK/J15[5]', identifier: SD1_CLK}
|
|
- {pin_num: '43', pin_signal: GPIO_SD_B0_04, label: 'SD1_D0/J15[7]', identifier: SD1_D0}
|
|
- {pin_num: '42', pin_signal: GPIO_SD_B0_05, label: 'SD1_D1/J15[8]', identifier: SD1_D1}
|
|
- {pin_num: '41', pin_signal: GPIO_SD_B0_06, label: 'SD_CD_SW/J15[9]', identifier: SD_CD_SW}
|
|
- {pin_num: '33', pin_signal: GPIO_SD_B1_00, label: 'CAN1_TX/U9[1]', identifier: CAN1_TX}
|
|
- {pin_num: '32', pin_signal: GPIO_SD_B1_01, label: 'CAN1_RX/U9[4]', identifier: CAN1_RX}
|
|
- {pin_num: '30', pin_signal: GPIO_SD_B1_02, label: I2C4_SCL}
|
|
- {pin_num: '25', pin_signal: GPIO_SD_B1_06, label: 'FlexSPI_D3_A/U13[7]', identifier: FlexSPI_D3_A}
|
|
- {pin_num: '26', pin_signal: GPIO_SD_B1_05, label: INT2_COMBO}
|
|
- {pin_num: '27', pin_signal: GPIO_SD_B1_04, label: INT1_COMBO}
|
|
- {pin_num: '28', pin_signal: GPIO_SD_B1_03, label: I2C4_SDA}
|
|
- {pin_num: '24', pin_signal: GPIO_SD_B1_07, label: 'FlexSPI_CLK/U13[6]', identifier: FlexSPI_CLK}
|
|
- {pin_num: '23', pin_signal: GPIO_SD_B1_08, label: 'FlexSPI_D0_A/U13[5]', identifier: FlexSPI_D0_A}
|
|
- {pin_num: '22', pin_signal: GPIO_SD_B1_09, label: 'FlexSPI_D2_A/U13[3]', identifier: FlexSPI_D2_A}
|
|
- {pin_num: '21', pin_signal: GPIO_SD_B1_10, label: 'FlexSPI_D1_A/U13[2]', identifier: FlexSPI_D1_A}
|
|
- {pin_num: '19', pin_signal: GPIO_SD_B1_11, label: 'FlexSPI_SS0/U13[1]', identifier: FlexSPI_SS0}
|
|
- {pin_num: '50', pin_signal: POR_B, label: 'POR_B/J16[5]/RST_TGTMCU_B/J20[3]'}
|
|
- {pin_num: '81', pin_signal: GPIO_AD_B1_09, label: 'UART_RX/J17[1]'}
|
|
- {pin_num: '82', pin_signal: GPIO_AD_B1_08, label: 'UART_TX/J17[2]'}
|
|
- {pin_num: '67', pin_signal: XTALI, label: XTALI}
|
|
- {pin_num: '68', pin_signal: XTALO, label: XTALO}
|
|
- {pin_num: '57', pin_signal: RTC_XTALI, label: RTC_XTALI}
|
|
- {pin_num: '58', pin_signal: RTC_XTALO, label: RTC_XTALO}
|
|
power_domains: {NVCC_GPIO: '3.3'}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
#include "fsl_common.h"
|
|
#include "fsl_iomuxc.h"
|
|
#include "pin_mux.h"
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitBootPins
|
|
* Description : Calls initialization functions.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitBootPins(void) {
|
|
BOARD_InitPins();
|
|
BOARD_InitDEBUG_UARTPins();
|
|
}
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitPins:
|
|
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
|
- pin_list: []
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitPins(void) {
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitDEBUG_UARTPins:
|
|
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07}
|
|
- {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitDEBUG_UARTPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitDEBUG_UARTPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_06_LPUART1_TX, /* GPIO_AD_B0_06 is configured as LPUART1_TX */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_07_LPUART1_RX, /* GPIO_AD_B0_07 is configured as LPUART1_RX */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitSDRAMPins:
|
|
- options: {coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '142', peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_16}
|
|
- {pin_num: '141', peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_17}
|
|
- {pin_num: '140', peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_18}
|
|
- {pin_num: '139', peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_19}
|
|
- {pin_num: '138', peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_20}
|
|
- {pin_num: '136', peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_22}
|
|
- {pin_num: '137', peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_21}
|
|
- {pin_num: '133', peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_23}
|
|
- {pin_num: '132', peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_24}
|
|
- {pin_num: '131', peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_25}
|
|
- {pin_num: '143', peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_15}
|
|
- {pin_num: '130', peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_26}
|
|
- {pin_num: '129', peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_27}
|
|
- {pin_num: '2', peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_13}
|
|
- {pin_num: '1', peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_14}
|
|
- {pin_num: '7', peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_10}
|
|
- {pin_num: '127', peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_29}
