Embedded_SDK
/
MCUXpresso_MIMXRT1052xxxxB
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
MCUXpresso_MIMXRT1052xxxxB/boards/evkbimxrt1050/freertos_examples/freertos_hello
History
Yilin Sun 6baf4427ce
Updated to v2.15.000 
Signed-off-by: Yilin Sun <imi415@imi.moe>
 		2024-03-18 23:15:10 +08:00
..
armgcc Updated to v2.15.000 2024-03-18 23:15:10 +08:00
FreeRTOSConfig.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
board.c Updated to v2.15.000 2024-03-18 23:15:10 +08:00
board.h Updated to v2.15.000 2024-03-18 23:15:10 +08:00
clock_config.c Updated to v2.14.0 2023-11-30 20:55:00 +08:00
clock_config.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
dcd.c Updated to v2.14.0 2023-11-30 20:55:00 +08:00
dcd.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
evkbimxrt1050_sdram_init.jlinkscript Updated to v2.14.0 2023-11-30 20:55:00 +08:00
freertos_hello.c Updated to v2.14.0 2023-11-30 20:55:00 +08:00
freertos_hello_v3_14.xml Updated to v2.15.000 2024-03-18 23:15:10 +08:00
pin_mux.c Updated to v2.14.0 2023-11-30 20:55:00 +08:00
pin_mux.h Updated to v2.14.0 2023-11-30 20:55:00 +08:00
readme.md Updated to v2.15.000 2024-03-18 23:15:10 +08:00

readme.md

Overview

The Hello World project is a simple demonstration program that uses the SDK UART drivere in combination with FreeRTOS. The purpose of this demo is to show how to use the debug console and to provide a simple project for debugging and further development.

The example application creates one task called hello_task. This task print "Hello world." message via debug console utility and suspend itself.

SDK version

  • Version: 2.15.000

Toolchain supported

  • IAR embedded Workbench 9.40.1
  • GCC ARM Embedded 12.2
  • Keil MDK 5.38.1
  • MCUXpresso 11.8.0

Hardware requirements

  • Mini/micro USB cable
  • EVKB-IMXRT1050 board
  • Personal Computer

Board settings

No special settings are required.

Prepare the Demo

  1. Connect a USB cable between the host PC and the OpenSDA USB port on the target board.
  2. Open a serial terminal with the following settings:
    • 115200 baud rate
    • 8 data bits
    • No parity
    • One stop bit
    • No flow control
  3. Download the program to the target board.
  4. Either press the reset button on your board or launch the debugger in your IDE to begin running the demo. Running the demo ================ After the board is flashed the Tera Term will print "Hello world" message on terminal.

Example output: Hello world.