65 lines
1.6 KiB
Plaintext
65 lines
1.6 KiB
Plaintext
Overview
|
|
========
|
|
The example shows how to use the SD card middleware with Azure RTOS.
|
|
|
|
This example will print the information of the SD card and format it
|
|
in FAT format. Then, do some file operation test - create, write,
|
|
read, close and so on.
|
|
|
|
|
|
Toolchain supported
|
|
===================
|
|
- IAR embedded Workbench 9.30.1
|
|
- Keil MDK 5.37
|
|
- GCC ARM Embedded 10.3.1
|
|
- MCUXpresso 11.6.0
|
|
|
|
Hardware requirements
|
|
=====================
|
|
- Mini/micro USB cable
|
|
- EVK-MIMXRT1020 board
|
|
- Personal Computer
|
|
- Micro SD card
|
|
|
|
Board settings
|
|
==============
|
|
Please insert a micro SD card into the card slot.
|
|
|
|
Prepare the Demo
|
|
================
|
|
1. Insert a micro SD card into the card slot
|
|
2. Connect a micro USB cable between the PC host and the OpenSDA USB port on the board.
|
|
3. Open a serial terminal on PC for OpenSDA serial device with these settings:
|
|
- 115200 baud rate
|
|
- 8 data bits
|
|
- No parity
|
|
- One stop bit
|
|
- No flow control
|
|
4. Download the program to the target board.
|
|
5. Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.
|
|
|
|
Running the demo
|
|
================
|
|
When the example runs successfully, the console will output like:
|
|
|
|
Start FileX SD Card example
|
|
Please insert a SD card.
|
|
SD card inserted.
|
|
Card size: 15728 MB
|
|
Card block size: 512 bytes
|
|
Card block count: 30720000
|
|
Voltage: 1.8V
|
|
Timing mode: SDR104
|
|
Formatted SD Card
|
|
|
|
Creat TEST.TXT
|
|
Open TEST.TXT
|
|
Write TEST.TXT
|
|
Read TEST.TXT
|
|
Close TEST.TXT
|
|
|
|
Continue the test (y/n):
|
|
|
|
If you want to test again, plese select 'y'.
|
|
If you want to remove the SD card, please select 'n' to end the test.
|