|
|
- {pin_num: '126', peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_30}
|
|
- {pin_num: '3', peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_12}
|
|
- {pin_num: '8', peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_09}
|
|
- {pin_num: '4', peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_11}
|
|
- {pin_num: '128', peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_28}
|
|
- {pin_num: '125', peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_31}
|
|
- {pin_num: '9', peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
|
|
- {pin_num: '117', peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_39}
|
|
- {pin_num: '118', peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_38}
|
|
- {pin_num: '119', peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_37}
|
|
- {pin_num: '120', peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_36}
|
|
- {pin_num: '122', peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_34}
|
|
- {pin_num: '121', peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_35}
|
|
- {pin_num: '123', peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_33}
|
|
- {pin_num: '124', peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_32}
|
|
- {pin_num: '10', peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
|
|
- {pin_num: '12', peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
|
|
- {pin_num: '13', peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
|
|
- {pin_num: '14', peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
|
|
- {pin_num: '15', peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
|
|
- {pin_num: '16', peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
|
|
- {pin_num: '17', peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
|
|
- {pin_num: '18', peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitSDRAMPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitSDRAMPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_00_SEMC_DATA00, /* GPIO_EMC_00 is configured as SEMC_DATA00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_01_SEMC_DATA01, /* GPIO_EMC_01 is configured as SEMC_DATA01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_02_SEMC_DATA02, /* GPIO_EMC_02 is configured as SEMC_DATA02 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_03_SEMC_DATA03, /* GPIO_EMC_03 is configured as SEMC_DATA03 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_04_SEMC_DATA04, /* GPIO_EMC_04 is configured as SEMC_DATA04 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_05_SEMC_DATA05, /* GPIO_EMC_05 is configured as SEMC_DATA05 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_06_SEMC_DATA06, /* GPIO_EMC_06 is configured as SEMC_DATA06 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_07_SEMC_DATA07, /* GPIO_EMC_07 is configured as SEMC_DATA07 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_08_SEMC_DM00, /* GPIO_EMC_08 is configured as SEMC_DM00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_09_SEMC_WE, /* GPIO_EMC_09 is configured as SEMC_WE */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_10_SEMC_CAS, /* GPIO_EMC_10 is configured as SEMC_CAS */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_11_SEMC_RAS, /* GPIO_EMC_11 is configured as SEMC_RAS */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_12_SEMC_CS0, /* GPIO_EMC_12 is configured as SEMC_CS0 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_13_SEMC_BA0, /* GPIO_EMC_13 is configured as SEMC_BA0 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_14_SEMC_BA1, /* GPIO_EMC_14 is configured as SEMC_BA1 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_15_SEMC_ADDR10, /* GPIO_EMC_15 is configured as SEMC_ADDR10 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_16_SEMC_ADDR00, /* GPIO_EMC_16 is configured as SEMC_ADDR00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_17_SEMC_ADDR01, /* GPIO_EMC_17 is configured as SEMC_ADDR01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_18_SEMC_ADDR02, /* GPIO_EMC_18 is configured as SEMC_ADDR02 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_19_SEMC_ADDR03, /* GPIO_EMC_19 is configured as SEMC_ADDR03 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_20_SEMC_ADDR04, /* GPIO_EMC_20 is configured as SEMC_ADDR04 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_21_SEMC_ADDR05, /* GPIO_EMC_21 is configured as SEMC_ADDR05 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_22_SEMC_ADDR06, /* GPIO_EMC_22 