Embedded_SDK/MCUXpresso_MIMXRT1052xxxxB
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
master
MCUXpresso_MIMXRT1052xxxxB/boards/evkbimxrt1050/driver_examples/semc/sdram/pin_mux.c
imi415 de50ed4c3d
SDK v2.11.1
2022-04-08 22:46:35 +08:00

199 lines
15 KiB
C
Raw Permalink Blame History

/*
* Copyright 2017-2021 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/***********************************************************************************************************************
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
**********************************************************************************************************************/
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
!!GlobalInfo
product: Pins v9.0
processor: MIMXRT1052xxxxB
package_id: MIMXRT1052DVL6B
mcu_data: ksdk2_0
processor_version: 0.0.0
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "pin_mux.h"
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitBootPins
* Description : Calls initialization functions.
*
* END ****************************************************************************************************************/
void BOARD_InitBootPins(void) {
BOARD_InitPins();
}
/*
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
BOARD_InitPins:
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
- pin_list:
- {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable}
- {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable}
- {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Down_100K_Ohm, pull_keeper_enable: Enable,
open_drain: Disable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01, hysteresis_enable: Enable, pull_keeper_enable: Enable, speed: MHZ_200, drive_strength: R0_7,
slew_rate: Fast}
- {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02, hysteresis_enable: Enable, pull_keeper_enable: Enable, speed: MHZ_200, drive_strength: R0_7,
slew_rate: Fast}
- {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03, hysteresis_enable: Enable, pull_keeper_enable: Enable, speed: MHZ_200, drive_strength: R0_7,
slew_rate: Fast}
- {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04, hysteresis_enable: Enable, pull_keeper_enable: Enable, speed: MHZ_200, drive_strength: R0_7,
slew_rate: Fast}
- {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27, hysteresis_enable: Enable, pull_keeper_select: Keeper, speed: MHZ_200, drive_strength: R0_7,
slew_rate: Fast}
- {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39, software_input_on: Enable, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7,
slew_rate: Fast}
- {pin_num: A7, peripheral: SEMC, signal: semc_rdy, pin_signal: GPIO_EMC_40, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
- {pin_num: C7, peripheral: SEMC, signal: 'CSX, 0', pin_signal: GPIO_EMC_41, hysteresis_enable: Enable, speed: MHZ_200, drive_strength: R0_7, slew_rate: Fast}
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
*/
/* FUNCTION ************************************************************************************************************
*
* Function Name : BOARD_InitPins
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitPins(void) {
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DA00, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DA01, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DA02, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DA03, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DA04, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DA05, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DA06, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DA07, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DA08, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DA09, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DA10, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DA11, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DA12, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DA13, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DA14, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DA15, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 1U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_SEMC_RDY, 0U);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_SEMC_CSX0, 0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0x10B0U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_00_SEMC_DA00, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_01_SEMC_DA01, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_02_SEMC_DA02, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_03_SEMC_DA03, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_04_SEMC_DA04, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_05_SEMC_DA05, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_06_SEMC_DA06, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_07_SEMC_DA07, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_28_SEMC_WE, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_30_SEMC_DA08, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_31_SEMC_DA09, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_32_SEMC_DA10, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_33_SEMC_DA11, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_34_SEMC_DA12, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_35_SEMC_DA13, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_36_SEMC_DA14, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_37_SEMC_DA15, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_40_SEMC_RDY, 0x0110F9U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_41_SEMC_CSX0, 0x0110F9U);
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/
Reference in New Issue View Git Blame Copy Permalink