Yilin Sun
6baf4427ce
Signed-off-by: Yilin Sun <imi415@imi.moe> |
||
---|---|---|
.. | ||
armgcc | ||
board.c | ||
board.h | ||
clock_config.c | ||
clock_config.h | ||
dcd.c | ||
dcd.h | ||
dcp.c | ||
dcp_v3_14.xml | ||
evkbimxrt1050_sdram_init.jlinkscript | ||
pin_mux.c | ||
pin_mux.h | ||
readme.md |
readme.md
Overview
The DCP Example project is a demonstration program that uses the KSDK software implement several cryptography algorithms using the DCP software driver.
Note: Intput data and output buffer has to be in non-cached memory space.
SDK version
- Version: 2.15.000
Toolchain supported
- IAR embedded Workbench 9.40.1
- Keil MDK 5.38.1
- GCC ARM Embedded 12.2
- MCUXpresso 11.8.0
Hardware requirements
- Mini/micro USB cable
- EVKB-IMXRT1050 board
- Personal Computer
Board settings
No special settings are required.
Prepare the Demo
- Connect a USB cable between the host PC and the OpenSDA USB port on the target board.
- Open a serial terminal with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
- Download the program to the target board.
- Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.
Running the demo
Example output on terminal:
DCP Driver Example
AES ECB Test pass AES CBC Test pass SHA-1 Test pass SHA-256 Test pass