36 lines
1.6 KiB
Plaintext
36 lines
1.6 KiB
Plaintext
Hardware requirements
|
|
=====================
|
|
- Mini/micro USB cable
|
|
- Target microcontroller board
|
|
- Personal Computer
|
|
- FreeMASTER 3.1.2 with TCP/UDP communication plug-in installed
|
|
|
|
Board settings
|
|
============
|
|
No special settings are required. By default this demo communicates over an Ethernet
|
|
network. Make sure to connect the Ethernet cable to the board and interconnect it with
|
|
the PC using a network switch. The demo uses static IP address or an address obtained
|
|
from DHCP. Refer to network.c (EXAMPLE_USE_DHCP) file for more details about default IP
|
|
address.
|
|
|
|
Prepare the demo
|
|
===============
|
|
1. Interconnect the board with a switch and the host computer.
|
|
2. Compile and download the program to the target microcontroller.
|
|
3. Run and resume application execution when debugger stops in the main() function.
|
|
|
|
Connect with FreeMASTER
|
|
=======================
|
|
4. Run FreeMASTER, use the Connection Wizard or open Project Options.
|
|
5. Select network communication and configure the plug-in for TCP or UDP protocol with the port
|
|
that matches the settings in the freemaster_cfg.h.
|
|
6. Start communication, FreeMASTER loads the initial TSA Active Content links in the Welcome page.
|
|
7. Click the "FreeMASTER Demonstration Project (embedded in device)" in the Welcome page.
|
|
8. The demo is now running, you should be able to watch variable values and graphs.
|
|
|
|
More information
|
|
================
|
|
Read more information about FreeMASTER tool at http://www.nxp.com/freemaster.
|
|
Feel free to ask questions and report issues at FreeMASTER's
|
|
community page at https://community.nxp.com/community/freemaster
|