50 lines
2.4 KiB
Plaintext
50 lines
2.4 KiB
Plaintext
Supported Wi-Fi/BT/BLE modules
|
|
==============================
|
|
- AzureWave AW-NM191NF-uSD
|
|
- AzureWave AW-AM510-uSD
|
|
- AzureWave AW-CM358-uSD
|
|
- Murata uSD-M.2 Adapter (LBEE0ZZ1WE-uSD-M2) and Embedded Artists 2DS M.2 Module (EAR00386)
|
|
- Murata uSD-M.2 Adapter (LBEE0ZZ1WE-uSD-M2) and Embedded Artists 1ZM M.2 Module (EAR00364)
|
|
- Murata uSD-M.2 Adapter (LBEE0ZZ1WE-uSD-M2) and Embedded Artists 1XK M.2 Module (EAR00385)
|
|
- Murata uSD-M.2 Adapter (LBEE0ZZ1WE-uSD-M2) and Embedded Artists 2EL M.2 Module (EAR00409)
|
|
|
|
|
|
Murata Solution Board settings
|
|
==============================
|
|
Murata uSD-M.2 adapter resource page: https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/usd-m2-adapter
|
|
Murata uSD-M.2 adapter datasheet: https://www.murata.com/-/media/webrenewal/products/connectivitymodule/asset/pub/rfm/data/usd-m2_revb1.ashx
|
|
Embedded Artists M.2 module resource page: https://www.embeddedartists.com/m2
|
|
Embedded Artists 2DS module datasheet: https://www.embeddedartists.com/doc/ds/2DS_M2_Datasheet.pdf
|
|
Embedded Artists 1XK module datasheet: https://www.embeddedartists.com/doc/ds/1XK_M2_Datasheet.pdf
|
|
Embedded Artists 1ZM module datasheet: https://www.embeddedartists.com/doc/ds/1ZM_M2_Datasheet.pdf
|
|
Embedded Artists 2EL module datasheet: https://www.embeddedartists.com/doc/ds/2EL_M2_Datasheet.pdf
|
|
|
|
Jumper settings for Murata uSD-M.2 adapter:
|
|
- Both J12 & J13 = 1-2: WLAN-SDIO = 1.8V; and WLAN-CTRL = 3.3V
|
|
- J1 = 2-3: 3.3V from uSD connector
|
|
|
|
|
|
Modules Settings
|
|
================
|
|
Jumper settings on AzureWave AW-NM191NF-uSD Module:
|
|
- J11 1-2: VIO_SD 1.8V (Voltage level of SDIO pins is 1.8V)
|
|
- J2 1-2: 3.3V VIO_uSD (Power Supply from uSD connector)
|
|
|
|
Jumper settings on AzureWave AW-AM510-uSD Module:
|
|
- J4 1-2: VIO 1.8V (Voltage level of SDIO pins is 1.8V)
|
|
- J2 1-2: 3.3V VIO_uSD (Power Supply from uSD connector)
|
|
- The pin 1 of J4 is not marked on the board. Please note that pin numbering of J4 is opposite to J2 (pin 1 is close to the "J4" label):
|
|
3 2 1
|
|
o o=o J4
|
|
J2 o=o o
|
|
1 2 3
|
|
|
|
Jumper settings on AzureWave AW-CM358-uSD Module:
|
|
- J4 1-2: VIO 1.8V (Voltage level of SDIO pins is 1.8V)
|
|
- J2 1-2: 3.3V VIO_uSD (Power Supply from uSD connector)
|
|
- The pin 1 of J4 is not marked on the board. Please note that pin numbering of J4 is opposite to J2 (pin 1 is close to the "J4" label):
|
|
3 2 1
|
|
o o=o J4
|
|
J2 o=o o
|
|
1 2 3
|