34 lines
1.4 KiB
Plaintext
34 lines
1.4 KiB
Plaintext
Hardware requirements
|
|
=====================
|
|
- Mini/micro USB cable
|
|
- IMXRT1050-EVKB board
|
|
- 3.3V CAN transceiver
|
|
- Supported CAN interface (IXXAT, Vector, Kvaser, etc.)
|
|
- Personal Computer
|
|
- FreeMASTER 2.5 or later installed on PC
|
|
|
|
Board settings
|
|
==============
|
|
CAN transceiver is available on board, at pins J11
|
|
|
|
Prepare the demo
|
|
===============
|
|
1. Connect a USB cable between the host PC and the Debug USB port on the target board.
|
|
2. Connect CAN transceiver to CAN interface on PC. Make sure the CAN bus is properly terminated.
|
|
3. Compile and download the program to the target microcontroller.
|
|
4. Run and resume application execution when debugger stops in the main() function.
|
|
|
|
Connect with FreeMASTER
|
|
=======================
|
|
5. Run FreeMASTER, use the Connection Wizard or open Project Options.
|
|
6. Select FreeMASTER-over-CAN communication plug-in at 500kbps.
|
|
7. Start communication, FreeMASTER loads the initial TSA Active Content links in the Welcome page.
|
|
8. Click the "FreeMASTER Demonstration Project (embedded in device)" in the Welcome page.
|
|
9. The demo is now running, you should be able to watch variable values and graphs.
|
|
|
|
More information
|
|
================
|
|
Read more information about FreeMASTER tool at http://www.nxp.com/freemaster.
|
|
Feel free to ask questions and report issues at FreeMASTER's
|
|
community page at https://community.nxp.com/community/freemaster
|