Yilin Sun
6baf4427ce
Signed-off-by: Yilin Sun <imi415@imi.moe> |
||
|---|---|---|
| .. | ||
| armgcc | ||
| doc | ||
| hal | ||
| FreeRTOSConfig.h | ||
| board.c | ||
| board.h | ||
| board_init.c | ||
| board_init.h | ||
| camera_support.c | ||
| camera_support.h | ||
| camera_view.c | ||
| clock_config.c | ||
| clock_config.h | ||
| dcd.c | ||
| dcd.h | ||
| display_support.c | ||
| display_support.h | ||
| evkbimxrt1050_sdram_init.jlinkscript | ||
| mpp_camera_view_v3_14.xml | ||
| mpp_config.h | ||
| pin_mux.c | ||
| pin_mux.h | ||
| readme.md | ||
readme.md
Overview
This basic example shows how to use the library to create a simple camera preview pipeline. This example also shows how to stop and re-start the pipeline after 3 seconds.
Toolchains supported
- MCUXpresso, version 11.8.0
- GCC Arm Embedded, version 12.2.Rel1
SDK version
- Version: 2.15.000
Toolchain supported
- GCC ARM Embedded 12.2
- MCUXpresso 11.8.0
Hardware requirements
- Mini/micro USB cable
- EVKB-IMXRT1050 board
- Personal computer
- MT9M114 camera (optional)
- RK043FN02H-CT display (optional)
Board settings
Connect the camera to J35 (optional) Connect the display to A1-A40 and B1-B6 (optional) Connect external 5V power supply to J2, set J1 to 1-2
Prepare the Demo
- Connect a USB cable between the host PC and the OpenSDA USB port on the target board.
- Open a serial terminal with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
- Download the program to the target board.
- Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.
Running the demo
EXPECTED OUTPUTS: The expected outputs of the example are:
- The images captured by the camera should be displayed on the screen