Yilin Sun
6baf4427ce
Signed-off-by: Yilin Sun <imi415@imi.moe> |
||
---|---|---|
.. | ||
armgcc | ||
AA4_B_20.c | ||
AA4_B_40.c | ||
AA4_B_100.c | ||
Alarm.c | ||
Font_13_R.c | ||
Info.c | ||
Resource.h | ||
Weather.c | ||
bmArrowLeft_23x24.c | ||
bmArrowRight_23x24.c | ||
bmBell_40x40.c | ||
bmBell_60x60.c | ||
bmNXP_110x44.c | ||
bmRainy_45x34.c | ||
bmSeggerLogo_110x55.c | ||
bmStormy_45x34.c | ||
bmSunny_45x34.c | ||
board.c | ||
board.h | ||
clock_config.c | ||
clock_config.h | ||
dcd.c | ||
dcd.h | ||
emwin_slide_show.c | ||
emwin_slide_show_v3_14.xml | ||
emwin_support.c | ||
emwin_support.h | ||
evkbimxrt1050_sdram_init.jlinkscript | ||
pin_mux.c | ||
pin_mux.h | ||
readme.md |
readme.md
Overview
The example demonstrates graphical widgets of the emWin library.
SDK version
- Version: 2.15.000
Toolchain supported
- IAR embedded Workbench 9.40.1
- Keil MDK 5.38.1
- GCC ARM Embedded 12.2
- MCUXpresso 11.8.0
Hardware requirements
- Micro USB cable
- EVKB-IMXRT1050 board
- RK043FN02H-CT or RK043FN66HS-CT6 LCD board
- Personal Computer
Board settings
- Connect the RK043FN02H-CT or RK043FN66HS-CT6 to board.
Prepare the Demo
- Connect a USB cable between the host PC and the OpenSDA USB port on the target board.
- Open a serial terminal with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
- Build the project, the project uses RK043FN66HS-CT6 by default, to use other panels, change #define DEMO_PANEL DEMO_PANEL_RK043FN66HS to #define DEMO_PANEL DEMO_PANEL_RK043FN02H in emwin_support.h
- Download the program to the target board.
- Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.
Running the demo
If this example runs correctly, the sample GUI is displayed.