Embedded_SDK/MCUXpresso_MIMXRT1052xxxxB
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
master
MCUXpresso_MIMXRT1052xxxxB/boards/evkbimxrt1050/azure_rtos_examples/spi_b2b_example/slave
History
Yilin Sun 6baf4427ce
Updated to v2.15.000 
Signed-off-by: Yilin Sun <imi415@imi.moe>
2024-03-18 23:15:10 +08:00
..
armgcc Updated to v2.15.000 2024-03-18 23:15:10 +08:00
board_setup.c SDK v2.11.1 2022-04-08 22:46:35 +08:00
board_setup.h SDK v2.11.1 2022-04-08 22:46:35 +08:00
board.c Updated to v2.15.000 2024-03-18 23:15:10 +08:00
board.h Updated to v2.15.000 2024-03-18 23:15:10 +08:00
clock_config.c Update SDK to v2.13.0 2023-01-26 09:35:56 +08:00
clock_config.h Update SDK to v2.13.0 2023-01-26 09:35:56 +08:00
dcd.c SDK v2.11.1 2022-04-08 22:46:35 +08:00
dcd.h SDK v2.11.1 2022-04-08 22:46:35 +08:00
pin_mux.c SDK v2.11.1 2022-04-08 22:46:35 +08:00
pin_mux.h SDK v2.11.1 2022-04-08 22:46:35 +08:00
readme.md Updated to v2.15.000 2024-03-18 23:15:10 +08:00
spi_b2b_example_slave_v3_14.xml Updated to v2.15.000 2024-03-18 23:15:10 +08:00
spi_b2b_example_slave.c SDK v2.11.1 2022-04-08 22:46:35 +08:00
tx_lpspi_slave.c SDK v2.11.1 2022-04-08 22:46:35 +08:00
tx_spi.h SDK v2.11.1 2022-04-08 22:46:35 +08:00
tx_user.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00

readme.md

Overview

The spi_b2b_example_slave example shows how to use LPSPI driver in Azure RTOS.

This example needs two boards, one is used as LPSPI master runnuing the spi_b2b_example_master example, and the other is used as LPSPI slave running the spi_b2b_example_slave example.

Start the spi_b2b_example_slave example first, then start the spi_b2b_example_master example.

SDK version

  • Version: 2.15.000

Toolchain supported

  • IAR embedded Workbench 9.40.1
  • Keil MDK 5.38.1
  • GCC ARM Embedded 12.2
  • MCUXpresso 11.8.0

Hardware requirements

  • Mini/micro USB cable
  • EVKB-IMXRT1050 board
  • Personal Computer
  • 5-pin flat cable

Board settings

Weld 0Ω resistor to R278,R279,R280,R281.

SPI1 pins are connected with SPI1 pins of another board

BOARD1(LPSPI1)          CONNECTS TO     BOARD2(LPSPI1)
Pin Name   Board Location     Pin Name  Board Location
PCS0        J24 pin 3           PCS0      J24 pin 3 
SOUT        J24 pin 4           SIN       J24 pin 5
SIN         J24 pin 5           SOUT      J24 pin 4
SCK         J24 pin 6           SCK       J24 pin 6
GND         J24 pin 7           GND       J24 pin 7

Note that one board works as SPI master, and the other works as SPI slave.

Prepare the Demo

  1. Connect a mini USB cable between the PC host and the OpenSDA USB port on the board.
  2. Open a serial terminal on PC for OpenSDA serial device with these settings:
    • 115200 baud rate
    • 8 data bits
    • No parity
    • One stop bit
    • No flow control
  3. Download the program to the target board.
  4. Reset the SoC and run the project.

Running the demo

After starting the example, the serial port will output:

Start the SPI board-to-board slave example

Ready to receive ... Slave received: 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x1e 0x1f

Slave transmited: 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x1e 0x1f

Master-to-slave data verified ok.