is configured as SEMC_ADDR06 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_23_SEMC_ADDR07, /* GPIO_EMC_23 is configured as SEMC_ADDR07 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_24_SEMC_ADDR08, /* GPIO_EMC_24 is configured as SEMC_ADDR08 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_25_SEMC_ADDR09, /* GPIO_EMC_25 is configured as SEMC_ADDR09 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_26_SEMC_ADDR11, /* GPIO_EMC_26 is configured as SEMC_ADDR11 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_27_SEMC_ADDR12, /* GPIO_EMC_27 is configured as SEMC_ADDR12 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_28_SEMC_DQS, /* GPIO_EMC_28 is configured as SEMC_DQS */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_29_SEMC_CKE, /* GPIO_EMC_29 is configured as SEMC_CKE */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_30_SEMC_CLK, /* GPIO_EMC_30 is configured as SEMC_CLK */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_31_SEMC_DM01, /* GPIO_EMC_31 is configured as SEMC_DM01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_32_SEMC_DATA08, /* GPIO_EMC_32 is configured as SEMC_DATA08 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_33_SEMC_DATA09, /* GPIO_EMC_33 is configured as SEMC_DATA09 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_34_SEMC_DATA10, /* GPIO_EMC_34 is configured as SEMC_DATA10 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_35_SEMC_DATA11, /* GPIO_EMC_35 is configured as SEMC_DATA11 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_36_SEMC_DATA12, /* GPIO_EMC_36 is configured as SEMC_DATA12 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_37_SEMC_DATA13, /* GPIO_EMC_37 is configured as SEMC_DATA13 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_38_SEMC_DATA14, /* GPIO_EMC_38 is configured as SEMC_DATA14 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_39_SEMC_DATA15, /* GPIO_EMC_39 is configured as SEMC_DATA15 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitCANPins:
|
|
- options: {coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '32', peripheral: CAN1, signal: RX, pin_signal: GPIO_SD_B1_01}
|
|
- {pin_num: '33', peripheral: CAN1, signal: TX, pin_signal: GPIO_SD_B1_00}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitCANPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitCANPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B1_00_FLEXCAN1_TX, /* GPIO_SD_B1_00 is configured as FLEXCAN1_TX */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B1_01_FLEXCAN1_RX, /* GPIO_SD_B1_01 is configured as FLEXCAN1_RX */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitENETPins:
|
|
- options: {coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '97', peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_AD_B0_11}
|
|
- {pin_num: '84', peripheral: GPIO1, signal: 'gpio_io, 22', pin_signal: GPIO_AD_B1_06}
|
|
- {pin_num: '107', peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
|
|
- {pin_num: '100', peripheral: ENET, signal: enet_tx_clk, pin_signal: GPIO_AD_B0_08}
|
|
- {pin_num: '95', peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_AD_B0_13}
|
|
- {pin_num: '93', peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_AD_B0_15}
|
|
- {pin_num: '94', peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_AD_B0_14}
|
|
- {pin_num: '96', peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_AD_B0_12}
|
|
- {pin_num: '99', peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_AD_B0_09}
|
|
- {pin_num: '98', peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_AD_B0_10}
|
|
- {pin_num: '116', peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_40}
|
|
- {pin_num: '115', peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_41}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitENETPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitENETPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, /* GPIO_AD_B0_04 is configured as GPIO1_IO04 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_08_ENET_TX_CLK, /* GPIO_AD_B0_08 is configured as ENET_TX_CLK */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_09_ENET_RDATA01, /* GPIO_AD_B0_09 is configured as ENET_RDATA01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_10_ENET_RDATA00, /* GPIO_AD_B0_10 is configured as ENET_RDATA00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_11_ENET_RX_EN, /* GPIO_AD_B0_11 is configured as ENET_RX_EN */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_12_ENET_RX_ER, /* GPIO_AD_B0_12 is configured as ENET_RX_ER */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_13_ENET_TX_EN, /* GPIO_AD_B0_13 is configured as ENET_TX_EN */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_14_ENET_TDATA00, /* GPIO_AD_B0_14 is configured as ENET_TDATA00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_15_ENET_TDATA01, /* GPIO_AD_B0_15 is configured as ENET_TDATA01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, /* GPIO_AD_B1_06 is configured as GPIO1_IO22 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_40_ENET_MDIO, /* GPIO_EMC_40 is configured as ENET_MDIO */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_41_ENET_MDC, /* GPIO_EMC_41 is configured as ENET_MDC */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitUSDHCPins:
|
|
- options: {coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '45', peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_03}
|
|
- {pin_num: '46', peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_02}
|
|
- {pin_num: '43', peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_04}
|
|
- {pin_num: '42', peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_05}
|
|
- {pin_num: '48', peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_00}
|
|
- {pin_num: '47', peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_01}
|
|
- {pin_num: '41', peripheral: GPIO3, signal: 'gpio_io, 19', pin_signal: GPIO_SD_B0_06}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitUSDHCPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitUSDHCPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2, /* GPIO_SD_B0_00 is configured as USDHC1_DATA2 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3, /* GPIO_SD_B0_01 is configured as USDHC1_DATA3 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B0_02_USDHC1_CMD, /* GPIO_SD_B0_02 is configured as USDHC1_CMD */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B0_03_USDHC1_CLK, /* GPIO_SD_B0_03 is configured as USDHC1_CLK */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0, /* GPIO_SD_B0_04 is configured as USDHC1_DATA0 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1, /* GPIO_SD_B0_05 is configured as USDHC1_DATA1 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B0_06_GPIO3_IO19, /* GPIO_SD_B0_06 is configured as GPIO3_IO19 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
}
|
|
|
|
|
|
/*
|
|
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
|
BOARD_InitQSPIPins:
|
|
- options: {coreID: core0, enableClock: 'true'}
|
|
- pin_list:
|
|
- {pin_num: '24', peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
|
|
- {pin_num: '23', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
|
|
- {pin_num: '21', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_10}
|
|
- {pin_num: '22', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_09}
|
|
- {pin_num: '25', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_06}
|
|
- {pin_num: '19', peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_11}
|
|
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
|
*/
|
|
|
|
/* FUNCTION ************************************************************************************************************
|
|
*
|
|
* Function Name : BOARD_InitQSPIPins
|
|
* Description : Configures pin routing and optionally pin electrical features.
|
|
*
|
|
* END ****************************************************************************************************************/
|
|
void BOARD_InitQSPIPins(void) {
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03, /* GPIO_SD_B1_06 is configured as FLEXSPI_A_DATA03 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, /* GPIO_SD_B1_07 is configured as FLEXSPI_A_SCLK */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, /* GPIO_SD_B1_08 is configured as FLEXSPI_A_DATA00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02, /* GPIO_SD_B1_09 is configured as FLEXSPI_A_DATA02 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01, /* GPIO_SD_B1_10 is configured as FLEXSPI_A_DATA01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B, /* GPIO_SD_B1_11 is configured as FLEXSPI_A_SS0_B */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
}
|
|
|
|
/***********************************************************************************************************************
|
|
* EOF
|
|
**********************************************************************************************************************/
|